GSV6201_GScoolink_Type-c to HDMI2.1扩展坞芯片

General Description

Gscoolink GSV6201 is a high-performance, low-power, USB Type-C Alternate Mode DisplayPort 1.4 to HDMI 2.1 converter. By integrating enhanced microcontroller, GSV6201 has created a cost-effective solution that provides time-to-market advantages. The DisplayPort Receiver supports up to 32.4Gbps (HBR3, 4-lane) and HDMI Transmitter supports up to 48Gbps (FRL, 12G4Lane).

Integrated Power Delivery 3.0 controller handles Type-C CC interface for USB power management and DisplayPort mode entry. The superior architecture of GSV6201 provides

economical smaller footprint solutions using QFN64, targeting applications of Type-C Docking, Type-C dongle and DP to HDMI cable.

DisplayPort Receiver Features

 Compliant with VESA DisplayPort 1.4a

 Compliant with HDCP 2.2/2.3 and HDCP 1.4

 Support HBR3, HBR2, HBR and RBR (8.1/5.4/2.7/1.62 Gbps)

 Flexible 1/2/4 lane Main-Link configuration

 Programmable Adaptive Equalization

 Support Full-Link Training and No-Link Training

 Support High Dynamic Range (HDR) and Dynamic/Static Metadata

 Support Adaptive Sync/FreeSync

 Support Audio Extraction

 Support Horizontal Blanking Expansion up to 4K@120Hz format

 Support Forward Error Correction (FEC)

 Embedded arbitrary EDID and MCCS

 Support Spread Spectrum Clock (SSC)

HDMI Transmitter Features

 Compliant with HDMI 2.1, HDMI 2.0b, HDMI 1.4b

 Compliant with HDCP 2.2/2.3 and HDCP 1.4

 Data rate up to 48Gbps (FRL 12Gbps/4 Lane)

 Programmable Voltage Swing, Slew-Rate and Pre-emphasis

 Support AC-coupling on TMDS

 Support Color Space Converter in HDMI 2.0 mode

 Support HDR (HDR10/HDR10+/Dolby Vision/HLG)

 Support Variable Refresh Rate (VRR)/FreeSync

 Support DSC encoded stream pass-through

 Hardware CEC Engine for Low Level protocol decoding

 5V tolerance on DDC/HPD/CEC pins

USB Type-C Interface Features

 USB Power Delivery 3.0 Compliant controller

 3 Configuration Channels (CC) with built-in Rp/Rd resistors

 Dual Role Power Port (DRP)

 Fast Role Swap

 USB 2.0 full-speed billboard enumeration

Audio Input/Output Features

 I2S and SPDIF Audio Extraction from HDMI Rx

 I2S/SPDIF Audio Insertion to HDMI Tx

 SPDIF/I2S/HBR/DSD/TDM Format Supported for Audio Extraction and Insertion

 SPDIF to I2S Conversion using single TTL bus in Bi-direction

System Features

 Embedded internal MCU

 Optional Internal Flash or External pins of Flash QSPI interface

 External 25MHz Crystal required

 Available Pins for UART/Timer/GPIO

 Temperature Sensor Monitoring Circuit