配置过程
syetem-settings-printer
因为实验室是HP的驱动,所以就直接点击第一个,然后就一路往下,就可以了,驱动他也会默认帮你选好的.
问题
ip
我在第一次配置的时候需要填打印机的ip,我是在师兄windows下,查看的,师兄已经配置好了打印机,windows输入ipconfig
然后ipv4对应的ip就是打印机的ip
There was an error during the CUPS operation: ‘client-error-not-possible’.
在fedora下原因是这样:
通过查看 /var/log/cups/error_log日志并查看samba packages 就会发现缺少“samba-client”
我按照这里
sudo apt-get install samba-client
systemctl restart cups.service
执行第一条命令的时候,会出现这个,这是因为可能那个包在ubuntu下是smbclient
,直接按回车就好了
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'smbclient' instead of 'samba-client'
The following additional packages will be installed:
libsmbclient libwbclient0 python-samba samba-common samba-common-bin
samba-libs
Suggested packages:
heimdal-clients
The following NEW packages will be installed:
smbclient
The following packages will be upgraded:
libsmbclient libwbclient0 python-samba samba-common samba-common-bin
samba-libs
6 upgraded, 1 newly installed, 0 to remove and 82 not upgraded.
Need to get 7,207 kB of archives.
After this operation, 1,502 kB of additional disk space will be used.
Do you want to continue? [Y/n]