在MGRE下用OSPF配通网络

1.基础配置

[r1]int g 0/0/0
[r1-GigabitEthernet0/0/0]ip add 21.0.0.1 24
[r1-GigabitEthernet0/0/0]int g 0/0/1
[r1-GigabitEthernet0/0/1]ip add 22.0.0.1 24
[r1-GigabitEthernet0/0/1]int l0
[r1-LoopBack0]ip add 1.1.1.1 24
​
​
[ISP-GigabitEthernet0/0/0]ip add 21.0.0.2 24
[ISP-GigabitEthernet0/0/1]ip add 22.0.0.2 24
[ISP-GigabitEthernet0/0/2]ip add 23.0.0.2 24 
[ISP-GigabitEthernet4/0/0]ip add 24.0.0.2 24
[ISP-GigabitEthernet4/0/1]ip add 25.0.0.2 24
[ISP-GigabitEthernet4/0/2]ip add 26.0.0.2 24
​
[r3-GigabitEthernet0/0/0]ip add 23.0.0.1 24
[r3-LoopBack0]ip add 3.3.3.3 24
​
[r4-GigabitEthernet0/0/0]ip add 24.0.0.1 24
[r4-LoopBack0]ip add 4.4.4.4 24
​
[r5-GigabitEthernet0/0/0]ip add 25.0.0.1 24
[r5-LoopBack0]ip add 5.5.5.5 24
​
[r6-GigabitEthernet0/0/0]ip add 25.0.0.1 24
[r6-LoopBack0]ip add 6.6.6.6 24

[r1]ip route-static 0.0.0.0 0 21.0.0.2
[r1]ip route-static 0.0.0.0 0 22.0.0.2 
​
[r3]ip add 23.0.0.1 24
​
[r4]ip route-static 0.0.0.0 0 24.0.0.2
​
[r5]ip route-static 0.0.0.0 0 25.0.0.2
​
[r6]ip route-static 0.0.0.0 0 26.0.0.23
配置缺省路由表，确保公网联通性

2.R1,R3,R4配置MGRE环境

[r1-Tunnel0/0/0]ip add 192.168.2.1 24
[r1-Tunnel0/0/0]tunnel-protocol gre p2mp
[r1-Tunnel0/0/0]source 21.0.0.1
[r1-Tunnel0/0/0]nhrp network-id 10
[r1-Tunnel0/0/0]nhrp entry multicast  dynamic 
[r1-Tunnel0/0/0]nhrp entry 192.168.2.3 23.0.0.1 register 
[r1-Tunnel0/0/0]nhrp entry 192.168.2.4 24.0.0.1 register
​
[r3-Tunnel0/0/0]ip add 192.168.2.3 24
[r3-Tunnel0/0/0]tunnel-protocol gre p2mp
[r3-Tunnel0/0/0]source 21.0.0.1
[r3-Tunnel0/0/0]nhrp entry 192.168.2.1 21.0.0.1 register 
[r3-Tunnel0/0/0]nhrp entry 192.168.2.4 24.0.0.1 register
​
[r4-Tunnel0/0/0]ip add 192.168.2.4 24
[r4-Tunnel0/0/0]tunnel-protocol gre p2mp
[r4-Tunnel0/0/0]source 24.0.0.1 
[r4-Tunnel0/0/0]nhrp network-id 10
[r4-Tunnel0/0/0]nhrp entry multicast dynamic 开启广播

3.R1,R5,R6建立点到多点的MGRE环境

[r1-Tunnel0/0/1]ip add 192.168.7.1 24
[r1-Tunnel0/0/1]tunnel-protocol gre p2mp
[r1-Tunnel0/0/1]source 22.0.0.1
[r1-Tunnel0/0/1]nhrp network-id 100
[r1-Tunnel0/0/1]nhrp entry multicast dynamic 
​
[r5-Tunnel0/0/0]ip add 192.168.7.2 24
[r5-Tunnel0/0/0]tunnel-protocol gre p2mp
[r5-Tunnel0/0/0]source 25.0.0.1 
[r5-Tunnel0/0/0]nhrp network-id 100
[r5-Tunnel0/0/0]nhrp entry 192.168.7.1 22.0.0.1 register 
​
[r6-Tunnel0/0/0]ip add 192.168.7.3 24
[r6-Tunnel0/0/0]tunnel-protocol gre p2mp
[r6-Tunnel0/0/0]source 26.0.0.1
[r6-Tunnel0/0/0]nhrp network-id 100
[r6-Tunnel0/0/0]nhrp entry 192.168.7.1 22.0.0.1 register 
​

4.用OSPF配通全网

[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]area 0
[r1-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.255
[r1-ospf-1-area-0.0.0.0]network 192.168.2.0 0.0.0.255
[r1-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255
[r1-Tunnel0/0/0]ospf network-type broadcast (让r1与r3和r4建邻，让路由表完整)
[r1-Tunnel0/0/0]ospf network-type p2mp(让r1与r5和r6建邻，让路由表完整)
​
​
[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.255
[r3-ospf-1-area-0.0.0.0]network 192.168.2.0 0.0.0.255
[r3-Tunnel0/0/0]ospf network-type broadcast 
​
[r4]ospf 1 router-id 4.4.4.4
[r4-ospf-1]area 0
[r4-ospf-1-area-0.0.0.0]network 4.4.4.4 0.0.0.255
[r4-ospf-1-area-0.0.0.0]network 192.168.2.0 0.0.0.255
[r4-Tunnel0/0/0]ospf network-type broadcast 将接口网络类型改为broadcast
​
[r5]ospf 1 router-id 5.5.5.5
[r5-ospf-1]area 0
[r5-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255
[r5-ospf-1-area-0.0.0.0]network 5.5.5.5 0.0.0.255
[r5-Tunnel0/0/0]ospf network-type p2mp
​
[r6]ospf 1 router-id 6.6.6.6
[r6-ospf-1]area 0
[r6-ospf-1-area-0.0.0.0]network 192.168.7.0 0.0.0.255
[r6-ospf-1-area-0.0.0.0]network 6.6.6.6 0.0.0.255
[r6-Tunnel0/0/0]ospf network-type p2mp  将接口网络类型改为p2mp
​
​
​