【IC设计】ICC workshop Lab1 数据准备&基本流程 【脚本总结】

Task 1 Create a Milkyway library

先进入lab1_data_setup目录，打开icc_shell，创建项目

create_mw_lib -technology $tech_file -mw_reference_library "$mw_path/sc $mw_path/io $mw_path/ram16x128" -bus_naming_style {[%d]} -open $my_mw_lib

然后ls risc_chip.mw查看是否创建成功

Task 2 Load the Nestlist,TLU+,Constraints and Controls

import_designs $verilog_file -format verilog -top $top_design
set_tlu_plus_files -max_tluplus $tlup_max -min_tluplus $tlup_min -tech2itf_map $tlup_map
check_library
check_tlu_plus_files
list_libs
source $derive_pg_file
check_mv_design -power_nets
read_sdc $sdc_file
check_timing
report_timing_requirements
report_disable_timing
report_case_analysis
report_clock
report_clock -skew
source $ctrl_file
source sc[TAB]z[TAB]
exec cat zic.timing
remove_ideal_network [get_ports scan_en]
save_mw_cel -as RISC_CHIP_data_setup

Task3 design planning

read_def $def_file
set_pnet_options -complete {METAL3 METAL4}
save_mw_cel -as RISC_CHIP_floorplanned

Task4 placement

place_opt
redirect -tee place_opt.timing {report_timing}
report_congestion -grc_based -by_layer -routing_stage global
save_mw_cel -as RISC_CHIP_placed

Task5 CTS

remove_clock_uncertainty [all_clocks]
set_fix_hold [all_clocks]
clock_opt
redirect -tee clock_opt.timing {report_timing}
save_mw_cel -as RISC_CHIP_cts

Task6 Basic Flow:Routing

File->Open design ，risc_chip.mw
Select RISC_CHIP_cts
相当于open_mw_cel RISC_CHIP_cts

source $ctrl_file
route_opt
view report_timing -nosplit
v rt
v rt -delay min
report_design -physical
save_mw_cel -as RISC_CHIP_routed
exit