Conda 创建环境python3.10.12 并链接上vscode,进行远程的开发python‘项目

要在远程 Ubuntu 服务器上使用 Conda 创建一个特定版本的 Python 环境（例如 Python 3.10.12），并通过 VS Code 进行远程开发，您可以按照以下步骤操作：

步骤 1: 在远程服务器上创建 Conda 环境

1. 打开远程服务器的终端：
   如果您已经在服务器上，直接打开终端。如果您是通过 SSH 连接到服务器的，首先登录到服务器。

2. 创建新的 Conda 环境：
   使用 Conda 创建一个新环境，并指定 Python 版本为 3.10.12。您可以给环境指定一个名字，比如 myenv：

   conda create -n myenv python=3.10.12
   

3. 激活新环境：
   创建环境后，激活该环境：

   conda activate myenv
   

4. 安装所需的 Python 包：
   在您的新环境中安装任何所需的包。例如，安装 NumPy 和 Pandas：

   conda install numpy pandas
   

步骤 2: 设置 VS Code 进行远程开发

1. 确保安装了 Remote - SSH 扩展：
   如果您还没有在 VS Code 上安装 Remote - SSH 扩展，请安装它。

2. 通过 VS Code 连接到远程服务器：
   使用 Remote - SSH 扩展连接到您的远程服务器。

3. 在远程服务器上打开 VS Code 终端：
   连接后，在 VS Code 中打开一个新的终端。这个终端将连接到您的远程服务器。

4. 在 VS Code 中激活 Conda 环境：
   在 VS Code 终端中，激活您刚刚创建的 Conda 环境：

   conda activate myenv
   

5. 配置 VS Code 使用正确的 Python 解释器：

   • 在 VS Code 中，打开命令面板（Ctrl+Shift+P 或 Cmd+Shift+P）。
   • 输入并选择 “Python: Select Interpreter”。
   • 选择刚刚创建的 Conda 环境中的 Python 解释器。

6. 开始编写 Python 代码：
   现在，您可以开始在远程服务器上的 VS Code 中编写 Python 代码了。

注意事项

• 确保您在创建环境时指定了正确的 Python 版本。
• 在通过 VS Code 进行远程开发时，记得保存您的工作，因为网络问题可能导致连接中断。
• 如果您的项目有特定的依赖，可以在激活环境后使用 pip install 或 conda install 安装这些依赖。

(base) sh@sh:~$ conda create -n aienv python=3.10.12
Collecting package metadata (current_repodata.json): done
Solving environment: failed with repodata from current_repodata.json, will retry with next repodata source.
Collecting package metadata (repodata.json): done
Solving environment: done


==> WARNING: A newer version of conda exists. <==
  current version: 4.9.2
  latest version: 23.11.0

Please update conda by running

    $ conda update -n base -c defaults conda



## Package Plan ##

  environment location: /home/sh/miniconda3/envs/aienv

  added / updated specs:
    - python=3.10.12


The following packages will be downloaded:

    package                    |            build
    ---------------------------|-----------------
    _openmp_mutex-5.1          |            1_gnu          21 KB
    bzip2-1.0.8                |       h7b6447c_0          78 KB
    ca-certificates-2023.12.12 |       h06a4308_0         126 KB
    ld_impl_linux-64-2.38      |       h1181459_1         654 KB
    libffi-3.4.4               |       h6a678d5_0         142 KB
    libgcc-ng-11.2.0           |       h1234567_1         5.3 MB
    libgomp-11.2.0             |       h1234567_1         474 KB
    libstdcxx-ng-11.2.0        |       h1234567_1         4.7 MB
    libuuid-1.41.5             |       h5eee18b_0          27 KB
    ncurses-6.4                |       h6a678d5_0         914 KB
    openssl-3.0.12             |       h7f8727e_0         5.2 MB
    pip-23.3.1                 |  py310h06a4308_0         2.7 MB
    python-3.10.12             |       h955ad1f_0        26.8 MB
    readline-8.2               |       h5eee18b_0         357 KB
    setuptools-68.2.2          |  py310h06a4308_0         957 KB
    sqlite-3.41.2              |       h5eee18b_0         1.2 MB
    tk-8.6.12                  |       h1ccaba5_0         3.0 MB
    tzdata-2023c               |       h04d1e81_0         116 KB
    wheel-0.41.2               |  py310h06a4308_0         109 KB
    xz-5.4.5                   |       h5eee18b_0         646 KB
    zlib-1.2.13                |       h5eee18b_0         103 KB
    ------------------------------------------------------------
                                           Total:        53.5 MB

The following NEW packages will be INSTALLED:

  _libgcc_mutex      pkgs/main/linux-64::_libgcc_mutex-0.1-main
  _openmp_mutex      pkgs/main/linux-64::_openmp_mutex-5.1-1_gnu
  bzip2              pkgs/main/linux-64::bzip2-1.0.8-h7b6447c_0
  ca-certificates    pkgs/main/linux-64::ca-certificates-2023.12.12-h06a4308_0
  ld_impl_linux-64   pkgs/main/linux-64::ld_impl_linux-64-2.38-h1181459_1
  libffi             pkgs/main/linux-64::libffi-3.4.4-h6a678d5_0
  libgcc-ng          pkgs/main/linux-64::libgcc-ng-11.2.0-h1234567_1
  libgomp            pkgs/main/linux-64::libgomp-11.2.0-h1234567_1
  libstdcxx-ng       pkgs/main/linux-64::libstdcxx-ng-11.2.0-h1234567_1
  libuuid            pkgs/main/linux-64::libuuid-1.41.5-h5eee18b_0
  ncurses            pkgs/main/linux-64::ncurses-6.4-h6a678d5_0
  openssl            pkgs/main/linux-64::openssl-3.0.12-h7f8727e_0
  pip                pkgs/main/linux-64::pip-23.3.1-py310h06a4308_0
  python             pkgs/main/linux-64::python-3.10.12-h955ad1f_0
  readline           pkgs/main/linux-64::readline-8.2-h5eee18b_0
  setuptools         pkgs/main/linux-64::setuptools-68.2.2-py310h06a4308_0
  sqlite             pkgs/main/linux-64::sqlite-3.41.2-h5eee18b_0
  tk                 pkgs/main/linux-64::tk-8.6.12-h1ccaba5_0
  tzdata             pkgs/main/noarch::tzdata-2023c-h04d1e81_0
  wheel              pkgs/main/linux-64::wheel-0.41.2-py310h06a4308_0
  xz                 pkgs/main/linux-64::xz-5.4.5-h5eee18b_0
  zlib               pkgs/main/linux-64::zlib-1.2.13-h5eee18b_0


Proceed ([y]/n)? y


Downloading and Extracting Packages
libuuid-1.41.5       | 27 KB     | #################################################################################################################################################### | 100% 
pip-23.3.1           | 2.7 MB    | #################################################################################################################################################### | 100% 
ncurses-6.4          | 914 KB    | #################################################################################################################################################### | 100% 
libffi-3.4.4         | 142 KB    | #################################################################################################################################################### | 100% 
ld_impl_linux-64-2.3 | 654 KB    | #################################################################################################################################################### | 100% 
readline-8.2         | 357 KB    | #################################################################################################################################################### | 100% 
tk-8.6.12            | 3.0 MB    | #################################################################################################################################################### | 100% 
tzdata-2023c         | 116 KB    | #################################################################################################################################################### | 100% 
python-3.10.12       | 26.8 MB   | #################################################################################################################################################### | 100% 
setuptools-68.2.2    | 957 KB    | #################################################################################################################################################### | 100% 
ca-certificates-2023 | 126 KB    | #################################################################################################################################################### | 100% 
openssl-3.0.12       | 5.2 MB    | #################################################################################################################################################### | 100% 
libgcc-ng-11.2.0     | 5.3 MB    | #################################################################################################################################################### | 100% 
zlib-1.2.13          | 103 KB    | #################################################################################################################################################### | 100% 
xz-5.4.5             | 646 KB    | #################################################################################################################################################### | 100% 
wheel-0.41.2         | 109 KB    | #################################################################################################################################################### | 100% 
libstdcxx-ng-11.2.0  | 4.7 MB    | #################################################################################################################################################### | 100% 
sqlite-3.41.2        | 1.2 MB    | #################################################################################################################################################### | 100% 
bzip2-1.0.8          | 78 KB     | #################################################################################################################################################### | 100% 
libgomp-11.2.0       | 474 KB    | #################################################################################################################################################### | 100% 
_openmp_mutex-5.1    | 21 KB     | #################################################################################################################################################### | 100% 
Preparing transaction: done
Verifying transaction: done
Executing transaction: done
#
# To activate this environment, use
#
#     $ conda activate aienv
#
# To deactivate an active environment, use
#
#     $ conda deactivate

(base) sh@sh:~$ conda activate aienv
(aienv) sh@sh:~$ 
(aienv) sh@sh:~$ 
(aienv) sh@sh:~/sunyuhua$ cd langchain-chatchat/

(aienv) sh@sh:~/sunyuhua/langchain-chatchat$ pip install -r requirements.txt 
Ignoring python-magic-bin: markers 'sys_platform == "win32"' don't match your environment
Collecting langchain==0.0.344 (from -r requirements.txt (line 3))
  Downloading langchain-0.0.344-py3-none-any.whl.metadata (16 kB)
Collecting langchain-experimental>=0.0.42 (from -r requirements.txt (line 4))
  Downloading langchain_experimental-0.0.47-py3-none-any.whl.metadata (1.9 kB)
Collecting pydantic==1.10.13 (from -r requirements.txt (line 5))
  Downloading pydantic-1.10.13-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (149 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 149.6/149.6 kB 612.1 kB/s eta 0:00:00
Collecting fschat>=0.2.33 (from -r requirements.txt (line 6))
  Downloading fschat-0.2.34-py3-none-any.whl.metadata (20 kB)
Collecting xformers>=0.0.22.post7 (from -r requirements.txt (line 7))
  Downloading xformers-0.0.23.post1-cp310-cp310-manylinux2014_x86_64.whl.metadata (1.0 kB)
Collecting openai>=1.3.6 (from -r requirements.txt (line 8))
  Downloading openai-1.6.1-py3-none-any.whl.metadata (17 kB)
Collecting sentence_transformers (from -r requirements.txt (line 9))
  Downloading sentence-transformers-2.2.2.tar.gz (85 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 86.0/86.0 kB 3.8 MB/s eta 0:00:00
  Preparing metadata (setup.py) ... done
Collecting transformers>=4.35.2 (from -r requirements.txt (line 10))
  Downloading transformers-4.36.2-py3-none-any.whl.metadata (126 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 126.8/126.8 kB 4.0 MB/s eta 0:00:00
Collecting torch==2.1.0 (from -r requirements.txt (line 11))
  Downloading torch-2.1.0-cp310-cp310-manylinux1_x86_64.whl.metadata (25 kB)
Collecting torchvision (from -r requirements.txt (line 12))
  Downloading torchvision-0.16.2-cp310-cp310-manylinux1_x86_64.whl.metadata (6.6 kB)
Collecting torchaudio (from -r requirements.txt (line 13))
  Downloading torchaudio-2.1.2-cp310-cp310-manylinux1_x86_64.whl.metadata (6.4 kB)
Collecting fastapi>=0.104 (from -r requirements.txt (line 14))
  Downloading fastapi-0.108.0-py3-none-any.whl.metadata (24 kB)
Collecting nltk>=3.8.1 (from -r requirements.txt (line 15))
  Downloading nltk-3.8.1-py3-none-any.whl (1.5 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 1.5/1.5 MB 3.8 MB/s eta 0:00:00
Collecting uvicorn>=0.24.0.post1 (from -r requirements.txt (line 16))
  Downloading uvicorn-0.25.0-py3-none-any.whl.metadata (6.4 kB)
Collecting starlette~=0.27.0 (from -r requirements.txt (line 17))
  Downloading starlette-0.27.0-py3-none-any.whl.metadata (5.8 kB)
Collecting unstructured==0.11.0 (from unstructured[all-docs]==0.11.0->-r requirements.txt (line 18))
  Downloading unstructured-0.11.0-py3-none-any.whl.metadata (25 kB)
Collecting SQLAlchemy==2.0.19 (from -r requirements.txt (line 20))
  Downloading SQLAlchemy-2.0.19-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (9.4 kB)
Collecting faiss-cpu (from -r requirements.txt (line 21))
  Downloading faiss_cpu-1.7.4-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl (17.6 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 17.6/17.6 MB 5.3 MB/s eta 0:00:00
Collecting accelerate>=0.24.1 (from -r requirements.txt (line 22))
  Downloading accelerate-0.25.0-py3-none-any.whl.metadata (18 kB)
Collecting spacy>=3.7.2 (from -r requirements.txt (line 23))
  Downloading spacy-3.7.2-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (25 kB)
Collecting PyMuPDF (from -r requirements.txt (line 24))
  Downloading PyMuPDF-1.23.8-cp310-none-manylinux2014_x86_64.whl.metadata (3.4 kB)
Collecting rapidocr_onnxruntime (from -r requirements.txt (line 25))
  Downloading rapidocr_onnxruntime-1.3.9-py3-none-any.whl.metadata (1.3 kB)
Collecting requests>=2.31.0 (from -r requirements.txt (line 26))
  Downloading requests-2.31.0-py3-none-any.whl.metadata (4.6 kB)
Collecting pathlib>=1.0.1 (from -r requirements.txt (line 27))
  Downloading pathlib-1.0.1-py3-none-any.whl (14 kB)
Collecting pytest>=7.4.3 (from -r requirements.txt (line 28))
  Downloading pytest-7.4.3-py3-none-any.whl.metadata (7.9 kB)
Collecting numexpr>=2.8.7 (from -r requirements.txt (line 29))
  Downloading numexpr-2.8.8-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (7.9 kB)
Collecting strsimpy>=0.2.1 (from -r requirements.txt (line 30))
  Downloading strsimpy-0.2.1-py3-none-any.whl (45 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 45.9/45.9 kB 37.3 kB/s eta 0:00:00
Collecting markdownify>=0.11.6 (from -r requirements.txt (line 31))
  Downloading markdownify-0.11.6-py3-none-any.whl (16 kB)
Collecting tiktoken>=0.5.1 (from -r requirements.txt (line 32))
  Downloading tiktoken-0.5.2-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (6.6 kB)
Collecting tqdm>=4.66.1 (from -r requirements.txt (line 33))
  Downloading tqdm-4.66.1-py3-none-any.whl.metadata (57 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 57.6/57.6 kB 5.6 MB/s eta 0:00:00
Collecting websockets (from -r requirements.txt (line 34))
  Downloading websockets-12.0-cp310-cp310-manylinux_2_5_x86_64.manylinux1_x86_64.manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (6.6 kB)
Collecting numpy~=1.24.4 (from -r requirements.txt (line 35))
  Downloading numpy-1.24.4-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (5.6 kB)
Collecting pandas~=2.0.3 (from -r requirements.txt (line 36))
  Downloading pandas-2.0.3-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (18 kB)
Collecting einops>=0.7.0 (from -r requirements.txt (line 37))
  Downloading einops-0.7.0-py3-none-any.whl.metadata (13 kB)
Collecting transformers_stream_generator==0.0.4 (from -r requirements.txt (line 38))
  Downloading transformers-stream-generator-0.0.4.tar.gz (12 kB)
  Preparing metadata (setup.py) ... done
Collecting vllm==0.2.2 (from -r requirements.txt (line 39))
  Downloading vllm-0.2.2-cp310-cp310-manylinux1_x86_64.whl.metadata (6.4 kB)
Collecting arxiv>=2.0.0 (from -r requirements.txt (line 54))
  Downloading arxiv-2.1.0-py3-none-any.whl.metadata (6.1 kB)
Collecting youtube-search>=2.1.2 (from -r requirements.txt (line 55))
  Downloading youtube_search-2.1.2-py3-none-any.whl (3.4 kB)
Collecting duckduckgo-search>=3.9.9 (from -r requirements.txt (line 56))
  Downloading duckduckgo_search-4.1.1-py3-none-any.whl.metadata (19 kB)
Collecting metaphor-python>=0.1.23 (from -r requirements.txt (line 57))
  Downloading metaphor_python-0.1.23-py3-none-any.whl.metadata (636 bytes)
Collecting streamlit>=1.29.0 (from -r requirements.txt (line 61))
  Downloading streamlit-1.29.0-py2.py3-none-any.whl.metadata (8.2 kB)
Collecting streamlit-option-menu>=0.3.6 (from -r requirements.txt (line 62))
  Downloading streamlit_option_menu-0.3.6-py3-none-any.whl.metadata (2.5 kB)
Collecting streamlit-antd-components>=0.2.3 (from -r requirements.txt (line 63))
  Downloading streamlit_antd_components-0.2.5-py3-none-any.whl.metadata (3.3 kB)
Collecting streamlit-chatbox>=1.1.11 (from -r requirements.txt (line 64))
  Downloading streamlit_chatbox-1.1.11-py3-none-any.whl.metadata (6.4 kB)
Collecting streamlit-modal>=0.1.0 (from -r requirements.txt (line 65))
  Downloading streamlit_modal-0.1.0.tar.gz (3.9 kB)
  Preparing metadata (setup.py) ... done
Collecting streamlit-aggrid>=0.3.4.post3 (from -r requirements.txt (line 66))
  Downloading streamlit_aggrid-0.3.4.post3-py3-none-any.whl (3.4 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.4/3.4 MB 4.2 MB/s eta 0:00:00
Collecting httpx>=0.25.2 (from httpx[brotli,http2,socks]>=0.25.2->-r requirements.txt (line 67))
  Downloading httpx-0.26.0-py3-none-any.whl.metadata (7.6 kB)
Collecting watchdog>=3.0.0 (from -r requirements.txt (line 68))
  Downloading watchdog-3.0.0-py3-none-manylinux2014_x86_64.whl (82 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 82.1/82.1 kB 6.3 MB/s eta 0:00:00
Collecting PyYAML>=5.3 (from langchain==0.0.344->-r requirements.txt (line 3))
  Downloading PyYAML-6.0.1-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (2.1 kB)
Collecting aiohttp<4.0.0,>=3.8.3 (from langchain==0.0.344->-r requirements.txt (line 3))
  Downloading aiohttp-3.9.1-cp310-cp310-manylinux_2_17_x86_64.manylinux2014_x86_64.whl.metadata (7.4 kB)
Collecting anyio<4.0 (from langchain==0.0.344->-r requirements.txt (line 3))
  Downloading anyio-3.7.1-py3-none-any.whl.metadata (4.7 kB)
Collecting async-timeout<5.0.0,>=4.0.0 (from langchain==0.0.344->-r requirements.txt (line 3))
  Downloading async_timeout-4.0.3-py3-none-any.whl.metadata (4.2 kB)
Collecting dataclasses-json<0.7,>=0.5.7 (from langchain==0.0.344->-r requirements.txt (line 3))
  Downloading dataclasses_json-0.6.3-py3-none-any.whl.metadata (25 kB)
Collecting jsonpatch<2.0,>=1.33 (from langchain==0.0.344->-r requirements.txt (line 3))
  Downloading jsonpatch-1.33-py2.py3-none-any.whl.metadata (3.0 kB)
Collecting langchain-core<0.1,>=0.0.8 (from langchain==0.0.344->-r requirements.txt (line 3))
  Downloading langchain_core-0.0.13-py3-none-any.whl.metadata (978 bytes)
Collecting langsmith<0.1.0,>=0.0.63 (from langchain==0.0.344->-r requirements.txt (line 3))
  Downloading langsmith-0.0.75-py3-none-any.whl.metadata (10 kB)
Collecting tenacity<9.0.0,>=8.1.0 (from langchain==0.0.344->-r requirements.txt (line 3))
  Downloading tenacity-8.2.3-py3-none-any.whl.metadata (1.0 kB)
Collecting typing-extensions>=4.2.0 (from pydantic==1.10.13->-r requirements.txt (line 5))
  Downloading typing_extensions-4.9.0-py3-none-any.whl.metadata (3.0 kB)
Collecting filelock (from torch==2.1.0->-r requirements.txt (line 11))
  Downloading filelock-3.13.1-py3-none-any.whl.metadata (2.8 kB)
Collecting sympy (from torch==2.1.0->-r requirements.txt (line 11))
  Downloading sympy-1.12-py3-none-any.whl (5.7 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 5.7/5.7 MB 3.0 MB/s eta 0:00:00
Collecting networkx (from torch==2.1.0->-r requirements.txt (line 11))
  Downloading networkx-3.2.1-py3-none-any.whl.metadata (5.2 kB)
Collecting jinja2 (from torch==2.1.0->-r requirements.txt (line 11))
  Downloading Jinja2-3.1.2-py3-none-any.whl (133 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 133.1/133.1 kB 3.0 MB/s eta 0:00:00
Collecting fsspec (from torch==2.1.0->-r requirements.txt (line 11))
  Downloading fsspec-2023.12.2-py3-none-any.whl.metadata (6.8 kB)
Collecting nvidia-cuda-nvrtc-cu12==12.1.105 (from torch==2.1.0->-r requirements.txt (line 11))
  Downloading nvidia_cuda_nvrtc_cu12-12.1.105-py3-none-manylinux1_x86_64.whl (23.7 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 23.7/23.7 MB 2.9 MB/s eta 0:00:00
Collecting nvidia-cuda-runtime-cu12==12.1.105 (from torch==2.1.0->-r requirements.txt (line 11))
  Downloading nvidia_cuda_runtime_cu12-12.1.105-py3-none-manylinux1_x86_64.whl (823 kB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 823.6/823.6 kB 3.3 MB/s eta 0:00:00
Collecting nvidia-cuda-cupti-cu12==12.1.105 (from torch==2.1.0->-r requirements.txt (line 11))
  Downloading nvidia_cuda_cupti_cu12-12.1.105-py3-none-manylinux1_x86_64.whl (14.1 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 14.1/14.1 MB 4.2 MB/s eta 0:00:00
Collecting nvidia-cudnn-cu12==8.9.2.26 (from torch==2.1.0->-r requirements.txt (line 11))
  Downloading nvidia_cudnn_cu12-8.9.2.26-py3-none-manylinux1_x86_64.whl.metadata (1.6 kB)
Collecting nvidia-cublas-cu12==12.1.3.1 (from torch==2.1.0->-r requirements.txt (line 11))
  Downloading nvidia_cublas_cu12-12.1.3.1-py3-none-manylinux1_x86_64.whl (410.6 MB)
     ━━━━━━━━━━━━━━━━━━━━━━━━╺━━━━━━━━━━━━━━━ 249.1/410.6 MB 2.3 MB/s eta 0:01:10