20230419 cortex-a7 点灯试验

最新推荐文章于 2024-11-13 22:18:52 发布

usux8025

最新推荐文章于 2024-11-13 22:18:52 发布

阅读量79

点赞数

文章标签：单片机 stm32

本文链接：https://blog.csdn.net/qq_34218918/article/details/130253033

版权

.global _start
_start: 
 
/**********LED1点亮**************/
@pe10 a28[4] 50006000
LED1_INIT:
	@1.通过RCC_AHB4_ENSETR:0x50000A28寄存器设置GPIOE控制器使能 0x50000A28[4] = 1
	ldr r0,=0x50000A28
	ldr r1,[r0] @将r0寄存器地址中的值，读到r1寄存器中
	orr r1,r1,#(0x1 << 4) 
	@将r1寄存器中的第4位置1
	str r1,[r0]
 
	@2.通过GPIOE_MODER:0x50006000寄存器设置PE10引脚为输出模式 0x50006000[21:20]= 01
	ldr r0,=0x50006000
	ldr r1,[r0]
	and r1,r1,#(~(0x3 << 20))
	orr r1,r1,#(0x1 << 20)
	str r1,[r0]
 
	@3.通过GPIOE_OTYPER:0x50006004寄存器设置PE10引脚为推挽输出模式 0x50006004[10]= 0
	ldr r0,=0x50006004
	ldr r1,[r0]
	and r1,r1,#(~(0x1 << 10))
	str r1,[r0]
 
	@4.通过GPIOE_OSPEEDR:0x50006008寄存器设置PE10引脚为低速输出模式0x50006008[21:20]= 00
	ldr r0,=0x50006008
	ldr r1,[r0]
	and r1,r1,#(~(0x3 << 20))
	str r1,[r0]
 
	@5.通过GPIOE_PUPDR:0x5000600C寄存器设置PE10引脚为禁止上下拉0x5000600C[21:20]= 00
	ldr r0,=0x5000600C
	ldr r1,[r0]
	and r1,r1,#(~(0x3 << 20))
	str r1,[r0]

@pf10 a28[5] 50007000
LED2_INIT:
	ldr r0,=0x50000A28
	ldr r1,[r0]
	orr r1,r1,#(0x1 << 5) 
	str r1,[r0]
 
	ldr r0,=0x50007000
	ldr r1,[r0]
	and r1,r1,#(~(0x3 << 20))
	orr r1,r1,#(0x1 << 20)
	str r1,[r0]
 
	ldr r0,=0x50007004
	ldr r1,[r0]
	and r1,r1,#(~(0x1 << 10))
	str r1,[r0]
 
	ldr r0,=0x50007008
	ldr r1,[r0]
	and r1,r1,#(~(0x3 << 20))
	str r1,[r0]
 
	ldr r0,=0x5000700C
	ldr r1,[r0]
	and r1,r1,#(~(0x3 << 20))
	str r1,[r0]

@pe8 a28 4 50006000
LED3_INIT:
	ldr r0,=0x50000A28
	ldr r1,[r0]
	orr r1,r1,#(0x1 << 4) 
	str r1,[r0]
 
	ldr r0,=0x50006000
	ldr r1,[r0]
	and r1,r1,#(~(0x3 << 16))
	orr r1,r1,#(0x1 << 16)
	str r1,[r0]
 
	ldr r0,=0x50006004
	ldr r1,[r0]
	and r1,r1,#(~(0x1 << 8))
	str r1,[r0]
 
	ldr r0,=0x50006008
	ldr r1,[r0]
	and r1,r1,#(~(0x3 << 16))
	str r1,[r0]
 
	ldr r0,=0x5000600C
	ldr r1,[r0]
	and r1,r1,#(~(0x3 << 16))
	str r1,[r0]
 
loop:
	bl LED1_ON
	bl delay_1s
	bl LED1_OFF
	bl delay_1s

	bl LED2_ON
	bl delay_1s
	bl LED2_OFF
	bl delay_1s

	bl LED3_ON
	bl delay_1s
	bl LED3_OFF
	bl delay_1s
	b loop
 
LED1_ON:
	@1.通过GPIOE_ODR:0x50006014寄存器设置PE10引脚为输出高电平 0x50006014[10]= 1
	ldr r0,=0x50006014
	ldr r1,[r0]
	orr r1,r1,#(0x1 << 10)
	str r1,[r0]
	mov pc,lr
 

LED1_OFF:
	@1.通过GPIOE_ODR:0x50006014寄存器设置PE10引脚为输出低电平 0x50006014[10]= 0
	ldr r0,=0x50006014
	ldr r1,[r0]
	and r1,r1,#(~(0x1 << 10))
	str r1,[r0]
	mov pc,lr

 
LED2_ON:
	ldr r0,=0x50007014
	ldr r1,[r0]
	orr r1,r1,#(0x1 << 10)
	str r1,[r0]
	mov pc,lr
 

LED2_OFF:
	ldr r0,=0x50007014
	ldr r1,[r0]
	and r1,r1,#(~(0x1 << 10))
	str r1,[r0]
	mov pc,lr

LED3_ON:
	ldr r0,=0x50006014
	ldr r1,[r0]
	orr r1,r1,#(0x1 << 8)
	str r1,[r0]
	mov pc,lr
 

LED3_OFF:
	ldr r0,=0x50006014
	ldr r1,[r0]
	and r1,r1,#(~(0x1 << 8))
	str r1,[r0]
	mov pc,lr

 
@ 大概1s的延时函数
delay_1s:
	mov r3, #0x10000000
	mm:
	cmp r3, #0
	subne r3, r3, #1
	bne mm
	mov pc, lr
 
.end