Mbed OS 文档翻译 之 参考（API（驱动（BusInOut）））

BusInOut

                                                                      

                                                                            BusInOut 类层次结构

使用 BusInOut 接口作为双向总线，支持最多 16 个 DigitalInOut 引脚，您可以读取和写入一个值。

您可以将任何编号的 Arm Mbed 引脚用作 DigitalInOut。

提示:

构造函数中引脚的顺序是字节顺序中引脚的相反顺序。如果你有 BusInOut（a，b，c，d，e，f，g，h），那么字节中的位的顺序是 hgfedcba，其中 a 位为 0，b 为位 1，c 为位 2，依此类推。

BusInOut 类参考

mbed::BusInOut 类参考

公共成员函数
	BusInOut (PinName p0, PinName p1=NC, PinName p2=NC, PinName p3=NC, PinName p4=NC, PinName p5=NC, PinName p6=NC, PinName p7=NC, PinName p8=NC, PinName p9=NC, PinName p10=NC, PinName p11=NC, PinName p12=NC, PinName p13=NC, PinName p14=NC, PinName p15=NC)
	BusInOut (PinName pins[16])
void	write (int value)
int	read ()
void	output ()
void	input ()
void	mode (PinMode pull)
int	mask ()
BusInOut &	operator= (int v)
BusInOut &	operator= (BusInOut &rhs)
DigitalInOut &	operator[] (int index)
	operator int ()

受保护的成员函数
virtual void	lock ()
virtual void	unlock ()

受保护的属性
DigitalInOut *	_pin [16]
int	_nc_mask
PlatformMutex	_mutex

BusInOut Hello World!

main.cpp                                                                                                                                                 导入到 Mbed IDE

/* mbed Example Program
 * Copyright (c) 2006-2014 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "mbed.h"
 
BusInOut pins(D0, D1, D2);
 
int main() {
    while(1) {
        pins.output();
        pins = 0x3;
        wait(1);
        pins.input();
        wait(1);
        if(pins == 0x6) {
            printf("Hello!\n");
        }
    }
}

相关内容

• DigitalInOut API 参考。