An Internal Solution Magnitude Limit Was Exceeded
… Check your Environment for inappropriate load values or insufficient supports. See the Troubleshooting section of the Help System for more information.
在大多数例子中这条消息通常出现在模型约束不合理或者相对于模型尺寸,施加载荷的大小过大的情况下。
首先检查应用的边界条件是否正确。在某些情况下,可能需要在没有支撑但能够自我平衡的载荷。为了应对这些情况,如果这个消息出现,考虑调整Weak Spring Stiffness或激活Inertia relief。一般为了防止刚体运动。
热力学求解
对于热力学来说,确认至少设置了一个”散热器“,一个热源和闭合的接触区域。