keil , Debug菜单 - Reset菜单选项（Autodetect/HWreset/sysresetReq/Vectreset）含义

1、Reset — HW RESET performs a hardware reset by asserting the hardware reset (HW RESET) signal.
复位-硬件复位通过置位硬件复位（HW RESET）信号来执行硬件复位。

2、Reset — SYSRESETREQ performs a software reset by setting the SYSRESETREQ bit. The Cortex-M core and on-chip peripherals are reset.
通过将SYSRESETREQ位置1来执行软件复位。 Cortex-M内核和片上外设被重置。

3、Reset — VECTRESET performs a software reset by setting the VECTRESET bit. Only the Cortex-M core is reset. The on-chip peripherals are not affected. For some Cortex-M devices, VECTRESET is the only way to reset the core. VECTRESET is not supported on Cortex-M0 and Cortex-M1 cores.
复位-VECTRESET通过将VECTRESET位置1来执行软件复位。 仅Cortex-M内核被重置。 片上外设不受影响。 对于某些Cortex-M设备，VECTRESET是重置内核的唯一方法。 Cortex-M0和Cortex-M1内核不支持VECTRESET。

4、Reset — Autodetect selects one of the above reset methods based on the target device. The SYSRESETREQ method is used if an unknown device is detected.
重置-自动检测根据目标设备选择上述重置方法之一。 如果检测到未知设备，则使用SYSRESETREQ方法。

note：
SWD模式下，Debug菜单中，Reset菜单选（Autodetect/HWreset/sysresetReq/Vectreset）默认是AutoDetect，改成SysResetReq即可