1.安装必要的支持文件(目前<2022/6/6>通过apt-get即可获得支持的版本)
sudo apt-get install mercurial python-dev python3-dev ruby ruby-dev libx11-dev libxt-dev libgtk2.0-dev libncurses5 ncurses-dev libtool libtool-bin -y
安装依赖文件
过程比较漫长
2.确保python版本大于3.6
Python3 -version
Python -version
//安装python3.6及以上版本
在上述支持文件中
3.确保vim版本不低于8.2(8.2及以上才支持python3)
//检查vim版本
vim --version
//安装在家目录
cd
//检查git工具
git --version
//git获取方式一
git官网下载git
git-scm.comhttps://git-scm.com///git获取方式二
sudo apt-get install git
//克隆vim源代码
git clone https://github.com/vim/vim.git
git克隆工具一般不显示剩余时间
git2.17.1貌似可以显示vim源码克隆进度
这也是一个漫长的过程
//克隆源代码后手动安装vim来配置其支持的拓展包
//先看看配置好的vim所支持的内容
看见python3前面的+号就成功了一小步了
//现在开始配置vim
sudo ./configure --enable-perlinterp --enable-python3interp --enable-rubyinterp --enable-cscope --enable-gui=auto --enable-gtk2-check --with-features=huge --enable-multibyte --with-x --with-compiledby="asd" --with-python3-config-dir=/usr/lib/python3.6/config-3.6m-x86_64-linux-gnu --prefix=/opt/vim82
//如果找不到python3的路径,就使用find命令找一下
find /usr/lib/python* -name python*
找到并复制/usr/lib/python3.6/config-3.6m-x86_64-linux-gnu该目录
替换--with-python3-config-dir=的内容
//可以使用如下命令查看一下各个配置选项的含义
./configure --help
//配置完成后编译即可
make
make install
//把可执行文件连接到/usr/bin目录
sudo ln -s /opt/vim82/bin/vim /usr/bin/vim
//如果命令vim仍不是刚刚编译好的那个,就使用如下命令看看现在的vim命令是连接到哪里的吧
which vim
//如果不是连接到/usr/bin/vim的,就重新把/opt/vim82/bin/vim连接过去,不过需要先删除已有的连接
//最后看看vim的版本信息
vim --version
4.安装vim插件管理工具(vimbundle为例)
//还是安装在家目录下面(强烈建议)
cd
git clone https://github.com/VundleVim/Vundle.vim.git ~/.vim/bundle/Vundle.vim
//查看.vim隐藏文件夹是否克隆成功
ls-a
//配置.vimrc(vim启动时会读取的配置文件),以便加载Vundle
vim ~/.vimrc
//建议直接打开vimbundle的说明,找到3.配置插件,然后复制到.vimrc
vim .vim/bundle/Vundle.vim/README_ZH_CN.md
5.安装ycm补全插件(终于到插件的安装了)
//参考vimbundled的说明中的第4项,在.vimrc中添加如下内容
Bundle 'Valloric/YouCompleteMe'
//vim命令行模式
:VundleInstall
这个过程极度缓慢且没有任何进度显示(都怪ycm太大了)并且容易出现错误
//你也可以使用说明手册中的PluginList而不是Bundle
//如果VundleInstall太慢或者总是丢包也可以直接克隆源代码,当然.vimrc中该加的还是要加
git clone https://github.com/Valloric/YouCompleteMe.git
6.结束了,看看效果
TIPS:如果你的某一个步骤出现了问题,看终端上提示什么就去完善什么就好了
END:个人vimrc(仅供参考)
"set nocompatible " be iMproved
"filetype off " required!
set rtp+=~/.vim/bundle/vundle/
call vundle#rc()
" let Vundle manage Vundle
" required!
Bundle 'gmarik/vundle'
" My Bundles here:
"
" original repos on github
Bundle 'tpope/vim-fugitive'
Bundle 'rstacruz/sparkup', {'rtp': 'vim/'}
Bundle 'Yggdroot/indentLine'
let g:indentLine_char = '┊'
"ndle 'tpope/vim-rails.git'
" vim-scripts repos
Bundle 'L9'
Bundle 'FuzzyFinder'
" non github repos
Bundle 'https://github.com/wincent/command-t.git'
Bundle 'https://github.com/sickill/vim-monokai.git'
Bundle 'https://github.com/soft-aesthetic/soft-era-vim.git'
Bundle 'https://github.com/beikome/cosme.vim.git'
Bundle 'https://github.com/sainnhe/lightline_foobar.vim.git'
Bundle 'https://github.com/rakr/vim-two-firewatch.git'
Bundle 'Auto-Pairs'
Bundle 'python-imports.vim'
Bundle 'CaptureClipboard'
Bundle 'ctrlp-modified.vim'
Bundle 'last_edit_marker.vim'
Bundle 'synmark.vim'
"Bundle 'Python-mode-klen'
Bundle 'SQLComplete.vim'
"Bundle 'Javascript-OmniCompletion-with-YUI-and-j'
"Bundle 'JavaScript-Indent'
"Bundle 'Better-Javascript-Indentation'
"Bundle 'jslint.vim'
Bundle "pangloss/vim-javascript"
Bundle 'Vim-Script-Updater'
Bundle 'ctrlp.vim'
Bundle 'tacahiroy/ctrlp-funky'
Bundle 'jsbeautify'
Bundle 'The-NERD-Commenter'
Bundle 'scrooloose/nerdtree'
Bundle 'vim-airline/vim-airline'
Bundle 'vim-airline/vim-airline-themes'
Bundle 'taglist.vim'
Bundle 'majutsushi/tagbar'
"Bundle 'scrooloose/syntastic'
Bundle 'Valloric/YouCompleteMe'
"django
Bundle 'django_templates.vim'
Bundle 'Django-Projects'
"Bundle 'FredKSchott/CoVim'
"Bundle 'djangojump'
Plugin 'flazz/vim-colorschemes'
" ...
let g:html_indent_inctags = "html,body,head,tbody"
let g:html_indent_script1 = "inc"
let g:html_indent_style1 = "inc"
filetype plugin indent on " required!
"vim base set
set sw=4
set ts=4
set et
set smarttab
set smartindent
set lbr
set fo+=mB
set sm
set selection=inclusive
set wildmenu
set mousemodel=popup
"au FileType php setlocal dict+=~/.vim/dict/php_funclist.dict
au FileType css setlocal dict+=~/.vim/dict/css.dict
au FileType c setlocal dict+=~/.vim/dict/c.dict
au FileType cpp setlocal dict+=~/.vim/dict/cpp.dict
au FileType scale setlocal dict+=~/.vim/dict/scale.dict
au FileType javascript setlocal dict+=~/.vim/dict/javascript.dict
au FileType html setlocal dict+=~/.vim/dict/javascript.dict
au FileType html setlocal dict+=~/.vim/dict/css.dict
"
if 0
"syntastic相关
execute pathogen#infect()
let g:syntastic_python_checkers=['pylint']
let g:syntastic_php_checkers=['php', 'phpcs', 'phpmd']
"golang
"Processing... % (ctrl+c to stop)
let g:fencview_autodetect=0
set rtp+=$GOROOT/misc/vim
endif
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 显示相关
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
syntax on
set cul "高亮光标所在行
set cuc
set shortmess=atI " 启动的时候不显示那个援助乌干达儿童的提示
set go= " 不要图形按钮
"color desert " 设置背景主题
"color ron " 设置背景主题
"color torte " 设置背景主题
"set guifont=Courier_New:h10:cANSI " 设置字体
"autocmd InsertLeave * se nocul " 用浅色高亮当前行
autocmd InsertEnter * se cul " 用浅色高亮当前行
set ruler " 显示标尺
set showcmd " 输入的命令显示出来,看的清楚些
"set whichwrap+=<,>,h,l " 允许backspace和光标键跨越行边界(不建议)
set scrolloff=5 " 光标移动到buffer的顶部和底部时保持n行距离
set statusline=%F%m%r%h%w\ [FORMAT=%{&ff}]\ [TYPE=%Y]\ [POS=%l,%v][%p%%]\ %{strftime(\"%d/%m/%y\ -\ %H:%M\")} "状态行显示的内容
set laststatus=2 " 启动显示状态行(1),总是显示状态行(2)
"set foldenable " 允许折叠
""set foldmethod=manual " 手动折叠
set nocompatible "去掉讨厌的有关vi一致性模式,避免以前版本的一些bug和局限
" 显示中文帮助
if version >= 603
set helplang=cn
set encoding=utf-8
endif
" 自动缩进
set autoindent
set cindent
" Tab键的宽度
set tabstop=4
" 统一缩进为4
set softtabstop=4
set shiftwidth=4
" 使用空格代替制表符
set expandtab
" 在行和段开始处使用制表符
set smarttab
" 显示行号
set number
" 历史记录数
set history=1000
"搜索逐字符高亮
set hlsearch
set incsearch
"语言设置
set langmenu=zh_CN.UTF-8
set helplang=cn
" 总是显示状态行
set cmdheight=2
" 侦测文件类型
filetype on
" 载入文件类型插件
filetype plugin on
" 为特定文件类型载入相关缩进文件
filetype indent on
" 保存全局变量
set viminfo+=!
" 带有如下符号的单词不要被换行分割
set iskeyword+=_,$,@,%,#,-
" 字符间插入的像素行数目
"markdown配置
au BufRead,BufNewFile *.{md,mdown,mkd,mkdn,markdown,mdwn} set filetype=mkd
au BufRead,BufNewFile *.{go} set filetype=go
au BufRead,BufNewFile *.{js} set filetype=javascript
"rkdown to HTML
nmap md :!~/.vim/markdown.pl % > %.html <CR><CR>
nmap fi :!firefox %.html & <CR><CR>
nmap \ \cc
vmap \ \cc
"将tab替换为空格
nmap tt :%s/\t/ /g<CR>
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"""""新文件标题
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"新建.c,.h,.sh,.java文件,自动插入文件头
autocmd BufNewFile *.cpp,*.[ch],*.sh,*.rb,*.java,*.py exec ":call SetTitle()"
""定义函数SetTitle,自动插入文件头
func SetTitle()
"如果文件类型为.sh文件
if &filetype == 'sh'
call setline(1,"\#!/bin/bash")
call append(line("."), "")
elseif &filetype == 'python'
call setline(1,"#!/usr/bin/env python")
call append(line("."),"# coding=utf-8")
call append(line(".")+1, "")
elseif &filetype == 'ruby'
call setline(1,"#!/usr/bin/env ruby")
call append(line("."),"# encoding: utf-8")
call append(line(".")+1, "")
" elseif &filetype == 'mkd'
" call setline(1,"<head><meta charset=\"UTF-8\"></head>")
else
call setline(1, "/*************************************************************************")
call append(line("."), " > File Name: ".expand("%"))
call append(line(".")+1, " > Author: TanyaDuckal")
call append(line(".")+2, " > Mail: TanyaDuckal.MuYL@protonmail.com")
call append(line(".")+3, " > Created Time: ".strftime("%c"))
call append(line(".")+4, " > Desrible:<F7>NerdTree;<F8>TarBar")
call append(line(".")+5, " ************************************************************************/")
"call append(line(".")+6, "")
endif
if expand("%:e") == 'cpp'
call append(line(".")+6, "#include<iostream>")
call append(line(".")+7, "using namespace std;")
call append(line(".")+8, "")
endif
if &filetype == 'c'
call append(line(".")+6, "#include<stdio.h>")
call append(line(".")+7, "#include<string.h>")
call append(line(".")+8, "#include<stdarg.h>")
call append(line(".")+9, "")
call append(line(".")+10, "#define _STR(x) _VAL(x)")
call append(line(".")+11, "#define _VAL(x) #x")
call append(line(".")+12, "#define _CAT(A,B,...) A##B##__VA_ARGS__")
call append(line(".")+13, "#define _Error_Line(X) do{char str[8]={0};strcat(str,_STR(__LINE__));puts(_STR(__LINE__));perror(X);}while(0)")
call append(line(".")+14, "")
endif
if expand("%:e") == 'h'
call append(line(".")+6, "#ifndef _".toupper(expand("%:r"))."_H")
call append(line(".")+7, "#define _".toupper(expand("%:r"))."_H")
"call append(line(".")+8, "#ifdef __cplusplus")
"call append(line(".")+9, "extern "C" {")
"call append(line(".")+10, "#endif")
call append(line(".")+8, "")
"call append(line(".")+12, "#ifdef __cplusplus")
"call append(line(".")+13, "}")
"call append(line(".")+14, "#endif")
call append(line(".")+9, "#endif")
call append(line(".")+10, "")
endif
if &filetype == 'java'
call append(line(".")+6,"public class ".expand("%:r"))
call append(line(".")+7,"")
endif
"新建文件后,自动定位到文件末尾
endfunc
autocmd BufNewFile * normal G
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"键盘命令
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
:nmap <silent> <F9> <ESC>:Tlist<RETURN>
" shift tab pages
map <S-Left> :tabp<CR>
map <S-Right> :tabn<CR>
map! <C-Z> <Esc>zzi
map! <C-O> <C-Y>,
map <C-A> ggVG$"+y
map <Esc><Esc> :w<CR>
map <F12> gg=G
"map <C-w> <C-w>w
map <C-j> <C-W>j
map <C-k> <C-W>k
map <C-h> <C-W>h
map <C-l> <C-W>l
"imap <C-k> <C-y>,
imap <C-t> <C-q><TAB>
"imap <C-j> <ESC>
" 选中状态下 Ctrl+c 复制
"map <C-v> "*pa
imap <C-v> <Esc>"*pa
imap <C-a> <Esc>^
imap <C-e> <Esc>$
vmap <C-c> "+y
"set mouse=v
"set clipboard=unnamed
"去空行
nnoremap <F2> :g/^\s*$/d<CR>
"比较文件
nnoremap <C-F2> :vert diffsplit
"nnoremap <Leader>fu :CtrlPFunky<Cr>
"nnoremap <C-n> :CtrlPFunky<Cr>
"列出当前目录文件
map <F3> :NERDTreeToggle<CR>
imap <F3> <ESC> :NERDTreeToggle<CR>
"打开树状文件目录
map <C-F3> \be
:autocmd BufRead,BufNewFile *.dot map <F5> :w<CR>:!dot -Tjpg -o %<.jpg % && eog %<.jpg <CR><CR> && exec "redr!"
"C,C++ 按F5编译运行
map <F5> :call CompileRunGcc()<CR>
func! CompileRunGcc()
exec "w"
if &filetype == 'c'
exec "!g++ % -o %<"
exec "!time ./%<"
elseif &filetype == 'cpp'
exec "!g++ % -std=c++11 -o %<"
exec "!time ./%<"
elseif &filetype == 'java'
exec "!javac %"
exec "!time java %<"
elseif &filetype == 'sh'
:!time bash %
elseif &filetype == 'python'
exec "!time python2.7 %"
elseif &filetype == 'html'
exec "!firefox % &"
elseif &filetype == 'go'
" exec "!go build %<"
exec "!time go run %"
elseif &filetype == 'mkd'
exec "!~/.vim/markdown.pl % > %.html &"
exec "!firefox %.html &"
endif
endfunc
"C,C++的调试
map <F8> :call Rungdb()<CR>
func! Rungdb()
exec "w"
exec "!g++ % -std=c++11 -g -o %<"
exec "!gdb ./%<"
endfunc
"代码格式优化化
map <F6> :call FormartSrc()<CR><CR>
"定义FormartSrc()
func FormartSrc()
exec "w"
if &filetype == 'c'
exec "!astyle --style=ansi -a --suffix=none %"
elseif &filetype == 'cpp' || &filetype == 'hpp'
exec "r !astyle --style=ansi --one-line=keep-statements -a --suffix=none %> /dev/null 2>&1"
elseif &filetype == 'perl'
exec "!astyle --style=gnu --suffix=none %"
elseif &filetype == 'py'||&filetype == 'python'
exec "r !autopep8 -i --aggressive %"
elseif &filetype == 'java'
exec "!astyle --style=java --suffix=none %"
elseif &filetype == 'jsp'
exec "!astyle --style=gnu --suffix=none %"
elseif &filetype == 'xml'
exec "!astyle --style=gnu --suffix=none %"
else
exec "normal gg=G"
return
endif
exec "e! %"
endfunc
"结束定义FormartSrc
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
""实用设置
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
if has("autocmd")
autocmd BufReadPost *
\ if line("'\"") > 0 && line("'\"") <= line("$") |
\ exe "normal g`\"" |
\ endif
endif
" 设置当文件被改动时自动载入
set autoread
" quickfix模式
autocmd FileType c,cpp map <buffer> <leader><space> :w<cr>:make<cr>
"代码补全
set completeopt=preview,menu
"允许插件
filetype plugin on
"共享剪贴板
set clipboard+=unnamed
"自动保存
set autowrite
"set ruler " 打开状态栏标尺
"set cursorline " 突出显示当前行
set magic " 设置魔术
set guioptions-=T " 隐藏工具栏
set guioptions-=m " 隐藏菜单栏
""set foldcolumn=0
""set foldmethod=indent
""set foldlevel=3
" 不要使用vi的键盘模式,而是vim自己的
set nocompatible
" 去掉输入错误的提示声音
set noeb
" 在处理未保存或只读文件的时候,弹出确认
set confirm
"禁止生成临时文件
set nobackup
set noswapfile
"搜索忽略大小写
set ignorecase
set linespace=0
" 增强模式中的命令行自动完成操作
set wildmenu
" 使回格键(backspace)正常处理indent, eol, start等
set backspace=2
" 允许backspace和光标键跨越行边界
set whichwrap+=<,>,h,l
" 可以在buffer的任何地方使用鼠标(类似office中在工作区双击鼠标定位)
set mouse=a
set selection=exclusive
set selectmode=mouse,key
" 通过使用: commands命令,告诉我们文件的哪一行被改变过
set report=0
" 在被分割的窗口间显示空白,便于阅读
set fillchars=vert:\ ,stl:\ ,stlnc:\
" 高亮显示匹配的括号
set showmatch
" 匹配括号高亮的时间(单位是十分之一秒)
set matchtime=1
" 光标移动到buffer的顶部和底部时保持3行距离
set scrolloff=3
" 为C程序提供自动缩进
"自动补全
"":inoremap ( ()<ESC>i
"":inoremap ) <c-r>=ClosePair(')')<CR>
":inoremap { {<CR>}<ESC>O
":inoremap } <c-r>=ClosePair('}')<CR>
"":inoremap [ []<ESC>i
"":inoremap ] <c-r>=ClosePair(']')<CR>
"":inoremap " ""<ESC>i
"":inoremap ' ''<ESC>i
""function! ClosePair(char)
"" if getline('.')[col('.') - 1] == a:char
"" return "\<Right>"
"" else
"" return a:char
"" endif
""endfunction
filetype plugin indent on
"打开文件类型检测, 加了这句才可以用智能补全
set completeopt=longest,menu
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" CTags的设定
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
let Tlist_Auto_Open = 1 "自动打开taglist
let Tlist_Sort_Type = "name" " 按照名称排序
let Tlist_Use_Right_Window = 1 " 在右侧显示窗口
let Tlist_Compart_Format = 1 " 压缩方式
let Tlist_Exist_OnlyWindow = 1 " 如果只有一个buffer,kill窗口也kill掉buffer
""let Tlist_File_Fold_Auto_Close = 0 " 不要关闭其他文件的tags
""let Tlist_Enable_Fold_Column = 0 " 不要显示折叠树
"let Tlist_Show_One_File=1 "不同时显示多个文件的tag,只显示当前文件的
"设置tags
set tags=tags;
set autochdir
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"其他东东
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"默认打开Taglist
""""""""""""""""""""""""""""""
" Tag list (ctags)
let Tlist_Auto_Open=0
""""""""""""""""""""""""""""""""
let Tlist_Show_One_File = 1 "不同时显示多个文件的tag,只显示当前文件的
let Tlist_File_Fold_Auto_Close = 1
let Tlist_Exit_OnlyWindow = 1 "如果taglist窗口是最后一个窗口,则退出vim
let Tlist_Use_Right_Window = 1 "在右侧窗口中显示taglist窗口
" minibufexpl插件的一般设置
let g:miniBufExplMapWindowNavVim = 1
let g:miniBufExplMapWindowNavArrows = 1
let g:miniBufExplMapCTabSwitchBufs = 1
let g:miniBufExplModSelTarget = 1
let Tlist_Show_One_File=1 "不同时显示多个文件的tag,只显示当前文件的
let Tlist_Ctags_Cmd = '/usr/local/bin/ctags'
nmap tl :Tlist<cr>
"python补全
let g:pydiction_location = '~/.vim/after/complete-dict'
let g:pydiction_menu_height = 20
let Tlist_Ctags_Cmd='/usr/local/bin/ctags'
let g:miniBufExplMapWindowNavVim = 1
let g:miniBufExplMapWindowNavArrows = 1
let g:miniBufExplMapCTabSwitchBufs = 1
let g:miniBufExplModSelTarget = 1
set iskeyword+=.
set termencoding=utf-8
set encoding=utf8
set fileencodings=utf8,ucs-bom,gbk,cp936,gb2312,gb18030
autocmd FileType python set omnifunc=pythoncomplete#Complete
"
"ctrlp设置
"
set wildignore+=*/tmp/*,*.so,*.swp,*.zip,*.pyc,*.png,*.jpg,*.gif " MacOSX/Linux
set wildignore+=*\\tmp\\*,*.swp,*.zip,*.exe,*.pyc,*.png,*.jpg,*.gif " Windows
let g:ctrlp_custom_ignore = '\v[\/]\.(git|hg|svn)$'
let g:ctrlp_custom_ignore = '\v\.(exe|so|dll)$'
let g:ctrlp_extensions = ['funky']
let NERDTreeIgnore=['\.pyc']
"Taglist Set
"NERDTree Set
filetype on
" Start NERDTree and put the cursor back in the other window.
"autocmd VimEnter * NERDTree | wincmd p
" Start NERDTree when Vim is started without file arguments.
autocmd StdinReadPre * let s:std_in=1
autocmd VimEnter * if argc() == 0 && !exists('s:std_in') | NERDTree | endif
" Exit Vim if NERDTree is the only window remaining in the only tab.
autocmd BufEnter * if tabpagenr('$') == 1 && winnr('$') == 1 && exists('b:NERDTree') && b:NERDTree.isTabTree() | quit | endif
" Close the tab if NERDTree is the only window remaining in it.
"autocmd BufEnter * if winnr('$') == 1 && exists('b:NERDTree') && b:NERDTree.isTabTree() | quit | endif
let g:NERDTreeDirArrowExpandable = '+'
let g:NERDTreeDirArrowCollapsible = '-'
let g:NERDTreeWinPos='left'
let g:NERDTreeSize=30
let g:NERDTreeShowLineNumbers=0
let g:NERDTreeHidden=0
nmap <F7> :NERDTreeToggle<CR>
"Tagbar Set
let g:tagbar_ctags_bin = 'ctags' " tagbar 依赖 ctags 插件
let g:tagbar_width = 30 " 设置 tagbar 的宽度为 30 列,默认 40 列
let g:tagbar_autofocus = 1 " 打开 tagbar 时光标在 tagbar 页面内,默认在 vim 打开的文件内
"let g:tagbar_left = 1 " 让 tagbar 在页面左侧显示,默认右边
"let g:tagbar_sort = 0 " 标签不排序,默认排序
" <leader>tb 打开 tagbar 窗口
"map <leader>tb :TagbarToggle<CR>
" <leader>F8 打开 tagbar 窗口
nmap <F8> :TagbarToggle<CR>
"Airline Set
set laststatus=2 "永远显示状态栏
let g:airline_powerline_fonts = 1 " 支持 powerline 字体
let g:airline#extensions#tabline#enabled = 1 "显示窗口tab和buffer
let g:airline_theme='molokai' " murmur配色不错
"let g:airline_theme='murmur'
if !exists('g:airline_symbols')
let g:airline_symbols = {}
endif
let g:airline_left_sep = '▶'
let g:airline_left_alt_sep = '❯'
let g:airline_right_sep = '◀'
let g:airline_right_alt_sep = '❮'
let g:airline_symbols.linenr = '¶'
let g:airline_symbols.branch = '⎇'
"colorthemes Seting
syntax enable
"colorscheme colored_dark
colorscheme soft-era
"colorscheme monokai
"colorscheme 1989
"hi Normal ctermfg=NONE
hi Normal ctermbg=NONE
set ff=unix
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" CSCOPE settings for vim
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
"
" This file contains some boilerplate settings for vim's cscope interface,
" plus some keyboard mappings that I've found useful.
"
" USAGE:
" -- vim 6: Stick this file in your ~/.vim/plugin directory (or in a
" 'plugin' directory in some other directory that is in your
" 'runtimepath'.
"
" -- vim 5: Stick this file somewhere and 'source cscope.vim' it from
" your ~/.vimrc file (or cut and paste it into your .vimrc).
"
" NOTE:
" These key maps use multiple keystrokes (2 or 3 keys). If you find that vim
" keeps timing you out before you can complete them, try changing your timeout
" settings, as explained below.
"
" Happy cscoping,
"
" Jason Duell jduell@alumni.princeton.edu 2002/3/7
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" This tests to see if vim was configured with the '--enable-cscope' option
" when it was compiled. If it wasn't, time to recompile vim...
if has("cscope")
""""""""""""" Standard cscope/vim boilerplate
" use both cscope and ctag for 'ctrl-]', ':ta', and 'vim -t'
set cscopetag
" check cscope for definition of a symbol before checking ctags: set to 1
" if you want the reverse search order.
set csto=0
" add any cscope database in current directory
if filereadable("cscope.out")
cs add cscope.out
" else add the database pointed to by environment variable
elseif $CSCOPE_DB != ""
cs add $CSCOPE_DB
endif
" show msg when any other cscope db added
set cscopeverbose
""""""""""""" My cscope/vim key mappings
"
" The following maps all invoke one of the following cscope search types:
"
" 's' symbol: find all references to the token under cursor
" 'g' global: find global definition(s) of the token under cursor
" 'c' calls: find all calls to the function name under cursor
" 't' text: find all instances of the text under cursor
" 'e' egrep: egrep search for the word under cursor
" 'f' file: open the filename under cursor
" 'i' includes: find files that include the filename under cursor
" 'd' called: find functions that function under cursor calls
"
" Below are three sets of the maps: one set that just jumps to your
" search result, one that splits the existing vim window horizontally and
" diplays your search result in the new window, and one that does the same
" thing, but does a vertical split instead (vim 6 only).
"
" I've used CTRL-\ and CTRL-@ as the starting keys for these maps, as it's
" unlikely that you need their default mappings (CTRL-\'s default use is
" as part of CTRL-\ CTRL-N typemap, which basically just does the same
" thing as hitting 'escape': CTRL-@ doesn't seem to have any default use).
" If you don't like using 'CTRL-@' or CTRL-\, , you can change some or all
" of these maps to use other keys. One likely candidate is 'CTRL-_'
" (which also maps to CTRL-/, which is easier to type). By default it is
" used to switch between Hebrew and English keyboard mode.
"
" All of the maps involving the <cfile> macro use '^<cfile>$': this is so
" that searches over '#include <time.h>" return only references to
" 'time.h', and not 'sys/time.h', etc. (by default cscope will return all
" files that contain 'time.h' as part of their name).
" To do the first type of search, hit 'CTRL-\', followed by one of the
" cscope search types above (s,g,c,t,e,f,i,d). The result of your cscope
" search will be displayed in the current window. You can use CTRL-T to
" go back to where you were before the search.
"
nmap <C-\>s :cs find s <C-R>=expand("<cword>")<CR><CR>
nmap <C-\>g :cs find g <C-R>=expand("<cword>")<CR><CR>
nmap <C-\>c :cs find c <C-R>=expand("<cword>")<CR><CR>
nmap <C-\>t :cs find t <C-R>=expand("<cword>")<CR><CR>
nmap <C-\>e :cs find e <C-R>=expand("<cword>")<CR><CR>
nmap <C-\>f :cs find f <C-R>=expand("<cfile>")<CR><CR>
nmap <C-\>i :cs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
nmap <C-\>d :cs find d <C-R>=expand("<cword>")<CR><CR>
" Using 'CTRL-spacebar' (intepreted as CTRL-@ by vim) then a search type
" makes the vim window split horizontally, with search result displayed in
" the new window.
"
" (Note: earlier versions of vim may not have the :scs command, but it
" can be simulated roughly via:
" nmap <C-@>s <C-W><C-S> :cs find s <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>s :scs find s <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>g :scs find g <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>c :scs find c <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>t :scs find t <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>e :scs find e <C-R>=expand("<cword>")<CR><CR>
nmap <C-@>f :scs find f <C-R>=expand("<cfile>")<CR><CR>
nmap <C-@>i :scs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
nmap <C-@>d :scs find d <C-R>=expand("<cword>")<CR><CR>
" Hitting CTRL-space *twice* before the search type does a vertical
" split instead of a horizontal one (vim 6 and up only)
"
" (Note: you may wish to put a 'set splitright' in your .vimrc
" if you prefer the new window on the right instead of the left
nmap <C-@><C-@>s :vert scs find s <C-R>=expand("<cword>")<CR><CR>
nmap <C-@><C-@>g :vert scs find g <C-R>=expand("<cword>")<CR><CR>
nmap <C-@><C-@>c :vert scs find c <C-R>=expand("<cword>")<CR><CR>
nmap <C-@><C-@>t :vert scs find t <C-R>=expand("<cword>")<CR><CR>
nmap <C-@><C-@>e :vert scs find e <C-R>=expand("<cword>")<CR><CR>
nmap <C-@><C-@>f :vert scs find f <C-R>=expand("<cfile>")<CR><CR>
nmap <C-@><C-@>i :vert scs find i ^<C-R>=expand("<cfile>")<CR>$<CR>
nmap <C-@><C-@>d :vert scs find d <C-R>=expand("<cword>")<CR><CR>
""""""""""""" key map timeouts
"
" By default Vim will only wait 1 second for each keystroke in a mapping.
" You may find that too short with the above typemaps. If so, you should
" either turn off mapping timeouts via 'notimeout'.
"
"set notimeout
"
" Or, you can keep timeouts, by uncommenting the timeoutlen line below,
" with your own personal favorite value (in milliseconds):
"
"set timeoutlen=4000
"
" Either way, since mapping timeout settings by default also set the
" timeouts for multicharacter 'keys codes' (like <F1>), you should also
" set ttimeout and ttimeoutlen: otherwise, you will experience strange
" delays as vim waits for a keystroke after you hit ESC (it will be
" waiting to see if the ESC is actually part of a key code like <F1>).
"
"set ttimeout
"
" personally, I find a tenth of a second to work well for key code
" timeouts. If you experience problems and have a slow terminal or network
" connection, set it higher. If you don't set ttimeoutlen, the value for
" timeoutlent (default: 1000 = 1 second, which is sluggish) is used.
"
"set ttimeoutlen=100
endif
if 1
" add any cscope database in current directory
set nocsverb "// <strong>这一行是新加入的。</strong>
if filereadable("cscope.out")
cs add cscope.out
" else add the database pointed to by environment variable
elseif $CSCOPE_DB != ""
cs add $CSCOPE_DB
endif
" show msg when any other cscope db added
set cscopeverbose
else
if has("cscope")
if filereadable("cscope.out")
cs add cscope.out
cs add cscope.in.out
cs add cscope.po.out
endif
endif
endif
nmap <C-\>g :cs find g <C-R>=expand("<cword>")<CR><CR>