STM32F103 基于UDS的BOOTLOADER

最新推荐文章于 2024-10-04 15:51:59 发布

qq_34309267

最新推荐文章于 2024-10-04 15:51:59 发布

阅读量1.7k

点赞数 1

分类专栏： UDS 文章标签： flash

本文链接：https://blog.csdn.net/qq_34309267/article/details/107416329

版权

UDS 专栏收录该内容

9 篇文章 16 订阅

订阅专栏

1.对于BOOTLODER来讲，首先要讲FLASH分好区
BOOTLODER
在这里插入图片描述

APP
在这里插入图片描述

2.跳转函数
Boot_JumpToApplication(0x08008000);
具体内容如下：
void Boot_JumpToApplication(uint32_t Addr)
{
static pFunction Jump_To_Application;
__IO uint32_t JumpAddress;
/* Test if user code is programmed starting from address “ApplicationAddress” /
if ((((__IO uint32_t*)Addr) & 0x2FFE0000 ) == 0x20000000)
{
/* Jump to user application /
JumpAddress = (__IO uint32_t) (Addr + 4);
Jump_To_Application = (pFunction) JumpAddress;
__set_PRIMASK(1);
/ Initialize user application’s Stack Pointer /
__set_MSP((__IO uint32_t*)Addr);
Jump_To_Application();
}
}

3.协议栈
static uint8_t xCAN_App10Service(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App11Service(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App14Service(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App19Service(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App22Service(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App2EService(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App27Service(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App28Service(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App31Service(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App34Service(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App36Service(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App37Service(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App3EService(uint8_t* buf,uint32_t size);
static uint8_t xCAN_App85Service(uint8_t* buf,uint32_t size);

如有需要，可咨询qq:352365782