=======================================================================
Build Instructions:
====================
define the linux kernel source include file path LINUX_SRC
modify to meet your need.
define the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
# rmmod mt7601Usta
Build Instructions:
====================
1>tar
# tar -xvzf DPB_RT2870_Linux_STA_x.x.x.x.tgz
go to "./DPB_RT2870_Linux_STA_x.x.x.x" directory.2> Makefile Edit
set the "MODE = STA" in Makefile and chose the TARGET to Linux by set "TARGET = LINUX"define the linux kernel source include file path LINUX_SRC
modify to meet your need.
3> os/linux/config.mk Edit
define the GCC and LD of the target machinedefine the compiler flags CFLAGS
modify to meet your need.
** Build for being controlled by NetworkManager or wpa_supplicant wext functions
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'.
=> #>cd wpa_supplicant-x.x
=> #>./wpa_supplicant -Dwext -ira0 -c wpa_supplicant.conf -d
** Build for being controlled by WpaSupplicant with Ralink Driver
Please set 'HAS_WPA_SUPPLICANT=y' and 'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=n'.
=> #>cd wpa_supplicant-0.5.7
=> #>./wpa_supplicant -Dralink -ira0 -c wpa_supplicant.conf -d
备注 :
'HAS_WPA_SUPPLICANT=y'
'HAS_NATIVE_WPA_SUPPLICANT_SUPPORT=y'
4>compile driver source code
# make
5> /etc config
$cp RT2870STA.dat /etc/Wireless/RT2870STA/RT2870STA.dat
备注:若没有此路径,就先创建再拷贝
6> load driver
go to "os/linux/" directory.
# insmod mt7601Usta.ko
7> unload driver
# ifconfig ra0 down# rmmod mt7601Usta