Verilog (二) multiplexer and decoder

1  mutiplexer 数据选择器

1)  one-bit wide 2-1 mux

wire  dout  = sel? din1 : din0;  // conditional continuous and wire assignment

2)  4-1 mux

 1 module  mux4_1(sel, din0, din1, din2, din3, dout);
 2   input  [1:0]  sel;
 3   input    din0, din1, din2, din3;
 4   output  dout;
 5   reg   dout;
 6 
 7 always @ (sel or din0 or din1 or din2 or din3)
 8 begin
 9   case(sel)
10     2'b00:  dout = din0;
11     2'b01:  dout = din1;
12     2'b10:  dout = din2;
13     2'b11:  dout = din3;
14     default:  dout = din0;
15   endcase
16 end
17 
18 endmodule

3)  two-bit wide 8-1 mux (case statement)

sel	din7	din6	din5	din4	din3	din2	din1	din0	dout
000	XX	XX	XX	XX	XX	XX	XX	DD	din0
001	XX	XX	XX	XX	XX	XX	DD	XX	din1
010	XX	XX	XX	XX	XX	DD	XX	XX	din2
011	XX	XX	XX	XX	DD	XX	XX	XX	din3
100	XX	XX	XX	DD	XX	XX	XX	XX	din4
101	XX	XX	DD	XX	XX	XX	XX	XX	din5
110	XX	DD	XX	XX	XX	XX	XX	XX	din6
111	DD	XX	XX	XX	XX	XX	XX	XX	din7

 

2  decoder 解码器/译码器

    n 个输入  =>  2ⁿ 个输出

1)  3-8 binary decoder

module  decoder3_8(A, Y);
  input    [2:0]  A;
  output  [7:0]  Y;
  reg    [7:0]  Y;

always @ (A)
  case (A)
    0:  Y = 8'b00000001;
    1:  Y = 8'b00000010;
    2:  Y = 8'b00000100;
    3:  Y = 8'b00001000;
    4:  Y = 8'b00010000;
    5:  Y = 8'b00100000;
    6:  Y = 8'b01000000;
    7:  Y = 8'b10000000;
    default:  Y = 8'b0;
  endcase

endmodule

decoder3_8

2)  3-6 binary decoder with enable

module  decoder3_6(A, EN, Y);
  input    EN;
  input    [2:0]  A;
  output  [5:0]  Y;
  reg    [5:0]  Y;

always @ (EN or A)
  case ({EN, A})
    4'b1000:  Y = 6'b000001;
    4'b1001:  Y = 6'b000010;
    4'b1010:  Y = 6'b000100;
    4'b1011:  Y = 6'b001000;
    4'b1100:  Y = 6'b010001;
    4'b1101:  Y = 6'b100000;
    default:  Y = 6'b0;
  endcase

endmodule

decoder3_6_en

 

转载于:https://www.cnblogs.com/xinxue/p/5249252.html