文档编号:Application Note CM3013
1.名词解释:
1.1cavitation
What Is Cavitation? | Pumps & Systems
叶片在液体中扰动形成的超声波
1.2 stiff machine
https://suspensionlist.com/the-pros-and-cons-of-stiff-vs-soft-suspension-systems/
1.3 spectral emmited energy related sensor
https://www.electronicshub.org/different-types-sensors/
1.4 thrust bearing
How does Thrust Bearing work? | Types of the Thrust Bearings
1.5 predictive maintainance program
预防性维护
1.6 Non-impact type signal such as pure tone/waviness types
振动的谱线中pure tone对应着周期性起伏的信号,waviness也是一种低频震荡。包络处理的是一些冲击性的振动。
2.断语:
2.1.包络的强度趋势数据会逐渐平缓
2.2 包络不适用的场景
Enveloping measurements do not reflect significant readings in applications which look at other things besides impact defects, such as misalignment, gear backlash, and applications on very slow speed machinery.
2.3 最适合的场景是那些渐进式的故障源
bearing, gears...
然后大型机械设备上,因为加速度量程的因素,包络计算并不适合。因为相关信号太小。
它可以用SEE sensors - spectral emmited energy
包络适用于故障产生的初期。
2.4 振动传感器的安装条件
1kg , or 2.2lbs的压力
振动方向的同方向上,不超过+-10degree.
安装界面清洁平整
安装导致的读数差异会在2~3倍左右。
2.5 包络曲线的特征不应该与低频振动具备相关性
如果出现相关性,说明包络的设置不对
包络谱的最低频率大概是10倍的转频——所有的齿数和内外圈故障频率都在这个数值以上。
然后包络谱的最高频率大概是6倍的外圈故障,大概是基础转频的200倍。
2.6 包络需要高信噪比传感器
推荐50~100mv/G这个区间,转速越慢,需要加速度传感器要有更高的信噪比。