esp_802.11_tx demo

/* Simple WiFi Example

   This example code is in the Public Domain (or CC0 licensed, at your option.)

   Unless required by applicable law or agreed to in writing, this
   software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
   CONDITIONS OF ANY KIND, either express or implied.
*/
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/event_groups.h"
#include "rom/ets_sys.h"
#include "esp_wifi.h"
#include "esp_event_loop.h"
#include "esp_log.h"
#include "nvs_flash.h"

/* The examples use simple WiFi configuration that you can set via
   'make menuconfig'.

   If you'd rather not, just change the below entries to strings with
   the config you want - ie #define EXAMPLE_WIFI_SSID "mywifissid"
*/
// #define EXAMPLE_ESP_WIFI_MODE_AP   CONFIG_ESP_WIFI_MODE_AP //TRUE:AP FALSE:STA
#define EXAMPLE_ESP_WIFI_SSID      "sunluxin_ap"
#define EXAMPLE_ESP_WIFI_PASS      "1234567890"
#define EXAMPLE_MAX_STA_CONN       4

/* FreeRTOS event group to signal when we are connected*/
static EventGroupHandle_t wifi_event_group;

/* The event group allows multiple bits for each event,
   but we only care about one event - are we connected
   to the AP with an IP? */
const int WIFI_CONNECTED_BIT = BIT0;

static const char *TAG = "simple wifi";

void send_pkt_test(void* pData);

#define AMSDU_LEN   (81)
uint8_t amsdu_hdr[50] = {
    0xec, 0xfa, 0xbc, 0x1d, 0x33, 0x2e,  // MSDU DA
    0xF0, 0x1F, 0xAF, 0x15, 0x59, 0x02,  // MSDU SA
    0x04, 0x66,//0x04, 0x63,  // MSUD length
    0xAA, 0xAA, 0x03, 0x00, 0x00, 0x00, 0x08, 0x00, // 802.2 LLC header
    0x45, 0x00, 0x05, 0xDA, 0x5A, 0xC7, 0x00, 0x