9月13日 ARM作业

最新推荐文章于 2024-06-22 16:40:32 发布

来日定方长

最新推荐文章于 2024-06-22 16:40:32 发布

阅读量293

点赞数 1

文章标签： arm 单片机嵌入式硬件

本文链接：https://blog.csdn.net/qq_56095954/article/details/126840723

版权

1.用C语言实现LED1/LED2/LED3灯点亮----->需要提交到CSDN，(代码截图，实验现象截图)

.h头文件

#ifndef __GPIO_H__                                  
#define __GPIO_H__                                  
                                                    
//RCC寄存器封装,用宏定义替换                        
#define rcc (*(volatile unsigned int*)0x50000A28)   
                                                    
//GPIO寄存器封装,用结构体封装                       
typedef struct{                                     
    volatile unsigned int moder;                    
    volatile unsigned int otyper;                   
    volatile unsigned int ospeedr;                  
    volatile unsigned int pupdr;                    
    volatile unsigned int idr;                      
    volatile unsigned int odr;                      
}gpio_t;                                            
#define gpioe ((gpio_t *)0x50006000)                
#define gpiof ((gpio_t *)0x50007000)                
//LED1灯初始化                                      
void led1_init();                                   
//LED1灯点亮                                        
void led1_on();                                     
//LED1灯熄灭                                        
void led1_off();                                    
                                                    
//LED2灯初始化                                      
void led2_init();                                   
//LED2灯点亮                                        
void led2_on();                                     
//LED2灯熄灭                                        
void led2_off();                                    
                                                    
                                                    
//LED3灯初始化                                      
void led3_init();                                   
//LED3灯点亮                                        
void led3_on();                                     
//LED3灯熄灭                                        
void led3_off();                                    
                                                    
                                                    
#endif

.c功能文件

#include "gpio.h"                                
//LED1灯初始化                                   
void led1_init()                                 
{                                                
    rcc |= (0x01 << 4);                          
    gpioe->moder &= (~(0x3 << 20));              
    gpioe->moder |= (0x1 << 20);                 
    gpioe->otyper &= (~(0x1 << 10));             
    gpioe->ospeedr &= (~(0x3 << 20));            
    gpioe->pupdr &= (~(0x3 << 20));              
}                                                
//LED1灯点亮                                     
void led1_on()                                   
{                                                
    gpioe->odr |= (0x1 << 10);                   
}                                                
//LED1灯熄灭                                     
void led1_off()                                  
{                                                
    gpioe->odr &= (~(0x1 << 10));                
}                                                
                                                 
//LED2灯初始化                                   
void led2_init()                                 
{                                                
    rcc |= (0x1 << 5);                           
    gpiof->moder &= (~(0x3 << 20));              
    gpiof->moder |= (0x1 << 20);                 
    gpiof->otyper &= (~(0x1 << 10));             
    gpiof->ospeedr &= (~(0x3 << 20));            
    gpiof->pupdr &= (~(0x3 << 20));              
}                                                
//LED2灯点亮                                     
void led2_on()                                   
{                                                
    gpiof->odr |= (0x1 << 10);                   
}                                                
//LED2灯熄灭                                     
void led2_off()                                  
{                                                
    gpiof->odr &= (~(0x1 << 10));                
}                                                
                                                 
                                                 
//LED3灯初始化                                   
void led3_init()                                 
{                                                
    rcc |= (0x1 << 4);                           
    gpioe->moder &= (~(0x3 << 16));              
    gpioe->moder |= (0x1 << 16);                 
    gpioe->otyper &= (~(0x1 << 8));              
    gpioe->ospeedr &= (~(0x3 << 16));            
    gpioe->pupdr &= (~(0x3 << 16));              
}                                                
//LED3灯点亮                                     
void led3_on()                                   
{                                                
    gpioe->odr |= (0x1 << 8);                    
}                                                
//LED3灯熄灭                                     
void led3_off()                                  
{                                                
    gpioe->odr &= (~(0x1 << 8));                 
}

.c主函数

#include "gpio.h"
extern void printf(const char *fmt, ...);
void delay_ms(int ms)
{
    int i,j;
    for(i = 0; i < ms;i++)
        for (j = 0; j < 1800; j++);
}


int main()
{
    while(1)
    {
        led1_init();
        led1_on();
        delay_ms(650);
        //led1_off();

        led2_init();
        led2_on();
        delay_ms(650);
        //led2_off();

        led3_init();
        led3_on();                                     
        delay_ms(650);
        //led3_off();
    }
    return 0;
}