报错信息:
在Cam上采集图像失败!错误:0xe1000014“The buffer was incompletely grabbed. This can be caused by performance problems of the network hardware used, i.e. network adapter, switch, or ethernet cable. To fix this, try increasing the camera's Inter-Packet Delay in the Transport Layer category to reduce the required bandwidth, and adjust the camera's Packet Size setting to the highest supported frame size.”
解决方案:
参考https://blog.csdn.net/qq_34192019/article/details/96473333
1. 打开“网络和Internet”->网络连接->以太网->右键属性->配置,选择巨帧数据包,将值调到最大。
2. pylon viewer中将用户模式调至大师级或专家级,能看到Transport Layer的参数设置即可。
3. 将Packet Size调至和巨型帧一样的9014即可。
温馨提示:调试完相机后请将以太网配置中“巨帧数据包”禁用,否则上网会有问题哦