楼主要学会用MATLAB的help命令啊: help modulate MODULATE Signal modulation for communications simulations. Y = MODULATE(X,Fc,Fs,METHOD,OPT) modulates the message signal X with a carrier frequency Fc and sampling frequency Fs, using the modulation scheme in METHOD. OPT is an extra sometimes optional parameter whose purpose depends on the modulation scheme you choose. Fs must satisfy Fs > 2*Fc + BW, where BW is the bandwidth of the modulated signal. METHOD MODULATION SCHEME 'am', Amplitude modulation, double side-band, suppressed carrier 'amdsb-sc' OPT not used. 'amdsb-tc' Amplitude modulation, double side-band, transmitted carrier OPT is a scalar which is subtracted from X prior to multiplication by the carrier cosine. It defaults to min(min(X)) so the offset message signal is positive and has a minimum value of zero. 'amssb' Amplitude modulation, single side-band OPT not used. 'fm' Frequency modulation OPT is a scalar which specifies the constant of frequency modulation kf. kf = (Fc/Fs)*2*pi/max(max(abs(X))) by default for a maximum frequency excursion of Fc Hertz. 'pm' Phase modulation OPT is a scalar which specifies the constant of phase modulation kp. kp = pi/max(max(abs(x))) by default for a maximum phase excursion of +/-pi radians. 'pwm' Pulse width modulation If you let OPT = 'centered', the pulses are centered on the carrier period rather than being "left justified". 'ppm' Pulse position modulation OPT is a scalar between 0 and 1 which specifies the pulse width in fractions of the carrier period. It defaults to .1. 'qam' Quadrature amplitude modulation OPT is a matrix the same size as X which is modulated in quadrature with X. If X is a matrix, its columns are modulated. [Y,T] = MODULATE(...) returns a time vector the same length as Y.
matlab怎么产生调频信号,MATLAB关于产生线性调频信号的问题.请阿里巴巴生意经的高手们帮忙看下...
最新推荐文章于 2024-02-01 10:31:52 发布