Hi3518ev300 uboot 启动内核失败：

错误打印如下：

System startup

Uncompress Ok!

U-Boot 2016.11 (Sep 19 2019 - 15:42:22 +0800)hi3518ev300

Relocation Offset is: 03736000
Relocating to 43f36000, new gd at 43e95ef0, sp at 43e95ed0
SPI Nor:  hifmc_ip_ver_check(44): Check Flash Memory Controller v100 ...hifmc_ip_ver_check(50):  Found
hifmc_spi_nor_probe(1615): SPI Nor ID Table Version 1.0
hifmc_spi_nor_probe(1640): SPI Nor(cs 0) ID: 0xc2 0x20 0x18
hifmc_spi_nor_probe(1705): Block:64KB hifmc_spi_nor_probe(1706): Chip:16MB hifmc_spi_nor_probe(1707): Name:"MX25L128XX"
hifmc100_spi_nor_probe(147): SPI Nor total size: 16MB
NAND:  0 MiB
MMC:   
In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
Hit any key to stop autoboot:  0 
device 0 offset 0x100000, size 0x700000

SF: 7340032 bytes @ 0x100000 Read: OK
## Starting application at 0x41000000 ...

最后停在了：## Starting application at 0x41000000 ...

 

解决：

在文档中发现：

 

内核起始地址固定为0x40000000,不能修改，我傻不拉几的写成0x41000000..............新手上路，到处翻车