switch> 用户模式
switch>enable 进入特权模式
password: 输入特权模式密码
switch# 特权模式
switch#show version 查看当前版本信息
switch#show ip interface brief 查看交换机上有哪些接口,以及总体的配置信息和状态
switch#ping x.x.x.x (ip 地址)
switch#show running-config 查看当前(内存中)配置
switch#show startup-config 查看启动(硬盘中)配置
switch#copy running-config startup-config 将当前配置保存到启动配置中
switch#write 等同于以上命令
switch#show interface f0/1 查看f0/1接口
switch#config terminal 进入全局/配置模式
switch(config)#hostname aptech 将交换机名字改为aptech
switch(config)#enable password xxx(密码) 配置明文密码
switch(config)#no enable password xxx(密码) 删除明文密码
switch(config)#enable secret xxx(密码) 配置加密密码
switch(config)#no enable secret xxx(密码) 配置加密密码
switch(config)#interface ethernet 0 进入0号以太网接口
switch(config)#interface ethernet 0/1 进入0号插槽的1号以太网接口(10M)
switch(config)#interface fastethernet 0/1 进入0号插槽的1号快速以太网接口(100M)
switch(config)#interface serial 0 进入0号串型接口(以前用,现在很少用)
switch(config)#interface serial 0/1 进入0号插槽的1号串型接口
switch(config)#line console 0 进入到console接口
switch(config-line)#已经在console接口
switch(config-line)#password xxx(明文密码) 配置console口密码
switch(config-line)#no password xxx(明文密码) 去除console口密码
switch(config)#line vty 0 15 进入 0-15 号telnet会话
switch(config-line)#已经在vty线路了
switch(config-line)#password xxx(明文密码) 配置vty口密码
switch(config-line)#no password xxx(明文密码) 去除vty口密码
switch(config-line)#login 对telnet密码做验证
switch(config-line)#no login 不对telnet密码做验证
switch(config)#interface vlan 1 进入虚拟局域网接口1
switch(config-if)#已经在该接口模式
switch(config-if)#ip address x.x.x.x(ip地址) 255.255.255.0 (子网掩码)
switch(config-if)#no shutdown 打开当前端口
switch(config-if)#shutdown 关闭当前端口
switch(config-if)#clock rate 64000 (配置时钟,只需要在串行接口配置即可,以太网接口不用)
switch(config-if)#end 退出到特权模式