如何去掉部分铺铜 负片 setup —>Drawing Options, 在Thermal pads 和Filled Pads前面画勾 Add shape 画一个封闭区域 Edit —>Change Net (Name)指定网络 shape Fill 敷铜完成 正片 Add shape 画一个封闭区域选择Crosshatch或Solid Fill Edit —>Change Net (Name)指定网络 Shape —>Parameters参数设置 Void —>Auto自动避让 shape Fill 敷铜完成 注意:金属化孔要事先做好flash symbol! 铜区的编辑(shape的修改) Edit —> shape Edit —> Vertex 或Edit —> Boundary来改变shape的外部形状 shape —> Fill --------------------------------------------------------------------------------------------------------- 一、先设置铺铜参数: Shape->Global Dynamic Params... 1、Shape fill取缺省参数 2、Void controls: Artwork format->Gerber 6x00 Create pin voids->in line (平滑pin与pin之间因敷铜产生的的尖角) 3、Clearance中输入网络间距:如25.00 4、Thermal relief connects中设定铺铜和同名网络的连接方式 二、Shape->Polygon/Rectangular/Circular, 然后在Options选择要铺铜的层(如Etch/Top), Shape Fill 为Dynamic copper Assign net name 中指定铺铜要连接的网络(如GND), 三、铺铜完毕后,如果要删除死铜, 则:Shape->Delete Islands, 四、如果要挖掉部分铺铜, 则:Shape->Manul void->... ------------------------------------------------------------------------------------- 敷铜 shape add rect->option->assign net name 去掉敷铜岛 isand_delete->option->delete all on layer |
接AD技巧
最新推荐文章于 2024-06-27 22:43:22 发布