matlab飞行数据仿真,基于MATLAB的飞行仿真

收稿日期: 2005 - 05 - 15 　　第 23卷 　第 06期 计 　算 　机 　仿 　真 2006年 06月 　　 文章编号: 1006 - 9348 (2006) 06 - 0057 - 05 基于 MATLAB的飞行仿真 张镭 ,姜洪洲 ,齐潘国 ,李洪人 (哈尔滨工业大学电液伺服仿真及试验系统研究所 ,黑龙江 哈尔滨 150001) 摘要:该文介绍了一种小型飞机飞行模拟器飞行仿真模型的开发过程。建立了非线性的动力学方程和起落架模型 ,采用插值方法生成气动系数 , 利用 SimulinkTM 中航空工具箱构建环境模型 , 使用 StateflowTM 表述逻辑关系。气动数据来源于DATCOM。较为完整的模型 ,使得仿真整个飞行的过程 ,滑跑 ,起飞 ,巡航 ,降落得以实现。进行了飞机起飞和降落阶段的仿真 ,结果表明模型可用。非线性的数学模型能够比较真实地反映飞机的实际特性。仿真模型开发的成功为模拟器的建立打下了基础。 关键词:飞行仿真 ;航空工具箱;起落架模型;气动系数生成;起飞;降落 中图分类号 : TP391. 9　　文献标识码: A Flight Simulation Based on M ATLAB ZHANG Lei, J IANG Hong - zhou,Q I Pan - guo,L IHong - ren (Fluid Power Research Center, Harbin Institute of Technology, Harbin Heilongjiang 150001, China) ABSTRACT: This paper describes the development of a flightmodel for a new style light plane flight simulator. A non - linear dynamic model, a landing gear model and an aerodynam ic table lookup system have been developed to improve the capabilities of the flight simulator. The environment model is built by utilizing the Aerospace toolbox in SimulinkTM; the logical relations are described by the StateflowTM and the source of aerodynamic data is DATCOM. Comparative integrated model carries out the simulation of taxi, takeoff, cruising, and landing. The simulated takeoff and landing test proves the model to be usable. The nonlinearmodel almost accurately represents the actual flight characteristics of the airplane. The flight model serves as a foundation for future simulator projects. KEYWO RDS: Flight simulation; Aer