OSPF同区域（改接口开销、修改DR优先级值）

拓扑图:

配置命令

实验要求：
1.AR1和AR2能够进行路由的学习
2.指定R1作为DR
3.要求R1学习的2.2.2.2路由的开销要为20

[R1]int LoopBack 0
[R1-LoopBack0]ip add 1.1.1.1 32
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 10.1.12.1 24
[R2]int LoopBack 0
[R2-LoopBack0]ip add 2.2.2.2 32
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip ad 10.1.12.2 24

[R1]ospf 1 router-id  1.1.1.1
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]network  10.1.12.1  0.0.0.0
[R1-ospf-1-area-0.0.0.0]network  1.1.1.1 0.0.0.0	
[R2]ospf 1 router-id  2.2.2.2
[R2-ospf-1]a 0
[R2-ospf-1-area-0.0.0.0]network  10.1.12.2 0.0.0.0
[R2-ospf-1-area-0.0.0.0]ne 2.2.2.2 0.0.0.0

//查看配置是否正确
[R1]dis ospf peer brief 

	 OSPF Process 1 with Router ID 1.1.1.1
		  Peer Statistic Information
 ----------------------------------------------------------------------------
 Area Id          Interface                        Neighbor id      State    
 0.0.0.0          GigabitEthernet0/0/0             2.2.2.2          Full        
 ----------------------------------------------------------------------------
[R1]dis ip routing-table 
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
         Destinations : 9        Routes : 9        

Destination/Mask  Proto  Pre  Cost  Flags  NextHop     Interface

   1.1.1.1/32     Direct   0    0     D    127.0.0.1     LoopBack0
   2.2.2.2/32     OSPF   10   1     D    10.1.12.2   GigabitEthernet 0/0/0

//改接口开销：
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ospf cost 20
//修改DR优先级值：
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ospf dr-priority 100