模拟NAND FLASH 读写BCH ECC校验

一、模拟NAND FLASH 读写BCH ECC校验

将内核源码里的bch校验程序分离出来,从而可以手动修改原始数据和bch校验码,达到模拟出错纠正过程。

源码 bch.c、bch.h、types.h (源码在下边)

编译程序

gcc bch.c

运行结果

512个字节纠正4bit

./a.out
bch
bch校验不仅对原始数据有校验功能,对生成的bch码也有校验。
比如512个字节纠正4bit,只要 512字节 + 生成的bch校验码 反转位数不超过4bit,数据就可以纠正过来

模拟部分代码

模拟部分代码如下

void display_info(unsigned char *buf, unsigned int cont)
{
  int i,j=cont;
  for(i=0;i<j;i++)
  {
      if((i%10) == 0)
        printf("\n\r\t");
      printf(" 0x%02x",buf[i]);
  }
  printf("\n\r");
}

#if 0
#define BCH 40		//1024字节纠正40bit
#define ECCSIZE 1024
#define ECCBYTES (BCH*14+7)/8   //1024*8 < 2^m - 1
#else
#define BCH 4  		//512字节纠正4bit
#define ECCSIZE 512
#define ECCBYTES (BCH*13+7)/8   //1024*8 < 2^m - 1
#endif


int main()
{
  int i;
  int count;
	unsigned int m, t;
  unsigned int *errloc; 
  unsigned char code[ECCBYTES];
  unsigned char code1[ECCBYTES];
	struct bch_control *bch = NULL;

  unsigned char buf[ECCSIZE];
  unsigned char buf1[ECCSIZE];
	
  memset(buf, 0, ECCSIZE);
  memset(buf1, 0, ECCSIZE);
	
  m = fls(1+8*ECCSIZE);
  t = (ECCBYTES*8)/m;

  printf("bch ecc: eccsize=%d eccbytes=%d m=%d t=%d \n\r",ECCSIZE,ECCBYTES,m,t);

  bch = init_bch(m,t,0);

  for(i=0;i<BCH;i++)
  {
    buf[i] = i;
    buf1[i] = i;
  }
  //strcpy(buf1, buf);

  printf("buf_old:");
  display_info(buf,BCH+5);

  memset(code, 0, ECCBYTES);
  encode_bch(bch, buf, ECCSIZE, code);
  printf("bch_ecc:");
  display_info(code,ECCBYTES);

#if 1					//修改原始数据
  //for(i=BCH;i<BCH+5;i++)
  for(i=0;i<BCH;i++)		//原始数据前BCH个字节,每个字节最低位反转
  {
      if(buf[i]&0x01)
        buf[i] &=0xfe;
      else
        buf[i] |= 0x01;

  //  buf[i]=0xff;
  }
  printf("buf_cha:");
  display_info(buf,BCH+5);
#endif

#if 0					//修改bch验证码
  //for(i=BCH;i<BCH+5;i++)
  for(i=0;i<BCH;i++)		//bch码前BCH个字节,每个字节最低位反转
  {
    if(code[i]&0x01)
      code[i] &= 0xfe;
    else
      code[i] |= 0x01;
   // code[i] = 0x00;
  }
  printf("bch_ecc:");
  display_info(code,ECCBYTES);
#endif

  memset(code1, 0, ECCBYTES);
  encode_bch(bch, buf, ECCSIZE, code1);

  errloc = malloc(4*sizeof(*errloc));
  count = decode_bch(bch, NULL, ECCSIZE, code, code1, NULL,errloc);
  
  printf("conut: %d\n\r",count);

  if (count > 0)
  {
    printf("errloc:");
    for(i=0;i<count;i++)
    {
      if((i%10) == 0)
        printf("\n\r\t");
      printf(" 0x%04x",errloc[i]);
    }
    printf("\n\r");

    for(i=0; i<count; i++)  
    {
      if(errloc[i] < ECCSIZE*8)
            buf[errloc[i] >> 3] ^= (1<< (errloc[i] & 7));		//纠错过程
    }
  }
  
  printf("buf_err:\n\r");
  for(i=0;i<ECCSIZE;i++)
  {
      if(buf1[i] != buf[i])		//判断数据是否有纠正成功
        printf("\t buf[%d]=0x%x err data is 0x%x \n\r",i,buf1[i],buf[i]);
  }
  
//  free_bch(bch);

  return 0;
}

二、测试完整源码

1、bch.c

/*
 * Generic binary BCH encoding/decoding library
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published by
 * the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc., 51
 * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Copyright © 2011 Parrot S.A.
 *
 * Author: Ivan Djelic <ivan.djelic@parrot.com>
 *
 * Description:
 *
 * This library provides runtime configurable encoding/decoding of binary
 * Bose-Chaudhuri-Hocquenghem (BCH) codes.
 *
 * Call init_bch to get a pointer to a newly allocated bch_control structure for
 * the given m (Galois field order), t (error correction capability) and
 * (optional) primitive polynomial parameters.
 *
 * Call encode_bch to compute and store ecc parity bytes to a given buffer.
 * Call decode_bch to detect and locate errors in received data.
 *
 * On systems supporting hw BCH features, intermediate results may be provided
 * to decode_bch in order to skip certain steps. See decode_bch() documentation
 * for details.
 *
 * Option CONFIG_BCH_CONST_PARAMS can be used to force fixed values of
 * parameters m and t; thus allowing extra compiler optimizations and providing
 * better (up to 2x) encoding performance. Using this option makes sense when
 * (m,t) are fixed and known in advance, e.g. when using BCH error correction
 * on a particular NAND flash device.
 *
 * Algorithmic details:
 *
 * Encoding is performed by processing 32 input bits in parallel, using 4
 * remainder lookup tables.
 *
 * The final stage of decoding involves the following internal steps:
 * a. Syndrome computation
 * b. Error locator polynomial computation using Berlekamp-Massey algorithm
 * c. Error locator root finding (by far the most expensive step)
 *
 * In this implementation, step c is not performed using the usual Chien search.
 * Instead, an alternative approach described in [1] is used. It consists in
 * factoring the error locator polynomial using the Berlekamp Trace algorithm
 * (BTA) down to a certain degree (4), after which ad hoc low-degree polynomial
 * solving techniques [2] are used. The resulting algorithm, called BTZ, yields
 * much better performance than Chien search for usual (m,t) values (typically
 * m >= 13, t < 32, see [1]).
 *
 * [1] B. Biswas, V. Herbert. Efficient root finding of polynomials over fields
 * of characteristic 2, in: Western European Workshop on Research in Cryptology
 * - WEWoRC 2009, Graz, Austria, LNCS, Springer, July 2009, to appear.
 * [2] [Zin96] V.A. Zinoviev. On the solution of equations of degree 10 over
 * finite fields GF(2^q). In Rapport de recherche INRIA no 2829, 1996.
 */
#if 0
#include <linux/kernel.h>
#include <linux/errno.h>
//#include <linux/init.h>
//#include <linux/module.h>
//#include <linux/slab.h>
#include <linux/bitops.h>
#include <byteorder.h>
#include <linux/bch.h>
#include <include/stdio.h>
#include <sys/errno.h>
#include <endian.h>
#include <linux/mtd/errno.h>
#include <linux/compat.h>
#endif

#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include "bch.h"


static inline int fls(int x)
{
	int r = 32;

	if (!x)
		return 0;
	if (!(x & 0xffff0000u)) {
		x <<= 16;
		r -= 16;
	}
	if (!(x & 0xff000000u)) {
		x <<= 8;
		r -= 8;
	}
	if (!(x & 0xf0000000u)) {
		x <<= 4;
		r -= 4;
	}
	if (!(x & 0xc0000000u)) {
		x <<= 2;
		r -= 2;
	}
	if (!(x & 0x80000000u)) {
		x <<= 1;
		r -= 1;
	}
	return r;
}


#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))

#if defined(CONFIG_BCH_CONST_PARAMS)
#define GF_M(_p)               (CONFIG_BCH_CONST_M)
#define GF_T(_p)               (CONFIG_BCH_CONST_T)
#define GF_N(_p)               ((1 << (CONFIG_BCH_CONST_M))-1)
#else
#define GF_M(_p)               ((_p)->m)
#define GF_T(_p)               ((_p)->t)
#define GF_N(_p)               ((_p)->n)
#endif

#define BCH_ECC_WORDS(_p)      DIV_ROUND_UP(GF_M(_p)*GF_T(_p), 32)
#define BCH_ECC_BYTES(_p)      DIV_ROUND_UP(GF_M(_p)*GF_T(_p), 8)

#ifndef dbg
#define dbg(_fmt, args...)     do {} while (0)
#endif

/*
 * represent a polynomial over GF(2^m)
 */
struct gf_poly {
	unsigned int deg;    /* polynomial degree */
	unsigned int c[0];   /* polynomial terms */
};

/* given its degree, compute a polynomial size in bytes */
#define GF_POLY_SZ(_d) (sizeof(struct gf_poly)+((_d)+1)*sizeof(unsigned int))

/* polynomial of degree 1 */
struct gf_poly_deg1 {
	struct gf_poly poly;
	unsigned int   c[2];
};

/*
 * same as encode_bch(), but process input data one byte at a time
 */
static void encode_bch_unaligned(struct bch_control *bch,
				 const unsigned char *data, unsigned int len,
				 uint32_t *ecc)
{
	int i;
	const uint32_t *p;
	const int l = BCH_ECC_WORDS(bch)-1;

	while (len--) {
		p = bch->mod8_tab + (l+1)*(((ecc[0] >> 24)^(*data++)) & 0xff);

		for (i = 0; i < l; i++)
			ecc[i] = ((ecc[i] << 8)|(ecc[i+1] >> 24))^(*p++);

		ecc[l] = (ecc[l] << 8)^(*p);
	}
}

/*
 * convert ecc bytes to aligned, zero-padded 32-bit ecc words
 */
static void load_ecc8(struct bch_control *bch, uint32_t *dst,
		      const uint8_t *src)
{
	uint8_t pad[4] = {0, 0, 0, 0};
	unsigned int i, nwords = BCH_ECC_WORDS(bch)-1;

	for (i = 0; i < nwords; i++, src += 4)
		dst[i] = (src[0] << 24)|(src[1] << 16)|(src[2] << 8)|src[3];

	memcpy(pad, src, BCH_ECC_BYTES(bch)-4*nwords);
	dst[nwords] = (pad[0] << 24)|(pad[1] << 16)|(pad[2] << 8)|pad[3];
}

/*
 * convert 32-bit ecc words to ecc bytes
 */
static void store_ecc8(struct bch_control *bch, uint8_t *dst,
		       const uint32_t *src)
{
	uint8_t pad[4];
	unsigned int i, nwords = BCH_ECC_WORDS(bch)-1;

	for (i = 0; i < nwords; i++) {
		*dst++ = (src[i] >> 24);
		*dst++ = (src[i] >> 16) & 0xff;
		*dst++ = (src[i] >>  8) & 0xff;
		*dst++ = (src[i] >>  0) & 0xff;
	}
	pad[0] = (src[nwords] >> 24);
	pad[1] = (src[nwords] >> 16) & 0xff;
	pad[2] = (src[nwords] >>  8) & 0xff;
	pad[3] = (src[nwords] >>  0) & 0xff;
	memcpy(dst, pad, BCH_ECC_BYTES(bch)-4*nwords);
}

/**
 * encode_bch - calculate BCH ecc parity of data
 * @bch:   BCH control structure
 * @data:  data to encode
 * @len:   data length in bytes
 * @ecc:   ecc parity data, must be initialized by caller
 *
 * The @ecc parity array is used both as input and output parameter, in order to
 * allow incremental computations. It should be of the size indicated by member
 * @ecc_bytes of @bch, and should be initialized to 0 before the first call.
 *
 * The exact number of computed ecc parity bits is given by member @ecc_bits of
 * @bch; it may be less than m*t for large values of t.
 */
#if 0
static __inline__  ___arch__swab32(uint32_t x)
{
	__asm__(
	"	wsbh	%0, %1			\n"
	"	rotr	%0, %0, 16		\n"
	: "=r" (x)
	: "r" (x));

	return x;
}
#define cpu_to_be32(x) ___arch__swab32(x)
#else
#define cpu_to_be32(x)  x
#endif

void encode_bch(struct bch_control *bch, const uint8_t *data,
		unsigned int len, uint8_t *ecc)
{
	const unsigned int l = BCH_ECC_WORDS(bch)-1;
	unsigned int i, mlen;
	unsigned long m;
	uint32_t w, r[l+1];
	const uint32_t * const tab0 = bch->mod8_tab;
	const uint32_t * const tab1 = tab0 + 256*(l+1);
	const uint32_t * const tab2 = tab1 + 256*(l+1);
	const uint32_t * const tab3 = tab2 + 256*(l+1);
	const uint32_t *pdata, *p0, *p1, *p2, *p3;

	if (ecc) {
		/* load ecc parity bytes into internal 32-bit buffer */
		load_ecc8(bch, bch->ecc_buf, ecc);
	} else {
		memset(bch->ecc_buf, 0, sizeof(r));
	}
  

	/* process first unaligned data bytes */
	m = ((unsigned long)data) & 3;
	if (m) {
		mlen = (len < (4-m)) ? len : 4-m;
		encode_bch_unaligned(bch, data, mlen, bch->ecc_buf);
		data += mlen;
		len  -= mlen;
	}

	/* process 32-bit aligned data words */
	pdata = (uint32_t *)data;
	mlen  = len/4;
	data += 4*mlen;
	len  -= 4*mlen;
	memcpy(r, bch->ecc_buf, sizeof(r));
  
	/*
	 * split each 32-bit word into 4 polynomials of weight 8 as follows:
	 *
	 * 31 ...24  23 ...16  15 ... 8  7 ... 0
	 * xxxxxxxx  yyyyyyyy  zzzzzzzz  tttttttt
	 *                               tttttttt  mod g = r0 (precomputed)
	 *                     zzzzzzzz  00000000  mod g = r1 (precomputed)
	 *           yyyyyyyy  00000000  00000000  mod g = r2 (precomputed)
	 * xxxxxxxx  00000000  00000000  00000000  mod g = r3 (precomputed)
	 * xxxxxxxx  yyyyyyyy  zzzzzzzz  tttttttt  mod g = r0^r1^r2^r3
	 */
  
	while (mlen--) {
		/* input data is read in big-endian format */
		w = r[0]^cpu_to_be32(*pdata++);

		p0 = tab0 + (l+1)*((w >>  0) & 0xff);
		p1 = tab1 + (l+1)*((w >>  8) & 0xff);
		p2 = tab2 + (l+1)*((w >> 16) & 0xff);
		p3 = tab3 + (l+1)*((w >> 24) & 0xff);

		for (i = 0; i < l; i++)
			r[i] = r[i+1]^p0[i]^p1[i]^p2[i]^p3[i];
			
		r[l] = p0[l]^p1[l]^p2[l]^p3[l];

	}
	memcpy(bch->ecc_buf, r, sizeof(r));

  
	/* process last unaligned bytes */
	if (len)
		encode_bch_unaligned(bch, data, len, bch->ecc_buf);

	/* store ecc parity bytes into original parity buffer */
	if (ecc)
		store_ecc8(bch, ecc, bch->ecc_buf);
}
//EXPORT_SYMBOL_GPL(encode_bch);

static inline int modulo(struct bch_control *bch, unsigned int v)
{
	const unsigned int n = GF_N(bch);
	while (v >= n) {
		v -= n;
		v = (v & n) + (v >> GF_M(bch));
	}
	return v;
}

/*
 * shorter and faster modulo function, only works when v < 2N.
 */
static inline int mod_s(struct bch_control *bch, unsigned int v)
{
	const unsigned int n = GF_N(bch);
	return (v < n) ? v : v-n;
}

static inline int deg(unsigned int poly)
{
	/* polynomial degree is the most-significant bit index */
	return fls(poly)-1;
}

static inline int parity(unsigned int x)
{
	/*
	 * public domain code snippet, lifted from
	 * http://www-graphics.stanford.edu/~seander/bithacks.html
	 */
	x ^= x >> 1;
	x ^= x >> 2;
	x = (x & 0x11111111U) * 0x11111111U;
	return (x >> 28) & 1;
}

/* Galois field basic operations: multiply, divide, inverse, etc. */

static inline unsigned int gf_mul(struct bch_control *bch, unsigned int a,
				  unsigned int b)
{
	return (a && b) ? bch->a_pow_tab[mod_s(bch, bch->a_log_tab[a]+
					       bch->a_log_tab[b])] : 0;
}

static inline unsigned int gf_sqr(struct bch_control *bch, unsigned int a)
{
	return a ? bch->a_pow_tab[mod_s(bch, 2*bch->a_log_tab[a])] : 0;
}

static inline unsigned int gf_div(struct bch_control *bch, unsigned int a,
				  unsigned int b)
{
	return a ? bch->a_pow_tab[mod_s(bch, bch->a_log_tab[a]+
					GF_N(bch)-bch->a_log_tab[b])] : 0;
}

static inline unsigned int gf_inv(struct bch_control *bch, unsigned int a)
{
	return bch->a_pow_tab[GF_N(bch)-bch->a_log_tab[a]];
}

static inline unsigned int a_pow(struct bch_control *bch, int i)
{
	return bch->a_pow_tab[modulo(bch, i)];
}

static inline int a_log(struct bch_control *bch, unsigned int x)
{
	return bch->a_log_tab[x];
}

static inline int a_ilog(struct bch_control *bch, unsigned int x)
{
	return mod_s(bch, GF_N(bch)-bch->a_log_tab[x]);
}

/*
 * compute 2t syndromes of ecc polynomial, i.e. ecc(a^j) for j=1..2t
 */
static void compute_syndromes(struct bch_control *bch, uint32_t *ecc,
			      unsigned int *syn)
{
	int i, j, s;
	unsigned int m;
	uint32_t poly;
	const int t = GF_T(bch);

	s = bch->ecc_bits;

	/* make sure extra bits in last ecc word are cleared */
	m = ((unsigned int)s) & 31;
	if (m)
		ecc[s/32] &= ~((1u << (32-m))-1);
	memset(syn, 0, 2*t*sizeof(*syn));

	/* compute v(a^j) for j=1 .. 2t-1 */
	do {
		poly = *ecc++;
		s -= 32;
		while (poly) {
			i = deg(poly);
			for (j = 0; j < 2*t; j += 2)
				syn[j] ^= a_pow(bch, (j+1)*(i+s));

			poly ^= (1 << i);
		}
	} while (s > 0);

	/* v(a^(2j)) = v(a^j)^2 */
	for (j = 0; j < t; j++)
		syn[2*j+1] = gf_sqr(bch, syn[j]);
}

static void gf_poly_copy(struct gf_poly *dst, struct gf_poly *src)
{
	memcpy(dst, src, GF_POLY_SZ(src->deg));
}

static int compute_error_locator_polynomial(struct bch_control *bch,
					    const unsigned int *syn)
{
	const unsigned int t = GF_T(bch);
	const unsigned int n = GF_N(bch);
	unsigned int i, j, tmp, l, pd = 1, d = syn[0];
	struct gf_poly *elp = bch->elp;
	struct gf_poly *pelp = bch->poly_2t[0];
	struct gf_poly *elp_copy = bch->poly_2t[1];
	int k, pp = -1;

	memset(pelp, 0, GF_POLY_SZ(2*t));
	memset(elp, 0, GF_POLY_SZ(2*t));

	pelp->deg = 0;
	pelp->c[0] = 1;
	elp->deg = 0;
	elp->c[0] = 1;

	/* use simplified binary Berlekamp-Massey algorithm */
	for (i = 0; (i < t) && (elp->deg <= t); i++) {
		if (d) {
			k = 2*i-pp;
			gf_poly_copy(elp_copy, elp);
			/* e[i+1](X) = e[i](X)+di*dp^-1*X^2(i-p)*e[p](X) */
			tmp = a_log(bch, d)+n-a_log(bch, pd);
			for (j = 0; j <= pelp->deg; j++) {
				if (pelp->c[j]) {
					l = a_log(bch, pelp->c[j]);
					elp->c[j+k] ^= a_pow(bch, tmp+l);
				}
			}
			/* compute l[i+1] = max(l[i]->c[l[p]+2*(i-p]) */
			tmp = pelp->deg+k;
			if (tmp > elp->deg) {
				elp->deg = tmp;
				gf_poly_copy(pelp, elp_copy);
				pd = d;
				pp = 2*i;
			}
		}
		/* di+1 = S(2i+3)+elp[i+1].1*S(2i+2)+...+elp[i+1].lS(2i+3-l) */
		if (i < t-1) {
			d = syn[2*i+2];
			for (j = 1; j <= elp->deg; j++)
				d ^= gf_mul(bch, elp->c[j], syn[2*i+2-j]);
		}
	}
	dbg("elp=%s\n", gf_poly_str(elp));
	return (elp->deg > t) ? -1 : (int)elp->deg;
}

/*
 * solve a m x m linear system in GF(2) with an expected number of solutions,
 * and return the number of found solutions
 */
static int solve_linear_system(struct bch_control *bch, unsigned int *rows,
			       unsigned int *sol, int nsol)
{
	const int m = GF_M(bch);
	unsigned int tmp, mask;
	int rem, c, r, p, k, param[m];

	k = 0;
	mask = 1 << m;

	/* Gaussian elimination */
	for (c = 0; c < m; c++) {
		rem = 0;
		p = c-k;
		/* find suitable row for elimination */
		for (r = p; r < m; r++) {
			if (rows[r] & mask) {
				if (r != p) {
					tmp = rows[r];
					rows[r] = rows[p];
					rows[p] = tmp;
				}
				rem = r+1;
				break;
			}
		}
		if (rem) {
			/* perform elimination on remaining rows */
			tmp = rows[p];
			for (r = rem; r < m; r++) {
				if (rows[r] & mask)
					rows[r] ^= tmp;
			}
		} else {
			/* elimination not needed, store defective row index */
			param[k++] = c;
		}
		mask >>= 1;
	}
	/* rewrite system, inserting fake parameter rows */
	if (k > 0) {
		p = k;
		for (r = m-1; r >= 0; r--) {
			if ((r > m-1-k) && rows[r])
				/* system has no solution */
				return 0;

			rows[r] = (p && (r == param[p-1])) ?
				p--, 1u << (m-r) : rows[r-p];
		}
	}

	if (nsol != (1 << k))
		/* unexpected number of solutions */
		return 0;

	for (p = 0; p < nsol; p++) {
		/* set parameters for p-th solution */
		for (c = 0; c < k; c++)
			rows[param[c]] = (rows[param[c]] & ~1)|((p >> c) & 1);

		/* compute unique solution */
		tmp = 0;
		for (r = m-1; r >= 0; r--) {
			mask = rows[r] & (tmp|1);
			tmp |= parity(mask) << (m-r);
		}
		sol[p] = tmp >> 1;
	}
	return nsol;
}

/*
 * this function builds and solves a linear system for finding roots of a degree
 * 4 affine monic polynomial X^4+aX^2+bX+c over GF(2^m).
 */
static int find_affine4_roots(struct bch_control *bch, unsigned int a,
			      unsigned int b, unsigned int c,
			      unsigned int *roots)
{
	int i, j, k;
	const int m = GF_M(bch);
	unsigned int mask = 0xff, t, rows[16] = {0,};

	j = a_log(bch, b);
	k = a_log(bch, a);
	rows[0] = c;

	/* buid linear system to solve X^4+aX^2+bX+c = 0 */
	for (i = 0; i < m; i++) {
		rows[i+1] = bch->a_pow_tab[4*i]^
			(a ? bch->a_pow_tab[mod_s(bch, k)] : 0)^
			(b ? bch->a_pow_tab[mod_s(bch, j)] : 0);
		j++;
		k += 2;
	}
	/*
	 * transpose 16x16 matrix before passing it to linear solver
	 * warning: this code assumes m < 16
	 */
	for (j = 8; j != 0; j >>= 1, mask ^= (mask << j)) {
		for (k = 0; k < 16; k = (k+j+1) & ~j) {
			t = ((rows[k] >> j)^rows[k+j]) & mask;
			rows[k] ^= (t << j);
			rows[k+j] ^= t;
		}
	}
	return solve_linear_system(bch, rows, roots, 4);
}

/*
 * compute root r of a degree 1 polynomial over GF(2^m) (returned as log(1/r))
 */
static int find_poly_deg1_roots(struct bch_control *bch, struct gf_poly *poly,
				unsigned int *roots)
{
	int n = 0;

	if (poly->c[0])
		/* poly[X] = bX+c with c!=0, root=c/b */
		roots[n++] = mod_s(bch, GF_N(bch)-bch->a_log_tab[poly->c[0]]+
				   bch->a_log_tab[poly->c[1]]);
	return n;
}

/*
 * compute roots of a degree 2 polynomial over GF(2^m)
 */
static int find_poly_deg2_roots(struct bch_control *bch, struct gf_poly *poly,
				unsigned int *roots)
{
	int n = 0, i, l0, l1, l2;
	unsigned int u, v, r;

	if (poly->c[0] && poly->c[1]) {

		l0 = bch->a_log_tab[poly->c[0]];
		l1 = bch->a_log_tab[poly->c[1]];
		l2 = bch->a_log_tab[poly->c[2]];

		/* using z=a/bX, transform aX^2+bX+c into z^2+z+u (u=ac/b^2) */
		u = a_pow(bch, l0+l2+2*(GF_N(bch)-l1));
		/*
		 * let u = sum(li.a^i) i=0..m-1; then compute r = sum(li.xi):
		 * r^2+r = sum(li.(xi^2+xi)) = sum(li.(a^i+Tr(a^i).a^k)) =
		 * u + sum(li.Tr(a^i).a^k) = u+a^k.Tr(sum(li.a^i)) = u+a^k.Tr(u)
		 * i.e. r and r+1 are roots iff Tr(u)=0
		 */
		r = 0;
		v = u;
		while (v) {
			i = deg(v);
			r ^= bch->xi_tab[i];
			v ^= (1 << i);
		}
		/* verify root */
		if ((gf_sqr(bch, r)^r) == u) {
			/* reverse z=a/bX transformation and compute log(1/r) */
			roots[n++] = modulo(bch, 2*GF_N(bch)-l1-
					    bch->a_log_tab[r]+l2);
			roots[n++] = modulo(bch, 2*GF_N(bch)-l1-
					    bch->a_log_tab[r^1]+l2);
		}
	}
	return n;
}

/*
 * compute roots of a degree 3 polynomial over GF(2^m)
 */
static int find_poly_deg3_roots(struct bch_control *bch, struct gf_poly *poly,
				unsigned int *roots)
{
	int i, n = 0;
	unsigned int a, b, c, a2, b2, c2, e3, tmp[4];

	if (poly->c[0]) {
		/* transform polynomial into monic X^3 + a2X^2 + b2X + c2 */
		e3 = poly->c[3];
		c2 = gf_div(bch, poly->c[0], e3);
		b2 = gf_div(bch, poly->c[1], e3);
		a2 = gf_div(bch, poly->c[2], e3);

		/* (X+a2)(X^3+a2X^2+b2X+c2) = X^4+aX^2+bX+c (affine) */
		c = gf_mul(bch, a2, c2);           /* c = a2c2      */
		b = gf_mul(bch, a2, b2)^c2;        /* b = a2b2 + c2 */
		a = gf_sqr(bch, a2)^b2;            /* a = a2^2 + b2 */

		/* find the 4 roots of this affine polynomial */
		if (find_affine4_roots(bch, a, b, c, tmp) == 4) {
			/* remove a2 from final list of roots */
			for (i = 0; i < 4; i++) {
				if (tmp[i] != a2)
					roots[n++] = a_ilog(bch, tmp[i]);
			}
		}
	}
	return n;
}

/*
 * compute roots of a degree 4 polynomial over GF(2^m)
 */
static int find_poly_deg4_roots(struct bch_control *bch, struct gf_poly *poly,
				unsigned int *roots)
{
	int i, l, n = 0;
	unsigned int a, b, c, d, e = 0, f, a2, b2, c2, e4;

	if (poly->c[0] == 0)
		return 0;

	/* transform polynomial into monic X^4 + aX^3 + bX^2 + cX + d */
	e4 = poly->c[4];
	d = gf_div(bch, poly->c[0], e4);
	c = gf_div(bch, poly->c[1], e4);
	b = gf_div(bch, poly->c[2], e4);
	a = gf_div(bch, poly->c[3], e4);

	/* use Y=1/X transformation to get an affine polynomial */
	if (a) {
		/* first, eliminate cX by using z=X+e with ae^2+c=0 */
		if (c) {
			/* compute e such that e^2 = c/a */
			f = gf_div(bch, c, a);
			l = a_log(bch, f);
			l += (l & 1) ? GF_N(bch) : 0;
			e = a_pow(bch, l/2);
			/*
			 * use transformation z=X+e:
			 * z^4+e^4 + a(z^3+ez^2+e^2z+e^3) + b(z^2+e^2) +cz+ce+d
			 * z^4 + az^3 + (ae+b)z^2 + (ae^2+c)z+e^4+be^2+ae^3+ce+d
			 * z^4 + az^3 + (ae+b)z^2 + e^4+be^2+d
			 * z^4 + az^3 +     b'z^2 + d'
			 */
			d = a_pow(bch, 2*l)^gf_mul(bch, b, f)^d;
			b = gf_mul(bch, a, e)^b;
		}
		/* now, use Y=1/X to get Y^4 + b/dY^2 + a/dY + 1/d */
		if (d == 0)
			/* assume all roots have multiplicity 1 */
			return 0;

		c2 = gf_inv(bch, d);
		b2 = gf_div(bch, a, d);
		a2 = gf_div(bch, b, d);
	} else {
		/* polynomial is already affine */
		c2 = d;
		b2 = c;
		a2 = b;
	}
	/* find the 4 roots of this affine polynomial */
	if (find_affine4_roots(bch, a2, b2, c2, roots) == 4) {
		for (i = 0; i < 4; i++) {
			/* post-process roots (reverse transformations) */
			f = a ? gf_inv(bch, roots[i]) : roots[i];
			roots[i] = a_ilog(bch, f^e);
		}
		n = 4;
	}
	return n;
}

/*
 * build monic, log-based representation of a polynomial
 */
static void gf_poly_logrep(struct bch_control *bch,
			   const struct gf_poly *a, int *rep)
{
	int i, d = a->deg, l = GF_N(bch)-a_log(bch, a->c[a->deg]);

	/* represent 0 values with -1; warning, rep[d] is not set to 1 */
	for (i = 0; i < d; i++)
		rep[i] = a->c[i] ? mod_s(bch, a_log(bch, a->c[i])+l) : -1;
}

/*
 * compute polynomial Euclidean division remainder in GF(2^m)[X]
 */
static void gf_poly_mod(struct bch_control *bch, struct gf_poly *a,
			const struct gf_poly *b, int *rep)
{
	int la, p, m;
	unsigned int i, j, *c = a->c;
	const unsigned int d = b->deg;

	if (a->deg < d)
		return;

	/* reuse or compute log representation of denominator */
	if (!rep) {
		rep = bch->cache;
		gf_poly_logrep(bch, b, rep);
	}

	for (j = a->deg; j >= d; j--) {
		if (c[j]) {
			la = a_log(bch, c[j]);
			p = j-d;
			for (i = 0; i < d; i++, p++) {
				m = rep[i];
				if (m >= 0)
					c[p] ^= bch->a_pow_tab[mod_s(bch,
								     m+la)];
			}
		}
	}
	a->deg = d-1;
	while (!c[a->deg] && a->deg)
		a->deg--;
}

/*
 * compute polynomial Euclidean division quotient in GF(2^m)[X]
 */
static void gf_poly_div(struct bch_control *bch, struct gf_poly *a,
			const struct gf_poly *b, struct gf_poly *q)
{
	if (a->deg >= b->deg) {
		q->deg = a->deg-b->deg;
		/* compute a mod b (modifies a) */
		gf_poly_mod(bch, a, b, NULL);
		/* quotient is stored in upper part of polynomial a */
		memcpy(q->c, &a->c[b->deg], (1+q->deg)*sizeof(unsigned int));
	} else {
		q->deg = 0;
		q->c[0] = 0;
	}
}

/*
 * compute polynomial GCD (Greatest Common Divisor) in GF(2^m)[X]
 */
static struct gf_poly *gf_poly_gcd(struct bch_control *bch, struct gf_poly *a,
				   struct gf_poly *b)
{
	struct gf_poly *tmp;

	dbg("gcd(%s,%s)=", gf_poly_str(a), gf_poly_str(b));

	if (a->deg < b->deg) {
		tmp = b;
		b = a;
		a = tmp;
	}

	while (b->deg > 0) {
		gf_poly_mod(bch, a, b, NULL);
		tmp = b;
		b = a;
		a = tmp;
	}

	dbg("%s\n", gf_poly_str(a));

	return a;
}

/*
 * Given a polynomial f and an integer k, compute Tr(a^kX) mod f
 * This is used in Berlekamp Trace algorithm for splitting polynomials
 */
static void compute_trace_bk_mod(struct bch_control *bch, int k,
				 const struct gf_poly *f, struct gf_poly *z,
				 struct gf_poly *out)
{
	const int m = GF_M(bch);
	int i, j;

	/* z contains z^2j mod f */
	z->deg = 1;
	z->c[0] = 0;
	z->c[1] = bch->a_pow_tab[k];

	out->deg = 0;
	memset(out, 0, GF_POLY_SZ(f->deg));

	/* compute f log representation only once */
	gf_poly_logrep(bch, f, bch->cache);

	for (i = 0; i < m; i++) {
		/* add a^(k*2^i)(z^(2^i) mod f) and compute (z^(2^i) mod f)^2 */
		for (j = z->deg; j >= 0; j--) {
			out->c[j] ^= z->c[j];
			z->c[2*j] = gf_sqr(bch, z->c[j]);
			z->c[2*j+1] = 0;
		}
		if (z->deg > out->deg)
			out->deg = z->deg;

		if (i < m-1) {
			z->deg *= 2;
			/* z^(2(i+1)) mod f = (z^(2^i) mod f)^2 mod f */
			gf_poly_mod(bch, z, f, bch->cache);
		}
	}
	while (!out->c[out->deg] && out->deg)
		out->deg--;

	dbg("Tr(a^%d.X) mod f = %s\n", k, gf_poly_str(out));
}

/*
 * factor a polynomial using Berlekamp Trace algorithm (BTA)
 */
static void factor_polynomial(struct bch_control *bch, int k, struct gf_poly *f,
			      struct gf_poly **g, struct gf_poly **h)
{
	struct gf_poly *f2 = bch->poly_2t[0];
	struct gf_poly *q  = bch->poly_2t[1];
	struct gf_poly *tk = bch->poly_2t[2];
	struct gf_poly *z  = bch->poly_2t[3];
	struct gf_poly *gcd;

	dbg("factoring %s...\n", gf_poly_str(f));

	*g = f;
	*h = NULL;

	/* tk = Tr(a^k.X) mod f */
	compute_trace_bk_mod(bch, k, f, z, tk);

	if (tk->deg > 0) {
		/* compute g = gcd(f, tk) (destructive operation) */
		gf_poly_copy(f2, f);
		gcd = gf_poly_gcd(bch, f2, tk);
		if (gcd->deg < f->deg) {
			/* compute h=f/gcd(f,tk); this will modify f and q */
			gf_poly_div(bch, f, gcd, q);
			/* store g and h in-place (clobbering f) */
			*h = &((struct gf_poly_deg1 *)f)[gcd->deg].poly;
			gf_poly_copy(*g, gcd);
			gf_poly_copy(*h, q);
		}
	}
}

/*
 * find roots of a polynomial, using BTZ algorithm; see the beginning of this
 * file for details
 */
static int find_poly_roots(struct bch_control *bch, unsigned int k,
			   struct gf_poly *poly, unsigned int *roots)
{
	int cnt;
	struct gf_poly *f1, *f2;

	switch (poly->deg) {
		/* handle low degree polynomials with ad hoc techniques */
	case 1:
		cnt = find_poly_deg1_roots(bch, poly, roots);
		break;
	case 2:
		cnt = find_poly_deg2_roots(bch, poly, roots);
		break;
	case 3:
		cnt = find_poly_deg3_roots(bch, poly, roots);
		break;
	case 4:
		cnt = find_poly_deg4_roots(bch, poly, roots);
		break;
	default:
		/* factor polynomial using Berlekamp Trace Algorithm (BTA) */
		cnt = 0;
		if (poly->deg && (k <= GF_M(bch))) {
			factor_polynomial(bch, k, poly, &f1, &f2);
			if (f1)
				cnt += find_poly_roots(bch, k+1, f1, roots);
			if (f2)
				cnt += find_poly_roots(bch, k+1, f2, roots+cnt);
		}
		break;
	}
	return cnt;
}

#if defined(USE_CHIEN_SEARCH)
/*
 * exhaustive root search (Chien) implementation - not used, included only for
 * reference/comparison tests
 */
static int chien_search(struct bch_control *bch, unsigned int len,
			struct gf_poly *p, unsigned int *roots)
{
	int m;
	unsigned int i, j, syn, syn0, count = 0;
	const unsigned int k = 8*len+bch->ecc_bits;

	/* use a log-based representation of polynomial */
	gf_poly_logrep(bch, p, bch->cache);
	bch->cache[p->deg] = 0;
	syn0 = gf_div(bch, p->c[0], p->c[p->deg]);

	for (i = GF_N(bch)-k+1; i <= GF_N(bch); i++) {
		/* compute elp(a^i) */
		for (j = 1, syn = syn0; j <= p->deg; j++) {
			m = bch->cache[j];
			if (m >= 0)
				syn ^= a_pow(bch, m+j*i);
		}
		if (syn == 0) {
			roots[count++] = GF_N(bch)-i;
			if (count == p->deg)
				break;
		}
	}
	return (count == p->deg) ? count : 0;
}
#define find_poly_roots(_p, _k, _elp, _loc) chien_search(_p, len, _elp, _loc)
#endif /* USE_CHIEN_SEARCH */

/**
 * decode_bch - decode received codeword and find bit error locations
 * @bch:      BCH control structure
 * @data:     received data, ignored if @calc_ecc is provided
 * @len:      data length in bytes, must always be provided
 * @recv_ecc: received ecc, if NULL then assume it was XORed in @calc_ecc
 * @calc_ecc: calculated ecc, if NULL then calc_ecc is computed from @data
 * @syn:      hw computed syndrome data (if NULL, syndrome is calculated)
 * @errloc:   output array of error locations
 *
 * Returns:
 *  The number of errors found, or -EBADMSG if decoding failed, or -EINVAL if
 *  invalid parameters were provided
 *
 * Depending on the available hw BCH support and the need to compute @calc_ecc
 * separately (using encode_bch()), this function should be called with one of
 * the following parameter configurations -
 *
 * by providing @data and @recv_ecc only:
 *   decode_bch(@bch, @data, @len, @recv_ecc, NULL, NULL, @errloc)
 *
 * by providing @recv_ecc and @calc_ecc:
 *   decode_bch(@bch, NULL, @len, @recv_ecc, @calc_ecc, NULL, @errloc)
 *
 * by providing ecc = recv_ecc XOR calc_ecc:
 *   decode_bch(@bch, NULL, @len, NULL, ecc, NULL, @errloc)
 *
 * by providing syndrome results @syn:
 *   decode_bch(@bch, NULL, @len, NULL, NULL, @syn, @errloc)
 *
 * Once decode_bch() has successfully returned with a positive value, error
 * locations returned in array @errloc should be interpreted as follows -
 *
 * if (errloc[n] >= 8*len), then n-th error is located in ecc (no need for
 * data correction)
 *
 * if (errloc[n] < 8*len), then n-th error is located in data and can be
 * corrected with statement data[errloc[n]/8] ^= 1 << (errloc[n] % 8);
 *
 * Note that this function does not perform any data correction by itself, it
 * merely indicates error locations.
 */
int decode_bch(struct bch_control *bch, const uint8_t *data, unsigned int len,
	       const uint8_t *recv_ecc, const uint8_t *calc_ecc,
	       const unsigned int *syn, unsigned int *errloc)
{
	const unsigned int ecc_words = BCH_ECC_WORDS(bch);
	unsigned int nbits;
	int i, err, nroots;
	uint32_t sum;

	/* sanity check: make sure data length can be handled */
	if (8*len > (bch->n-bch->ecc_bits))
		return -1;

	/* if caller does not provide syndromes, compute them */
	if (!syn) {
		if (!calc_ecc) {
			/* compute received data ecc into an internal buffer */
			if (!data || !recv_ecc)
				return -1;
			encode_bch(bch, data, len, NULL);
		} else {
			/* load provided calculated ecc */
			load_ecc8(bch, bch->ecc_buf, calc_ecc);
		}
		/* load received ecc or assume it was XORed in calc_ecc */
		if (recv_ecc) {
			load_ecc8(bch, bch->ecc_buf2, recv_ecc);
			/* XOR received and calculated ecc */
			for (i = 0, sum = 0; i < (int)ecc_words; i++) {
				bch->ecc_buf[i] ^= bch->ecc_buf2[i];
				sum |= bch->ecc_buf[i];
			}
			if (!sum)
				/* no error found */
				return 0;
		}
		compute_syndromes(bch, bch->ecc_buf, bch->syn);
		syn = bch->syn;
	}

	err = compute_error_locator_polynomial(bch, syn);
	if (err > 0) {
		nroots = find_poly_roots(bch, 1, bch->elp, errloc);
		if (err != nroots)
			err = -1;
	}
	if (err > 0) {
		/* post-process raw error locations for easier correction */
		nbits = (len*8)+bch->ecc_bits;
		for (i = 0; i < err; i++) {
			if (errloc[i] >= nbits) {
				err = -1;
				break;
			}
			errloc[i] = nbits-1-errloc[i];
			errloc[i] = (errloc[i] & ~7)|(7-(errloc[i] & 7));
		}
	}
	return (err >= 0) ? err : -1;
}
//EXPORT_SYMBOL_GPL(decode_bch);

/*
 * generate Galois field lookup tables
 */
static int build_gf_tables(struct bch_control *bch, unsigned int poly)
{
	unsigned int i, x = 1;
	const unsigned int k = 1 << deg(poly);

	/* primitive polynomial must be of degree m */
	if (k != (1u << GF_M(bch)))
		return -1;

	for (i = 0; i < GF_N(bch); i++) {
		bch->a_pow_tab[i] = x;
		bch->a_log_tab[x] = i;
		if (i && (x == 1))
			/* polynomial is not primitive (a^i=1 with 0<i<2^m-1) */
			return -1;
		x <<= 1;
		if (x & k)
			x ^= poly;
	}
	bch->a_pow_tab[GF_N(bch)] = 1;
	bch->a_log_tab[0] = 0;

	return 0;
}

/*
 * compute generator polynomial remainder tables for fast encoding
 */
static void build_mod8_tables(struct bch_control *bch, const uint32_t *g)
{
	int i, j, b, d;
	uint32_t data, hi, lo, *tab;
	const int l = BCH_ECC_WORDS(bch);
	const int plen = DIV_ROUND_UP(bch->ecc_bits+1, 32);
	const int ecclen = DIV_ROUND_UP(bch->ecc_bits, 32);

	memset(bch->mod8_tab, 0, 4*256*l*sizeof(*bch->mod8_tab));

	for (i = 0; i < 256; i++) {
		/* p(X)=i is a small polynomial of weight <= 8 */
		for (b = 0; b < 4; b++) {
			/* we want to compute (p(X).X^(8*b+deg(g))) mod g(X) */
			tab = bch->mod8_tab + (b*256+i)*l;
			data = i << (8*b);
			while (data) {
				d = deg(data);
				/* subtract X^d.g(X) from p(X).X^(8*b+deg(g)) */
				data ^= g[0] >> (31-d);
				for (j = 0; j < ecclen; j++) {
					hi = (d < 31) ? g[j] << (d+1) : 0;
					lo = (j+1 < plen) ?
						g[j+1] >> (31-d) : 0;
					tab[j] ^= hi|lo;
				}
			}
		}
	}
}

/*
 * build a base for factoring degree 2 polynomials
 */
static int build_deg2_base(struct bch_control *bch)
{
	const int m = GF_M(bch);
	int i, j, r;
	unsigned int sum, x, y, remaining, ak = 0, xi[m];

	/* find k s.t. Tr(a^k) = 1 and 0 <= k < m */
	for (i = 0; i < m; i++) {
		for (j = 0, sum = 0; j < m; j++)
			sum ^= a_pow(bch, i*(1 << j));

		if (sum) {
			ak = bch->a_pow_tab[i];
			break;
		}
	}
	/* find xi, i=0..m-1 such that xi^2+xi = a^i+Tr(a^i).a^k */
	remaining = m;
	memset(xi, 0, sizeof(xi));

	for (x = 0; (x <= GF_N(bch)) && remaining; x++) {
		y = gf_sqr(bch, x)^x;
		for (i = 0; i < 2; i++) {
			r = a_log(bch, y);
			if (y && (r < m) && !xi[r]) {
				bch->xi_tab[r] = x;
				xi[r] = 1;
				remaining--;
				dbg("x%d = %x\n", r, x);
				break;
			}
			y ^= ak;
		}
	}
	/* should not happen but check anyway */
	return remaining ? -1 : 0;
}

static void *bch_alloc(size_t size, int *err)
{
	void *ptr;

	//ptr = kmalloc(size, GFP_KERNEL);
	ptr = malloc(size);
	if (ptr == NULL)
		*err = 1;
	return ptr;
}

/*
 * compute generator polynomial for given (m,t) parameters.
 */
static uint32_t *compute_generator_polynomial(struct bch_control *bch)
{
	const unsigned int m = GF_M(bch);
	const unsigned int t = GF_T(bch);
	int n, err = 0;
	unsigned int i, j, nbits, r, word, *roots;
	struct gf_poly *g;
	uint32_t *genpoly;

	g = bch_alloc(GF_POLY_SZ(m*t), &err);
	roots = bch_alloc((bch->n+1)*sizeof(*roots), &err);
	genpoly = bch_alloc(DIV_ROUND_UP(m*t+1, 32)*sizeof(*genpoly), &err);

	if (err) {
		free(genpoly);
		genpoly = NULL;
		goto finish;
	}

	/* enumerate all roots of g(X) */
	memset(roots , 0, (bch->n+1)*sizeof(*roots));
	for (i = 0; i < t; i++) {
		for (j = 0, r = 2*i+1; j < m; j++) {
			roots[r] = 1;
			r = mod_s(bch, 2*r);
		}
	}
	/* build generator polynomial g(X) */
	g->deg = 0;
	g->c[0] = 1;
	for (i = 0; i < GF_N(bch); i++) {
		if (roots[i]) {
			/* multiply g(X) by (X+root) */
			r = bch->a_pow_tab[i];
			g->c[g->deg+1] = 1;
			for (j = g->deg; j > 0; j--)
				g->c[j] = gf_mul(bch, g->c[j], r)^g->c[j-1];

			g->c[0] = gf_mul(bch, g->c[0], r);
			g->deg++;
		}
	}
	/* store left-justified binary representation of g(X) */
	n = g->deg+1;
	i = 0;

	while (n > 0) {
		nbits = (n > 32) ? 32 : n;
		for (j = 0, word = 0; j < nbits; j++) {
			if (g->c[n-1-j])
				word |= 1u << (31-j);
		}
		genpoly[i++] = word;
		n -= nbits;
	}
	bch->ecc_bits = g->deg;

finish:
	free(g);
	free(roots);

	return genpoly;
}

/**
 * init_bch - initialize a BCH encoder/decoder
 * @m:          Galois field order, should be in the range 5-15
 * @t:          maximum error correction capability, in bits
 * @prim_poly:  user-provided primitive polynomial (or 0 to use default)
 *
 * Returns:
 *  a newly allocated BCH control structure if successful, NULL otherwise
 *
 * This initialization can take some time, as lookup tables are built for fast
 * encoding/decoding; make sure not to call this function from a time critical
 * path. Usually, init_bch() should be called on module/driver init and
 * free_bch() should be called to release memory on exit.
 *
 * You may provide your own primitive polynomial of degree @m in argument
 * @prim_poly, or let init_bch() use its default polynomial.
 *
 * Once init_bch() has successfully returned a pointer to a newly allocated
 * BCH control structure, ecc length in bytes is given by member @ecc_bytes of
 * the structure.
 */
struct bch_control *init_bch(int m, int t, unsigned int prim_poly)
{
	int err = 0;
	unsigned int i, words;
	uint32_t *genpoly;
	struct bch_control *bch = NULL;

	const int min_m = 5;
	const int max_m = 15;

	/* default primitive polynomials */
	static const unsigned int prim_poly_tab[] = {
		0x25, 0x43, 0x83, 0x11d, 0x211, 0x409, 0x805, 0x1053, 0x201b,
		0x402b, 0x8003,
	};

#if defined(CONFIG_BCH_CONST_PARAMS)
	if ((m != (CONFIG_BCH_CONST_M)) || (t != (CONFIG_BCH_CONST_T))) {
		printk(KERN_ERR "bch encoder/decoder was configured to support "
		       "parameters m=%d, t=%d only!\n",
		       CONFIG_BCH_CONST_M, CONFIG_BCH_CONST_T);
		goto fail;
	}
#endif
	if ((m < min_m) || (m > max_m))
		/*
		 * values of m greater than 15 are not currently supported;
		 * supporting m > 15 would require changing table base type
		 * (uint16_t) and a small patch in matrix transposition
		 */
		goto fail;

	/* sanity checks */
	if ((t < 1) || (m*t >= ((1 << m)-1)))
		/* invalid t value */
		goto fail;

	/* select a primitive polynomial for generating GF(2^m) */
	if (prim_poly == 0)
		prim_poly = prim_poly_tab[m-min_m];

	//bch = kzalloc(sizeof(*bch), GFP_KERNEL);
	bch = malloc(sizeof(*bch));
	if (bch == NULL)
		goto fail;

	bch->m = m;
	bch->t = t;
	bch->n = (1 << m)-1;
	words  = DIV_ROUND_UP(m*t, 32);
	bch->ecc_bytes = DIV_ROUND_UP(m*t, 8);
	bch->a_pow_tab = bch_alloc((1+bch->n)*sizeof(*bch->a_pow_tab), &err);
	bch->a_log_tab = bch_alloc((1+bch->n)*sizeof(*bch->a_log_tab), &err);
	bch->mod8_tab  = bch_alloc(words*1024*sizeof(*bch->mod8_tab), &err);
	bch->ecc_buf   = bch_alloc(words*sizeof(*bch->ecc_buf), &err);
	bch->ecc_buf2  = bch_alloc(words*sizeof(*bch->ecc_buf2), &err);
	bch->xi_tab    = bch_alloc(m*sizeof(*bch->xi_tab), &err);
	bch->syn       = bch_alloc(2*t*sizeof(*bch->syn), &err);
	bch->cache     = bch_alloc(2*t*sizeof(*bch->cache), &err);
	bch->elp       = bch_alloc((t+1)*sizeof(struct gf_poly_deg1), &err);

	for (i = 0; i < ARRAY_SIZE(bch->poly_2t); i++)
		bch->poly_2t[i] = bch_alloc(GF_POLY_SZ(2*t), &err);

	if (err)
		goto fail;

	err = build_gf_tables(bch, prim_poly);
	if (err)
		goto fail;

	/* use generator polynomial for computing encoding tables */
	genpoly = compute_generator_polynomial(bch);
	if (genpoly == NULL)
		goto fail;

	build_mod8_tables(bch, genpoly);
	free(genpoly);

	err = build_deg2_base(bch);
	if (err)
		goto fail;

	return bch;

fail:
	free_bch(bch);
	return NULL;
}
//EXPORT_SYMBOL_GPL(init_bch);

/**
 *  free_bch - free the BCH control structure
 *  @bch:    BCH control structure to release
 */
void free_bch(struct bch_control *bch)
{
	unsigned int i;
	if (bch) {
		free(bch->a_pow_tab);
		free(bch->a_log_tab);
		free(bch->mod8_tab);
		free(bch->ecc_buf);
		free(bch->ecc_buf2);
		free(bch->xi_tab);
		free(bch->syn);
		free(bch->cache);
		free(bch->elp);

		for (i = 0; i < ARRAY_SIZE(bch->poly_2t); i++)
			free(bch->poly_2t[i]);

		free(bch);
	}
}

void display_info(unsigned char *buf, unsigned int cont)
{
  int i,j=cont;
  for(i=0;i<j;i++)
  {
      if((i%10) == 0)
        printf("\n\r\t");
      printf(" 0x%02x",buf[i]);
  }
  printf("\n\r");
}

#if 0
#define BCH 40
#define ECCSIZE 1024
#define ECCBYTES (BCH*14+7)/8   //1024*8 < 2^m - 1
#else
#define BCH 4
#define ECCSIZE 512
#define ECCBYTES (BCH*13+7)/8   //1024*8 < 2^m - 1
#endif


int main()
{
  int i;
  int count;
	unsigned int m, t;
  unsigned int *errloc; 
  unsigned char code[ECCBYTES];
  unsigned char code1[ECCBYTES];
	struct bch_control *bch = NULL;

  unsigned char buf[ECCSIZE];
  unsigned char buf1[ECCSIZE];
	
  memset(buf, 0, ECCSIZE);
  memset(buf1, 0, ECCSIZE);
	
  m = fls(1+8*ECCSIZE);
	t = (ECCBYTES*8)/m;

  printf("bch ecc: eccsize=%d eccbytes=%d m=%d t=%d \n\r",ECCSIZE,ECCBYTES,m,t);

  bch = init_bch(m,t,0);

  for(i=0;i<BCH;i++)
  {
    buf[i] = i;
    buf1[i] = i;
  }
  //strcpy(buf1, buf);

  printf("buf_old:");
  display_info(buf,BCH+5);

	memset(code, 0, ECCBYTES);
  encode_bch(bch, buf, ECCSIZE, code);
  printf("bch_ecc:");
  display_info(code,ECCBYTES);

#if 1
  //for(i=BCH;i<BCH+5;i++)
  for(i=0;i<BCH;i++)
  {
      if(buf[i]&0x01)
        buf[i] &=0xfe;
      else
        buf[i] |= 0x01;

  //  buf[i]=0xff;
  }
  printf("buf_cha:");
  display_info(buf,BCH+5);
#endif

#if 0
  for(i=BCH;i<BCH+5;i++)
  //for(i=0;i<BCH;i++)
  {
    if(code[i]&0x01)
      code[i] &= 0xfe;
    else
      code[i] |= 0x01;
    code[i] = 0x00;
  }
  printf("bch_ecc:");
  display_info(code,ECCBYTES);
#endif

	memset(code1, 0, ECCBYTES);
  encode_bch(bch, buf, ECCSIZE, code1);

	errloc = malloc(4*sizeof(*errloc));
  count = decode_bch(bch, NULL, ECCSIZE, code, code1, NULL,errloc);
  
  printf("conut: %d\n\r",count);

  if (count > 0)
  {
    printf("errloc:");
    for(i=0;i<count;i++)
    {
      if((i%10) == 0)
        printf("\n\r\t");
      printf(" 0x%04x",errloc[i]);
    }
    printf("\n\r");

    for(i=0; i<count; i++)  
    {
      if(errloc[i] < ECCSIZE*8)
            buf[errloc[i] >> 3] ^= (1<< (errloc[i] & 7));
    }
  }
  
  printf("buf_err:\n\r");
  for(i=0;i<ECCSIZE;i++)
  {
      if(buf1[i] != buf[i])
        printf("\t buf[%d]=0x%x err data is 0x%x \n\r",i,buf1[i],buf[i]);
  }
  
//  free_bch(bch);

  return 0;
}

2、bch.h

/*
 * Generic binary BCH encoding/decoding library
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published by
 * the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc., 51
 * Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
 *
 * Copyright © 2011 Parrot S.A.
 *
 * Author: Ivan Djelic <ivan.djelic@parrot.com>
 *
 * Description:
 *
 * This library provides runtime configurable encoding/decoding of binary
 * Bose-Chaudhuri-Hocquenghem (BCH) codes.
*/
#ifndef _BCH_H
#define _BCH_H

//#include <machine/types.h>
//#include <linux/types.h>
#include "types.h"

#define DIV_ROUND_UP(n,d)       (((n) + (d) - 1) / (d))
/**
 * struct bch_control - BCH control structure
 * @m:          Galois field order
 * @n:          maximum codeword size in bits (= 2^m-1)
 * @t:          error correction capability in bits
 * @ecc_bits:   ecc exact size in bits, i.e. generator polynomial degree (<=m*t)
 * @ecc_bytes:  ecc max size (m*t bits) in bytes
 * @a_pow_tab:  Galois field GF(2^m) exponentiation lookup table
 * @a_log_tab:  Galois field GF(2^m) log lookup table
 * @mod8_tab:   remainder generator polynomial lookup tables
 * @ecc_buf:    ecc parity words buffer
 * @ecc_buf2:   ecc parity words buffer
 * @xi_tab:     GF(2^m) base for solving degree 2 polynomial roots
 * @syn:        syndrome buffer
 * @cache:      log-based polynomial representation buffer
 * @elp:        error locator polynomial
 * @poly_2t:    temporary polynomials of degree 2t
 */
struct bch_control {
	unsigned int    m;
	unsigned int    n;
	unsigned int    t;
	unsigned int    ecc_bits;
	unsigned int    ecc_bytes;
/* private: */
	uint16_t       *a_pow_tab;
	uint16_t       *a_log_tab;
	uint32_t       *mod8_tab;
	uint32_t       *ecc_buf;
	uint32_t       *ecc_buf2;
	unsigned int   *xi_tab;
	unsigned int   *syn;
	int            *cache;
	struct gf_poly *elp;
	struct gf_poly *poly_2t[4];
};

struct bch_control *init_bch(int m, int t, unsigned int prim_poly);

void free_bch(struct bch_control *bch);

void encode_bch(struct bch_control *bch, const uint8_t *data,
		unsigned int len, uint8_t *ecc);

int decode_bch(struct bch_control *bch, const uint8_t *data, unsigned int len,
	       const uint8_t *recv_ecc, const uint8_t *calc_ecc,
	       const unsigned int *syn, unsigned int *errloc);

#endif /* _BCH_H */

3、types.h

/*	$OpenBSD: types.h,v 1.6 1999/01/27 04:46:06 imp Exp $	*/

/*-
 * Copyright (c) 1992, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * This code is derived from software contributed to Berkeley by
 * Ralph Campbell.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)types.h	8.3 (Berkeley) 1/5/94
 */

#ifndef	_MIPS_TYPES_H_
#define	_MIPS_TYPES_H_

//#include <sys/cdefs.h>

typedef	unsigned long	vm_offset_t;
typedef	unsigned long	vm_size_t;

typedef unsigned long	vaddr_t;
typedef unsigned long	paddr_t;
typedef unsigned long	vsize_t;
typedef unsigned long	psize_t;

/*
 * Basic integral types.  Omit the typedef if
 * not possible for a machine/compiler combination.
 */
typedef	__signed char		   int8_t;
typedef	unsigned char		 u_int8_t;
typedef	unsigned char		  uint8_t;
typedef	short			  int16_t;
typedef	unsigned short		u_int16_t;
typedef	unsigned short		 uint16_t;
typedef	int			  int32_t;
typedef	unsigned int		u_int32_t;
typedef	unsigned int		 uint32_t;
/* LONGLONG */
typedef	unsigned long long	 uint64_t;

#if !defined(_ANSI_SOURCE) && !defined(_POSIX_SOURCE)
typedef struct _physadr {
	int r[1];
} *physadr;

typedef struct label_t {
	register_t val[12];
} label_t;
#endif

#define	__SWAP_BROKEN

#endif	/* !_MIPS_TYPES_H_ */
  • 1
    点赞
  • 8
    收藏
  • 打赏
    打赏
  • 1
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
©️2022 CSDN 皮肤主题:精致技术 设计师:CSDN官方博客 返回首页
评论 1

打赏作者

大、猫

感谢老铁!

¥2 ¥4 ¥6 ¥10 ¥20
输入1-500的整数
余额支付 (余额:-- )
扫码支付
扫码支付:¥2
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、C币套餐、付费专栏及课程。

余额充值