Terminator快捷键

linux下的终端软件还是很多的，今天发现了一个比较好用的，叫做Terminator，可以实现比如像窗口分割等比较实用的功能，以后再也不用用Crtl+Alt+上下左右来看不同的terminal。下面是自己将Terminator的快捷键帮助稍微翻译了一下，没能全部给出，也是自己实在没弄明白，其实常用的明白就好，不一定都能用得到。

The following keybindings can be used to control Terminator:

//第一部份：关于在同一个标签内的操作
Ctrl+Shift+O
Split terminals Horizontally.    //水平分割终端

Ctrl+Shift+E
Split terminals Vertically.    //垂直分割终端

Ctrl+Shift+Right
Move parent dragbar Right.    //在垂直分割的终端中将分割条向右移动

Ctrl+Shift+Left
Move parent dragbar Left.    //在垂直分割的终端中将分割条向左移动

Ctrl+Shift+Up
Move parent dragbar Up.        //在水平分割的终端中将分割条向上移动

Ctrl+Shift+Down
Move parent dragbar Down.    //在水平分割的终端中将分割条向下移动

Ctrl+Shift+S
Hide/Show Scrollbar.        //隐藏/显示滚动条

Ctrl+Shift+F
Search within terminal scrollback    //搜索

Ctrl+Shift+N or Ctrl+Tab
Move to next terminal within the same tab, use Ctrl+PageDown to move to the next tab. If cycle_term_tab is False, cycle within the same tab will be disabled            //Crtl+Tab   移动到下一个终端

Ctrl+Shift+P or Ctrl+Shift+Tab
Move to previous terminal within the same tab, use Ctrl+PageUp to move to the previous tab. If cycle_term_tab is False, cycle within the same tab will be disabled          //Crtl+Shift+Tab 移动到之前的一个终端

Alt+Up
Move to the terminal above the current one.    //移动到上面的终端

Alt+Down
Move to the terminal below the current one.    //移动到下面的终端

Alt+Left
Move to the terminal left of the current one.    //移动到左边的终端

Alt+Right
Move to the terminal right of the current one.    //移动到右边的终端

Ctrl+Shift+C
Copy selected text to clipboard            //复制选中的内容到剪贴板

Ctrl+Shift+V
Paste clipboard text                //粘贴剪贴板的内容到此处

Ctrl+Shift+W
Close the current terminal.            //关闭当前终端

Ctrl+Shift+Q
Quits Terminator                //退出当前窗口，当前窗口的所有终端都将被关闭

Ctrl+Shift+X
Toggle between showing all terminals and only showing the current one (maximise).    //只显示当前终端和显示所有终端的转换开关

Ctrl+Shift+Z
Toggle between showing all terminals and only showing a  version of the current one (zoom).    //与Crtl+Shift+X的功能基本一样，只是转换后的当前终端文字等大小不一样

//第二部份：有关各个标签之间的操作
Ctrl+Shift+T    
Open new tab    //打开一个新的标签

Ctrl+PageDown    
Move to next Tab    //移动到下一个标签

Ctrl+PageUp
Move to previous Tab    //移动到上一个标签

Ctrl+Shift+PageDown
Swap tab position with next Tab       //没懂这个

Ctrl+Shift+PageUp
Swap tab position with previous Tab    //没懂这个

Ctrl+Plus (+)
Increase font size. Note: this may require you to press shift, depending on your keyboard    //增大字体

Ctrl+Minus (-)
Decrease font size. Note: this may require you to press shift, depending on your keyboard    //减小字体

Ctrl+Zero (0)
Restore font size to original setting.        //恢复字体到原始大小

F11
Toggle fullscreen    //全屏开关

Ctrl+Shift+R
Reset terminal state    //重置终端状态（未懂）

Ctrl+Shift+G
Reset terminal state and clear window    //重置终端状态并clear屏幕

Super+g
Group all terminals so that any input sent to one of them, goes to all of them.       //绑定所有的终端，以便向一个输入能够输入到所有的终端

Super+Shift+G
Remove grouping from all terminals.    //解除绑定

Super+t
Group all terminals in the current tab so input sent to one of them, goes to all terminals in the current tab.    //绑定当前标签的所有终端

Super+Shift+T
Remove grouping from all terminals in the current tab.    //解除绑定

Ctrl+Shift+I
Open a new window (note: unlike in previous releases, this window is part of the same Terminator process)    //打开一个窗口，但是有点像继承了父窗口

Super+i
Spawn a new Terminator process    //这个跟上一个的主要区别还没弄懂

 
Drag and Drop
The layout can be modified by moving terminals with Drag and Drop. To start dragging a terminal, click and hold on its titlebar. Alternatively, 　　hold down Ctrl, click and hold the right mouse button. Then, **Release Ctrl**. You can now drag the terminal to the point in the layout you wou　　 ld like it to be. The zone where the terminal would be inserted will be highlighted.    //用来改变窗口布局的，另外我觉得这儿是鼠标左键