Fiber Optic Cable VS. Twisted Pair Cable VS. Coaxial Cable

As we all know, cables are the most important component to achieve data connections in every communication system. Most common cable types are fiber optic cable, twisted pair cable and coaxial cable. Many people are confused how to make choices for their networks. This article aims to make comparison among fiber optic cable, twisted pair cable, and coaxial cable, and tell you how to differentiate these three cables.

Fiber Optic Cable VS. Twisted Pair Cable VS. Coaxial Cable


Fiber Optic Cable vs. Twisted Pair Cable

Twisted pair cable is a kind of wiring in which two conductors of a single circuit are twisted together. The twisted cabling de

  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
A fiber optic gyroscope (FOG) is a device that measures angular velocity by detecting changes in the phase of light that is transmitted through a coiled optical fiber. In order to communicate the measurement data from the FOG to a computer or other processing device, a serial communication circuit is typically used. The specific requirements of the serial communication circuit will depend on the particular FOG being used, as well as the requirements of the system in which it is being integrated. However, some general considerations include: 1. Baud rate: The baud rate determines how quickly data can be transmitted between the FOG and the processing device. The baud rate should be selected to ensure that the system can handle the amount of data being transmitted. 2. Data format: The format of the data being transmitted (e.g. ASCII or binary) should be compatible with the processing device. 3. Transmission protocol: The transmission protocol (e.g. RS-232 or RS-485) should be compatible with both the FOG and the processing device. 4. Noise immunity: The circuit should be designed to minimize the impact of noise on the transmitted data, as noise can cause errors in the measurements. 5. Power supply: The circuit should be designed to operate with the appropriate voltage and current levels for the FOG and processing device. 6. Connector type: The connector used to connect the FOG to the processing device should be compatible with both devices and provide a secure and reliable connection. 7. Error detection and correction: The circuit should include measures to detect and correct errors in the transmitted data, such as parity checking or cyclic redundancy checking (CRC). Overall, the serial communication circuit for a fiber optic gyroscope should be designed with a focus on reliability, accuracy, and compatibility with the specific FOG and processing device being used.
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值