s7816pad转换的c语言程序,AT24C128SC-09AT

Features

•

•

•

•

•

•

•

•

•

Low-voltage and Standard-voltage Operation, V

CC

= 2.7V to 5.5V

Internally Organized 16,384 x 8 and 32,768 x 8

2-wire Serial Interface

Schmitt Trigger, Filtered Inputs for Noise Suppression

Bi-directional Data Transfer Protocol

1 MHz (5V) and 400 kHz (2.7V) Compatibility

64-byte Page Write Mode (Partial Page Writes Allowed)

Self-timed Write Cycle (5 ms Typical)

High Reliability

– Endurance: 1 Million Write Cycles

– Data Retention: 40 Years

– ESD Protection: > 4000V

Description

The AT24C128SC/256SC provides 131,072/262,144 bits of serial electrically erasable

and programmable read only memory (EEPROM) organized as 16,384/32,768 words

of 8 bits each. The devices are optimized for use in smart card applications where low-

power and low-voltage operation may be essential. The devices are available in sev-

eral standard ISO 7816 smart card modules (see Ordering Information). All devices

are functionally equivalent to Atmel Serial EEPROM products offered in standard IC

packages (PDIP, SOIC, TSSOP, dBGA), with the exception of the slave address and

Write Protect functions which are not required for smart card applications.

Table 1.

Pin Configurations

Pad Name

VCC

GND

SCL

SDA

NC

Description

Power Supply Voltage

Ground

Serial Clock Input

Serial Data Input/Output

No Connect

ISO Module Contact

C1

C5

C3

C7

C2, C4, C6, C8

Two-wire Serial

EEPROM Smart

Card Modules

128K (16,384 x 8)

256 (32,768 x 8)

AT24C128SC

AT24C256SC

Figure 1.

Card Module Contact

VCC

NC

1661B–SEEPR–04/04

1