看到关于usb inrush current test的进程报告。将有关知识补习一下;
一 .硬件设备:
1. Oscilloscope
2. SQiDD board
3. N2783A current probe
二.关于inrush current
搜获一些资料,http://www.testusb.com/inrush_issue.htm
USB 2.0 Specification, Section 7.2.4.1
The purpose of the test is to ensure that the current consumed due to bulk capacitance and peripheral startup does not cause a voltage drop below valid levels that causes other devices to drop out. For this measurement a current probe, scope and Inrush Current Test Fixture is needed. The scope should have a record time of 100ms at 1 Mega sample per s