ADS导入Angelov模型
ADS支持ICCAP导出的mps和lib格式的文件。
具体步骤如下:
1)由于angelov GaN是veriloga的模型,所以要先把veriloga的designKit加进来
根据ADS的manual,下面是这一步的具体操作:
From the ADS Main window,
1> Choose DesignKit > Manage Favorite
Design Kits to display the Manage Favorite Design Kits dialog box.
2> Since the Design Kit is delivered as
an unzipped file, simply click the Add Library Definition File and browse to
$HPEESOF_DIR/tiburonda/ads/designkits/tiburon-da_veriloga.(ADS安装路径下)
3> Select the lib.defs file and click
Open.—————添加之后就可以了!
4> The Add Design Kit dialog box appears
to add the design kit to current workspace. Click OK.
5> If a design is open, a warning
“All designs must be closed to Add a Design Kit” appears.
6> Close all the designs and click OK to
add the design kit to your current workspace.
7> Close the Manage Favorite Design Kits
dialog box and open a schematic window. The Devices-Verilog-A palette should
now be available in the Component Palette List. The following figure shows the
icons for each of the devices and models available in the Devices-Verilog-A
palette.
2)这样在ADS就出现了Devices-Verilog-A的库。
3)接下来load Model card,这里有两种办法。
a. 使用tools->IC-CAP import->Any Device
选择之后,输入angelov_gan_va_Model (注意大小写)
然后弹出对话框,选择之前生成的mps文档。
load好之后的结果:
b.使用DynamicLink->Add Netlist File Include。
双击图标选择 之前生成的lib即可。(注意lib里load verilogA文件的路径一定要正确)
a和b相比,a会更灵活一些,可以进行参数的tunning。