pythonocc 用BRepOffsetAPI_ThruSections建3D棱台

棱台就是棱锥被一个平面截掉上半部分后的几何实体。可以用下底平面和上底平面来确定一个棱台。BRepOffsetAPI_ThruSections用下底曲线和上底曲线来构建的棱台。BRepOffsetAPI_ThruSections是通过所用的曲线的几何实体。

from OCC.Core.BRepOffsetAPI import  BRepOffsetAPI_ThruSections

from OCC.Core.gp import gp_Pnt

from OCC.Core.BRepBuilderAPI import  BRepBuilderAPI_MakePolygon

def GetTrapezoid3dShape(offset_x, offset_y, bottom_x, bottom_y, top_x, top_y, z0, z1):
    
    aP1 = gp_Pnt(-bottom_x/2 + offset_x, -bottom_y/2 + offset_y, z0)
    aP2 = gp_Pnt(bottom_x/2 + offset_x, -bottom_y/2 + offset_y, z0)
    aP3 = gp_Pnt(bottom_x/2 + offset_x, bottom_y/2 + offset_y, z0)
    aP4 = gp_Pnt(-bottom_x/2 + offset_x, bottom_y/2 + offset_y, z0)
    
    aPolygon_bottom = BRepBuilderAPI_MakePolygon(aP1, aP2, aP3, aP4, True)

    aP1_top = gp_Pnt(-top_x/2 + offset_x, -top_y/2 + offset_y, z1)
    aP2_top = gp_Pnt(top_x/2 + offset_x, -top_y/2 + offset_y, z1)
    aP3_top = gp_Pnt(top_x/2 + offset_x, top_y/2 + offset_y, z1)
    aP4_top = gp_Pnt(-top_x/2 + offset_x, top_y/2 + offset_y, z1)
    
    aPolygon_top = BRepBuilderAPI_MakePolygon(aP1_top, aP2_top, aP3_top, aP4_top, True)
   
    box = BRepOffsetAPI_ThruSections(True, True)
    box.AddWire(aPolygon_bottom.Wire())
    box.AddWire(aPolygon_top.Wire())
    
    return box.Shape()