linux下无法识别zynq,使用zynq 移植linux使用DP83822 可以识别但是无法ping通

您好，是的，我帮您咨询了美国工程师， 他的回复如下：

第一，确保供电电压的去耦电容已经接上，参考Figure36 的"power connection"部分。 其次就是 0x0002和 0x0003回读寄存器值没问题， MDC pin不需要上拉。 只有MIDO引脚需要上拉。

第二，通过0X0001读的寄存器值看起来自动协商没有完成，所以需要确认下 link partner是否支持自动协商，是否已经enable此功能？ 另外，这几个寄存器x0004, 0x0005 和0x0010读取的值是什么？

Please confirm that the power supply filtering caps are present in the schematic as shown in "Figure 36. Power Connections". Also although it looks like you are able to access registers with no problem because 0x0002 and 0x0003 reads are correct, the MDC pin does not require a pullup resistor, only MDIO does.

Based on your screenshot of register 0x0001 contents it looks like the auto-negotiation process was not completed, can you confirm the link partner is also capable of auto-negotiation and is set for this? Also please send me the read back value of register 0x0004, 0x0005 and 0x0010.

若该回复解决了您的问题，请点击“确认此为答案”，谢谢。