NRF52 nrf_drv_spi_transfer函数详解

When you call nrf_drv_spi_transfer(&m_spi_m, tx_buffer, tx_bytes, rx_buffer, rx_bytes), specify value for tx_bytes, it is the number of bytes you want to put on the SPI master-out pin; rx_bytes refers to the number of bytes you want to fill for the rx_buffer, beginning at the start of your transaction.
For example, a register read on a SPI peripheral requires first writing the address of register you want to read, SPI peripheral will return the value of that register as soon as you finish writing the address. In this case tx_bytes is 1, rx_bytes is 2. When the call completes with call back, you will get the read from rx_buffer[1].
In general, if you want to tx x bytes, and receive y bytes after x bytes has been transferred, rx_buffer needs to be the size of (x + y). A valid read back value will start at rx_buffer[x] for the length of y.
重点：发送X个字节的数据，接受Y个字节的数据，则接收缓冲区至少有X+Y个字节的长度，而接收到的数据从rx_buffer[x]开始，长度为y。