STM32—USART

前言：

最近在调试STM32L152芯片的USART配置程序，实现STM32串口打印功能，本文总结下STM32L152芯片USART的使用方法。

硬件平台：STM32L152

软件平台：keil v5+cubeMX

函数库：HAL库

1：usart初始化

UART_HandleTypeDef huart3;
uint8_t rxbuf;

void MX_USART3_UART_Init(void)
{
  huart3.Instance = USART3;
  huart3.Init.BaudRate = 115200;
  huart3.Init.WordLength = UART_WORDLENGTH_8B;
  huart3.Init.StopBits = UART_STOPBITS_1;
  huart3.Init.Parity = UART_PARITY_NONE;
  huart3.Init.Mode = UART_MODE_TX_RX;
  huart3.Init.HwFlowCtl = UART_HWCONTROL_NONE;
  huart3.Init.OverSampling = UART_OVERSAMPLING_16;
 HAL_UART_Init(&huart3);
}

//串口gpio初始化

void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{
   GPIO_InitTypeDef GPIO_InitStruct;
  if(huart->Instance==USART3)
  {

    /* Peripheral clock enable */
    __HAL_RCC_USART3_CLK_ENABLE();