(一)Mat矩阵(图像容器)创建时CV_8UC1,CV_8UC2等参数详解
Mat不但是一个非常有用的图像容器类,同时也是一个通用的矩阵类.创建一个Mat对象的方法很多,我们现在先看一下Mat矩阵/图像容器类在OpenCv中的有关源代码:
使用Mat图像容器类创建Mat类的对象
//! default constructor
Mat();
//! constructs 2D matrix of the specified size and type
// (_type is CV_8UC1, CV_64FC3, CV_32SC(12) etc.)
Mat(int rows, int cols, int type);
Mat(Size size, int type);
//! constucts 2D matrix and fills it with the specified value _s.
Mat(int rows, int cols, int type, const Scalar& s);
Mat(Size size, int type, const Scalar& s);
//! constructs n-dimensional matrix
Mat(int ndims, const int* sizes, int type);
Mat(int ndims, const int* sizes, int type, const Scalar& s);
我们可以看见,创建Mat矩阵/图像容器类的很多构造方法或者其他成员方法在创建Mat对象的时候,都需要指定type--所创建图像/矩阵的类型。 那么类型是什么呢?OpenCv的源代码中说了一句:
(_type is CV_8UC1, CV_64FC3, CV_32SC(12) etc.) |
通过转到定义法,看一下CV_8UC1,CV_64FC3等这些宏。
这里的type可以是任何的预定义类型,预定义类型的结构如下所示:
CV_<bit_depth>(S|U|F)C<number_of_channels> |
1--bit_depth---比特数---代表8bite,16bites,32bites,64bites---举个例子吧--比如说,如
|
创建Mat类对象:
// (_type is CV_8UC1, CV_64FC3, CV_32SC(12) etc.)
Mat(int rows, int cols, int type);
通过上面的讲解,现在,我们解读一下OpenCv的源代码:
//【1】CV_8UC1---则可以创建----8位无符号的单通道---灰度图片------grayImg
#define CV_8UC1 CV_MAKETYPE(CV_8U,1)
#define CV_8UC2 CV_MAKETYPE(CV_8U,2)
//【2】CV_8UC3---则可以创建----8位无符号的三通道---RGB彩色图像---colorImg
#define CV_8UC3 CV_MAKETYPE(CV_8U,3)
//【3】CV_8UC4--则可以创建-----8位无符号的四通道---带透明色的RGB图像
#define CV_8UC4 CV_MAKETYPE(CV_8U,4)
(二)Mat矩阵图像容器类创建Mat类对象常用的几种方法:
- 1)使用Mat矩阵图像容器类的构造函数创建Mat类对象
//【1】载入原始图像1.jpg
int flag;
Mat srcImg=imread("1.jpg",flag); //flag = 0 表示灰度图; 1表示原图
//【2】创建一个和原始图像srcImg高和宽一致的8位无符号单通道的灰度图片容器,并且初始化图片为白色255
Mat grayImg(srcImg.rows,srcImg.cols,CV_8UC1,Scalar(255));
- 2)为已经存在的IplImage指针创建信息头
//【1】声明IplImg指针
IplImg* imgTopDown;
//【2】将图片加载到内存中
imgTopDown=cvLoadImage("1.jpg", CV_LOAD_IMAGE_GRAYSCALE);
//【3】为已经存在的imgTopDown指针创建信息头
//【4】转换IplImage*--->Mat
Mat mtx(imgTopDown);
- 3)利用Create()函数创建Mat矩阵图像容器类的对象
//【1】载入原始图像1.jpg
Mat srcImg=imread("1.jpg",1);
//【2】创建一个和原始图像srcImg高和宽一致的8位无符号单通道的灰度图片容器,并且初始化图片为白色255
Mat dstImg.create(srcImg.rows,srcImg.cols,CV_8UC1);
- 4)使用Matlab风格的函数创建Mat矩阵图形容器类的对象
//! Matlab-style matrix initialization
static MatExpr zeros(int rows, int cols, int type);
static MatExpr zeros(Size size, int type);
static MatExpr zeros(int ndims, const int* sz, int type);
static MatExpr ones(int rows, int cols, int type);
static MatExpr ones(Size size, int type);
static MatExpr ones(int ndims, const int* sz, int type);
static MatExpr eye(int rows, int cols, int type);
static MatExpr eye(Size size, int type);
//【1】载入原始图像1.jpg
Mat srcImg=imread("1.jpg",1);
//【2】创建一个和原始图像srcImg高和宽一致的8位无符号单通道的灰度图片容器,并且初始化图片为白色255
Mat dstImg=Mat::zeros(srcImg.rows,srcImg.cols,CV_8UC3);
Mat dstImg=Mat::ones(srcImg.rows,srcImg.cols,CV_8UC3);
Mat dstImg=Mat::eye(srcImg.rows,srcImg.cols,CV_8UC3);