The following keybindings can be used to control Terminator:
//第一部份:关于在同一个标签内的操作
Ctrl+Shift+O
Split terminals Horizontally. //水平分割终端
Ctrl+Shift+E
Split terminals Vertically. //垂直分割终端
Ctrl+Shift+Right
Move parent dragbar Right. //在垂直分割的终端中将分割条向右移动
Ctrl+Shift+Left
Move parent dragbar Left. //在垂直分割的终端中将分割条向左移动
Ctrl+Shift+Up
Move parent dragbar Up. //在水平分割的终端中将分割条向上移动
Ctrl+Shift+Down
Move parent dragbar Down. //在水平分割的终端中将分割条向下移动
Ctrl+Shift+S
Hide/Show Scrollbar. //隐藏/显示滚动条
Ctrl+Shift+F
Search within terminal scrollback //搜索
Ctrl+Shift+N or Ctrl+Tab
Move to next terminal within the same tab, use Ctrl+PageDown to move to the next tab. If cycle_term_tab is False, cycle within the same tab will be disabled //Crtl+Tab 移动到下一个终端
Ctrl+Shift+P or Ctrl+Shift+Tab
Move to previous terminal within the same tab, use Ctrl+PageUp to move to the previous tab. If cycle_term_tab is False, cycle within the same tab will be disabled //Crtl+Shift+Tab 移动到之前的一个终端
Alt+Up
Move to the terminal above the current one. //移动到上面的终端
Alt+Down
Move to the terminal below the current one. //移动到下面的终端
Alt+Left
Move to the terminal left of the current one. //移动到左边的终端
Alt+Right
Move to the terminal right of the current one. //移动到右边的终端
Ctrl+Shift+C
Copy selected text to clipboard //复制选中的内容到剪贴板
Ctrl+Shift+V
Paste clipboard text //粘贴剪贴板的内容到此处
Ctrl+Shift+W
Close the current terminal. //关闭当前终端
Ctrl+Shift+Q
Quits Terminator //退出当前窗口,当前窗口的所有终端都将被关闭
Ctrl+Shift+X
Toggle between showing all terminals and only showing the current one (maximise). //只显示当前终端和显示所有终端的转换开关
Ctrl+Shift+Z
Toggle between showing all terminals and only showing a version of the current one (zoom). //与Crtl+Shift+X的功能基本一样,只是转换后的当前终端文字等大小不一样
//第二部份:有关各个标签之间的操作
Ctrl+Shift+T
Open new tab //打开一个新的标签
Ctrl+PageDown
Move to next Tab //移动到下一个标签
Ctrl+PageUp
Move to previous Tab //移动到上一个标签
Ctrl+Shift+PageDown
Swap tab position with next Tab //没懂这个
Ctrl+Shift+PageUp
Swap tab position with previous Tab //没懂这个
Ctrl+Plus (+)
Increase font size. Note: this may require you to press shift, depending on your keyboard //增大字体
Ctrl+Minus (-)
Decrease font size. Note: this may require you to press shift, depending on your keyboard //减小字体
Ctrl+Zero (0)
Restore font size to original setting. //恢复字体到原始大小
F11
Toggle fullscreen //全屏开关
Ctrl+Shift+R
Reset terminal state //重置终端状态(未懂)
Ctrl+Shift+G
Reset terminal state and clear window //重置终端状态并clear屏幕
Super+g
Group all terminals so that any input sent to one of them, goes to all of them. //绑定所有的终端,以便向一个输入能够输入到所有的终端
Super+Shift+G
Remove grouping from all terminals. //解除绑定
Super+t
Group all terminals in the current tab so input sent to one of them, goes to all terminals in the current tab. //绑定当前标签的所有终端
Super+Shift+T
Remove grouping from all terminals in the current tab. //解除绑定
Ctrl+Shift+I
Open a new window (note: unlike in previous releases, this window is part of the same Terminator process) //打开一个窗口,但是有点像继承了父窗口
Super+i
Spawn a new Terminator process //这个跟上一个的主要区别还没弄懂
Drag and Drop
The layout can be modified by moving terminals with Drag and Drop. To start dragging a terminal, click and hold on its titlebar. Alternatively, hold down Ctrl, click and hold the right mouse button. Then, **Release Ctrl**. You can now drag the terminal to the point in the layout you wou ld like it to be. The zone where the terminal would be inserted will be highlighted. //用来改变窗口布局的,另外我觉得这儿是鼠标左键
terminator快捷键
最新推荐文章于 2024-04-18 22:31:15 发布