wifi模块异步处理库编写

写这个的库的初衷说来也尴尬。github上找不到好用的库，有几个star挺高的，但是并不好用，而且写的也不怎么好。

本地的环境是freertos+stm32
所以对模块的初始化和使用有异步的需求。

大体的设计思路就是
1，串口 DMA+IDLE实现回调函数获取串口数据。
2，处理串口数据进行字符匹配
3，状态机和标志位实现指令流程。（这里没用，蓝牙模块有用）

githu链接地址：

git@github.com:writeing/wifilib.git

上代码

const static stu_wifiCmdRpyInfo sg_stuWifiCmdStatusBuff[] = 
{
    {"WIFI GOT IP",WIFI_RPY_REPLY},
    {"ALREADY",WIFI_RPY_ALREADY},
    {"ERROR",WIFI_RPY_ERROR},
    {"CONNECTED",WIFI_RPY_CONNECT},
    {"CONNECT",WIFI_RPY_CONNECT},
    {"CLOSE",WIFI_RPY_CLOSE,wifi_rpyCallBack},
    {"DISCONNECT",WIFI_RPY_DISCONNECT,wifi_rpyCallBack},
    {">",WIFI_RPY_TRANSPART},
    {"OK",WIFI_RPY_OK},
};

这个结构图记录返回字符对应的状态和回调函数

void setWifiData(uint8_t *oriData,int len)
{
//rpy
    for(int i = 0 ; i < ARRAY_LEN(sg_stuWifiCmdStatusBuff) ; i ++)
    {
        if(strstr(oriData,sg_stuWifiCmdStatusBuff[i].revCmdBuff) != NULL)
        {
            sg_rpych |= sg_stuWifiCmdStatusBuff[i].reyStatus;
            if(sg_stuWifiCmdStatusBuff[i].callback != NULL)
            {
                sg_stuWifiCmdStatusBuff[i].callback(sg_stuWifiCmdStatusBuff[i].revCmdBuff);
            }            
        }
    }
     
//cmd     
    if(strstr((char *)oriData,sg_revCmdBuff) != NULL)
    {        
        sg_wifi_cmd_status = 1;
        
    }		
}

进行字符匹配，因为wifi&BT的状态位会返回好几个标志，所以采用了或运算，

//timeout ms
int waitWifiCmdStatus(int timeOut,int rpy)
{
    for(int i = 0; i < timeOut ; i ++)
    {
        osDelay(1);
        if(sg_wifi_cmd_status && (rpy & rpy))
            return WIFI_RPY_SUCCESS;
    }
    return sg_rpych;
    
}
//1 trasport 
//0 cmd
int wifi_SetCipmode(int mode)
{
    char buff[50];
    int len = sprintf(buff,"AT+CIPMODE=%d\r\n",mode);
    setWifiCmdBuff("CIPMODE");
    wifi_sendCmdData((uint8_t *)buff,len);
    int rpy = waitWifiCmdStatus(500,WIFI_RPY_OK);    
    if(rpy == WIFI_RPY_SUCCESS)
        return 1;
    else 
        return 0;
}
int wifi_SetRfPower(int Power_0_to_82)
{
    char buff[50];
    int len = sprintf(buff,"AT+RFPOWER=%d\r\n",Power_0_to_82);
    setWifiCmdBuff("RFPOWER");
    wifi_sendCmdData((uint8_t *)buff,len);
    int rpy = waitWifiCmdStatus(500,WIFI_RPY_OK);    
    if(rpy == WIFI_RPY_SUCCESS)
        return 1;
    else 
        return 0;
}

int wifi_Station_DhcpEnable(int Enable)
{    
    char buff[50];
    int len = sprintf(buff,"AT+CWDHCP_CUR=1,%d\r\n",Enable);
    setWifiCmdBuff("CWDHCP_CUR");
    wifi_sendCmdData((uint8_t *)buff,len);
    int rpy = waitWifiCmdStatus(500,WIFI_RPY_OK);    
    if(rpy == WIFI_RPY_SUCCESS)
        return 1;
    else 
        return 0;
}
int wifi_TcpIp_StartTcpConnection(char *RemoteIp,uint16_t RemotePort,uint16_t TimeOut)
{    
    char buff[100];
    int len = sprintf(buff,"AT+CIPSTART=\"TCP\",\"%s\",%d,%d\r\n",RemoteIp,RemotePort,TimeOut);	    
    for(int j = 0 ; j <10 ; j ++)
    {
        setWifiCmdBuff("CIPSTART");
        wifi_sendCmdData((uint8_t *)buff,len);
        osDelay(1000);		
        for(int i = 0;  i < 10 ; i ++)
        {            		
            if(sg_rpych & WIFI_RPY_REPLY)
                continue;
            if(WIFI_RPY_ALREADY & sg_rpych)
                return 1;
            if(sg_rpych & WIFI_RPY_CONNECT && sg_wifi_cmd_status == 1)
                return 1;
            osDelay(500);
        }
    }
    return 0;
}

这就是发送指令的函数，
waitWifiCmdStatus 函数判断返回的指令和状态是期望值，就认为通过。

int setWifiCmdStatus(int rpy)
{
    static int wifiStatus = 1;
    wifiStatus &= rpy;
    if(!wifiStatus)
    {
        printf("%s cmd had error rpyflag = %d\n",sg_revCmdBuff,sg_rpych);
    }
    return wifiStatus;
}

void wifi_userMain()
{
    if(wifi_waitAT() == 0)
    {
        printf("AT CMD not return\r\n");
        return;
    }
	wifi_RST();
    setWifiCmdStatus(wifi_SetRfPower(82));
    wifi_TcpIp_Close();
    setWifiCmdStatus(wifi_Station_DhcpEnable(1));
    setWifiCmdStatus(wifi_Station_ConnectToAp(SSID,PASSWD));
    setWifiCmdStatus(wifi_TcpIp_StartTcpConnection(REMOTE_IP,REMOTE_PORT,CONNECT_TIME_OUT));
    setWifiCmdStatus(wifi_SetCipmode(1));
    sg_wifiInitFlag = setWifiCmdStatus(wifi_cipSend());    
    printf("sg_wifiInitFlag = %d\r\n",sg_wifiInitFlag);
}

这里是初始化代码，同时对每个函数做一个简单的状态记录。

库配置了一个init函数和当前状态返回和处理函数，可以在user添加一个loop做实时监控，如果wifi或者tcp断开链接可以及时处理