KEIL 5 STM32f0/f1/f2/f3/f4库文件(pack)

KEIL 5 STM32f0/f1/f2/f3/f4库文件(pack)

STM32F0xx库文件

https://keilpack.azureedge.net/pack/Keil.STM32F0xx_DFP.2.1.0.pack

STM32F1xx库文件

https://keilpack.azureedge.net/pack/Keil.STM32F1xx_DFP.2.3.0.pack

STM32F2xx库文件

https://keilpack.azureedge.net/pack/Keil.STM32F2xx_DFP.2.9.0.pack

STM32F3xx库文件

https://keilpack.azureedge.net/pack/Keil.STM32F3xx_DFP.2.1.0.pack

STM32F4xx库文件

https://keilpack.azureedge.net/pack/Keil.STM32F4xx_DFP.2.15.0.pack

  • 21
    点赞
  • 40
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
Version: 2.15.0 (2020-09-28) Keil.STM32F4xx_DFP.2.15.0.pack Download Updated Pack to STM32Cube_FW_F4 Firmware Package version V1.25.1 using HAL Drivers V1.7.9. STM32CubeMX integration (Version 6.0.1): Added support for Timebase Source TIMx (FrameworkCubeMX_gpdsc.ftl). Removed non-existent include path. CMSIS Flash Algorithm: Corrected STM32F42xxx_43xxx_OPT Algorithm. CMSIS SVD: Updated STM32F42*.svd, STM32F43*.svd files. CMSIS-Driver: I2C: Corrected 2 byte reception in master mode. MCI: Replaced empty delay loops with _NOP(). SPI: Corrected PowerControl function (to return error if Initialize was not called, to abort active transfer if power off was requested). Updated GetDataCount function to give accurate count in DMA mode. Corrected Control function (abort in DMA mode, software controlled slave select in slave mode, TI Frame Format selection, ignore bus speed for slave mode). Corrected Uninitialize function (to power off the peripheral if it is powered). Corrected SPI3_SCK pin configuration. Corrected DMA MemDataAlignment configuration. USART: Corrected DMA MemDataAlignment configuration. USBD_HS/USBH_HS: OTG_HS ULPI clock disabled in low power if internal PHY is used to enable proper operation of OTG_HS port in FS mode during CPU sleep. CAN/EMAC/USBD/USBH: Removed macros already provided by cmsis_compiler.h. Updated Boards Examples: Migrated CubeMX projects to V6.0.1 and updated config files. Changed variant selection to "MDK-Plus" where possible. Updated all USB Host/Device examples with user templates from MDK-Middleware v7.11.1. Terminating app_main thread with osThreadExit() to avoid endless loop Updated MS Windows UBS driver files.
Version: 2.2.0 (2021-07-22) Keil.STM32F3xx_DFP.2.2.0.pack Updated Pack to STM32Cube_FW_F3 Firmware Package version V1.11.2: Updated HAL to version V1.5.5. External interrupts and events (EXTI) HAL Universal serial bus full-speed device interface (USB) LL Added global define USE_HAL_DRIVER and USE_FULL_LL_DRIVER to the component ::Device:STM32Cube Framework:STM32CubeMX. Added global define USE_HAL_DRIVER and USE_FULL_LL_DRIVER to the component ::Device:STM32Cube HAL:COMMON. STM32CubeMX integration: MX_Device_h.ftl: Updated parsing of USART virtual mode. Updated generation of macros: Added handling for '(' and ')' symbols. FrameworkCubeMX_gpdsc.ftl: Added support for Timebase Source TIMx. Board Examples: Terminating app_main thread with osThreadExit() to avoid endless loop. Updated RTX configuration (CMSIS 5.8.0). Updated template based files (MDK-Middleware 7.13.0). Configured MDK projects to use Arm Compiler 6. Changed Assembler option to armclang (Auto Select). Updated all USB Host/Device examples with user templates from MDK-Middleware v7.11.1. FileSystem, USB: Changed variant selection to "MDK-Plus". Updated Graphics examples to use Segger emWin version 5.50. CMSIS Driver: CAN: Corrected SetBitrate function to leave Silent and Loopback mode as they were. Corrected SetMode function to clear Silent and Loopback mode when NORMAL mode is activated. Corrected MessageSend function to only access required data for sending. Corrected abort message send functionality. I2C: Corrected pin configuration: MX_I2Cx_SMBA_GPIO_PuPdOD replaced with MX_I2Cx_yyy_GPIO_PuPdOD. Corrected usage function name USB Device: Corrected transmitted count for non-control IN endpoints. Updated USBD_EndpointConfigure function to check that maximum packet size requested fits into configured FIFO (compile time configured). Removed include of stm32f3xx_hal_pcd.h header.

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

小菜汪的逆袭

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值