Ubuntu 10.04双显示器扩展方式,笔记本外接显示器分辨率低增加没有的分辨率。
使用扩展方式,但是外接的显示器没有认出来(未知),分辨率超不过笔记本的1366x768,原本外接显示器是19寸宽屏1440x900,笔记本 1366x768,看了网上很多说要改xorg.conf文件,说起这个文件我就老火,以前的笔记本ati mobility x700显卡,在RedHat enterprise 5,Fedora 5,6,7,8,9.....上都无法图形安装,只能换成文本安装,安装好后,无法图形启动,要改xorg.conf中的驱动为vesa然后去下ati驱 动然后才正常,现在对xorg.conf没胃口了,不想去动它,哪天出毛病了,又要去改来改去,麻烦,Ubuntu老早就没这文件了,何必创建它,何必改 他,写个脚本,每次启动自动调整多好多省事
好了,下面开始
1,
$cvt 1440 900
结果如下
# 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz
Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
Modeline后面的值在下边要用。然后执行
2,
$xrandr
得到显示器名称,我的为 VGA1,笔记本为LVDS1,大家以此类推,不一定都一样
3,
$sudo xrandr --newmode "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync
参数就是cvt结果中Modeline后面的那一堆,根据自己的参数调整。
4,
$xrandr
就可 以看到新加的那个设置了。
然后添加新的mode,执行
5,
$sudo xrandr --addmode VGA1 "1440x900_60.00"
然后设置一下就行了,大家看看xrandr的命令详解,www.linuxidc.com我这就只说我的笔记本在左 1366x768,外接显示器在右1440x900的命令,也就是右侧扩展屏幕
6,
$xrandr --output VGA1 --mode 1440x900_60.00 --right-of LVDS1
打开外接显示器(最高分辨率),设置为右侧扩展屏幕
7,
补充:
xrandr 命令行可以很方便地切换双屏,常用方式如下,其他的可以自己探索:
xrandr --output VGA --same-as LVDS --auto
打开外接显示器(最高分辨率),与笔记本液晶屏幕显示同样内容(克隆)
xrandr --output VGA --same-as LVDS --mode 1024x768
打开外接显示器(分辨率为1024x768),与笔记本液晶屏幕显示同样内容(克隆)
xrandr --output VGA --right-of LVDS --auto
打开外接显示器(最高分辨率),设置为右侧扩展屏幕
xrandr --output VGA --off
关闭外接显示器
xrandr --output VGA --auto --output LVDS --off
打开外接显示器,同时关闭笔记本液晶屏幕(只用外接显示器工作)
xrandr --output VGA --off --output LVDS --auto
关闭外接显示器,同时打开笔记本液晶屏幕 (只用笔记本液晶屏)
(最后两种情况请小心操作,不要误把两个屏幕都关掉了。。。。)
8,写自启动脚本:
随便找个文件,加上执行权限,加入自启动程序列表中,这里不需要加sudo,也不需要sudo 密码,直接就是下面代码
#代码如下:
#!/bin/bash
xrandr --newmode "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync;
xrandr --addmode VGA1 "1440x900_60.00";
xrandr --output LVDS1 --mode 1366x768
xrandr --output VGA1 --mode 1440x900_60.00;
xrandr --output VGA1 --right-of LVDS1;
保存在主目录下命名为display,然后加入到系统--》首选项--》启动应用程序中,添加个启动程序,指向刚才那个文件。
唯一缺点,登录进去之后会有”无法应用原保存的显示器配置“的提示,不用理他啦,不过进去后,脚本马上就运行帮我们调好两个显示的正确参数了,呵呵,比修改xorg.conf简单多了,纯粹大炮打蚊子。
其他参考文章 :
ubuntu不能设置高分辨率问题的解决方法 http://www.jb51.net/os/Ubuntu/85861.html
Ubuntu11.04解决外接显示器分辨率低的问题 http://www.xuebuyuan.com/598788.html 非常好的文章吧! 我还没有试验
实践失败了!
调节外接显器分辨率为 1920x1080_60
第一步 :
hp@linux:~$ cvt 1920 1080
# 1920x1080 59.96 Hz (CVT 2.07M9) hsync: 67.16 kHz; pclk: 173.00 MHz
Modeline "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
第二步 :
hp@linux:~$ xrandr
Screen 0: minimum 320 x 200, current 2646 x 1024, maximum 32767 x 32767
eDP1 connected 1366x768+0+256 (normal left inverted right x axis y axis) 309mm x 173mm
1366x768 60.0*+ 40.0
1360x768 59.8 60.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
DP1 connected primary 1280x1024+1366+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.0 +
1600x900 60.0
1280x1024 75.0 60.0*
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
HDMI1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
第三步 :
hp@linux:~$ sudo xrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
第四步 :
hp@linux:~$ xrandr
Screen 0: minimum 320 x 200, current 2646 x 1024, maximum 32767 x 32767
eDP1 connected 1366x768+0+256 (normal left inverted right x axis y axis) 309mm x 173mm
1366x768 60.0*+ 40.0
1360x768 59.8 60.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
DP1 connected primary 1280x1024+1366+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.0 +
1600x900 60.0
1280x1024 75.0 60.0*
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
HDMI1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
1920x1080_60.00 (0x11b) 173.0MHz
h: width 1920 start 2048 end 2248 total 2576 skew 0 clock 67.2KHz
v: height 1080 start 1083 end 1088 total 1120 clock 60.0Hz
第五步 :
hp@linux:~$ sudo xrandr --addmode DP1 "1920x1080_60.00"
最后一步不可以,失败了
xrandr --output DP1 --mode 1920x1080_60.00 --right-of LVDS1