ARM第四天作业

最新推荐文章于 2024-09-23 13:46:02 发布

胡渠洋

最新推荐文章于 2024-09-23 13:46:02 发布

阅读量210

点赞数

文章标签：单片机 c语言嵌入式硬件

本文链接：https://blog.csdn.net/qq_53183630/article/details/127432758

版权

本文详细介绍了如何使用C语言通过GPIO接口控制GPIOE和GPIOF的引脚，实现了LED1、LED2和LED3的初始化、点亮和熄灭功能。通过RCC_AHB4使能和配置GPIO的MODER、OTYPER、OSPEEDR和PUPDR寄存器来操作GPIO。

摘要由CSDN通过智能技术生成

用c语言实现led1~led3点亮

头文件：

#ifndef __LED_H__
#define __LED_H__

typedef struct{
	volatile unsigned int MODER;
	volatile unsigned int OTYPER;
	volatile unsigned int OSPEEDR;
	volatile unsigned int PUPDR;
	volatile unsigned int IDR;
	volatile unsigned int ODR;
}gpio_t;
#define GPIOE ((gpio_t*)0x50006000)
#define GPIOF ((gpio_t*)0x50007000)
#define RCC_AHB4_ENSETR ((volatile unsigned int*)0x50000A28)

//LED1初始化
void led1_init(void);
//LED1点亮
void led1_on(void);
//LED1熄灭
void led1_off(void);

//LED2初始化
void led2_init(void);
//LED2点亮
void led2_on(void);
//LED2熄灭
void led2_off(void);

//LED3初始化
void led3_init(void);
//LED3点亮
void led3_on(void);
//LED3熄灭
void led3_off(void);
#endif

源文件：

#include "led.h"


//LED1初始化
void led1_init(void)
{
	//1.RCC使能
	*RCC_AHB4_ENSETR=*RCC_AHB4_ENSETR | (0x1 << 4);
	//2.设置GPIOE_MODER
	GPIOE->MODER=(GPIOE->MODER & (~(0x3<<20))) | (0x01<<20);
	//3.设置GPIOE_OTYPER
	GPIOE->OTYPER=(GPIOE->OTYPER &(~(0x1<<10)));
	//4.设置OSPEEDR
	GPIOE->OSPEEDR=(GPIOE->OSPEEDR & (~(0x3<<20)));
	//5.设置引脚为禁止上下拉电阻
	GPIOE->PUPDR=(GPIOE->PUPDR & (~(0x3<<20)));
}
//LED1点亮
void led1_on(void)
{
	GPIOE->ODR=(GPIOE->ODR | (0x1<<10));	
}
//LED1熄灭
void led1_off(void)
{
	GPIOE->ODR=(GPIOE->ODR & (~(0x1<<10)));
}

//LED2初始化
void led2_init(void)
{
	//1.RCC使能
	*RCC_AHB4_ENSETR=*RCC_AHB4_ENSETR | (0x1 << 5);
	//2.设置GPIOF_MODER
	GPIOF->MODER=(GPIOF->MODER & (~(0x3<<20))) | (0x01<<20);
	//3.设置GPIOF_OTYPER
	GPIOF->OTYPER=(GPIOF->OTYPER &(~(0x1<<10)));
	//4.设置OSPEEDR
	GPIOF->OSPEEDR=(GPIOF->OSPEEDR & (~(0x3<<20)));
	//5.设置引脚为禁止上下拉电阻
	GPIOF->PUPDR=(GPIOF->PUPDR & (~(0x3<<20)));
}
//LED2点亮
void led2_on(void)
{
	GPIOF->ODR=(GPIOF->ODR | (0x1<<10));	
}
//LED2熄灭
void led2_off(void)
{
	GPIOF->ODR=(GPIOF->ODR & (~(0x1<<10)));
}

//LED3初始化
void led3_init(void)
{
	//1.RCC使能
	*RCC_AHB4_ENSETR=*RCC_AHB4_ENSETR | (0x1 << 4);
	//2.设置GPIOE_MODER
	GPIOE->MODER=(GPIOE->MODER & (~(0x3<<16))) | (0x01<<16);
	//3.设置GPIOE_OTYPER
	GPIOE->OTYPER=(GPIOE->OTYPER &(~(0x1<<8)));
	//4.设置OSPEEDR
	GPIOE->OSPEEDR=(GPIOE->OSPEEDR & (~(0x3<<16)));
	//5.设置引脚为禁止上下拉电阻
	GPIOE->PUPDR=(GPIOE->PUPDR & (~(0x3<<16)));
}
//LED3点亮
void led3_on(void)
{
	GPIOE->ODR=(GPIOE->ODR | (0x1<<8));	
}
//LED3熄灭
void led3_off(void)
{
	GPIOE->ODR=(GPIOE->ODR & (~(0x1<<8)));
}

测试文件

#include "led.h"

extern void printf(const char *fmt, ...);
void delay_ms(int ms)
{
	int i,j;
	for(i = 0; i < ms;i++)
		for (j = 0; j < 1800; j++);
}


int main()
{
	led1_init();
	led2_init();
	led3_init();
	while(1)
	{
		led1_on();
		delay_ms(100);
		led1_off();
		delay_ms(100);

		led2_on();
		delay_ms(100);
		led2_off();
		delay_ms(100);

		led3_on();
		delay_ms(100);
		led3_off();
		delay_ms(100);
	}
	return 0;
}

测试结果: