DCM模块配置详解 - 续5
- 一、容器DcmDspSession
- 二、容器DcmGeneral
-
- 2.1 参数DcmDDDIDStorageBlockIdRef
- 2.2 参数DcmDtrDataProvisionViaDemEnabled
- 2.3 参数DcmDtrDataProvisionViaDemEnabled
- 2.4 参数DcmDemApiVersion
- 2.5 参数DcmDevErrorDetect
- 2.6 参数DcmDspDataDefaultEndianness
- 2.7 参数DcmFinalResponseToFblEnabled
- 2.8 参数DcmKeepAliveTime
- 2.9 参数DcmKeepAliveTimeStartOnFunc3E80
- 2.10 参数DcmMainFunctionWorkerTaskTime
- 2.11 参数DcmRequestManufacturerNotificationEnabled
- 2.12 参数DcmRequestSupplierNotificationEnabled
- 2.13 参数DcmResetToFblAfterSessionFinalResponseEnabled
- 2.14 参数DcmRespondAllRequest
- 2.15 参数DcmSecurityLevelChangeNotificationEnabled
- 2.16 参数DcmSenderReceiverPRPortsEnabled
- 2.17 参数DcmStateRecoveryAfterResetEnabled
- 2.18 参数DcmSuppressResponseOnCanTpFuncMixedAddrRequests
- 总结
一、容器DcmDspSession
此容器包括Dcm应支持的所有诊断会话。
1.1 参数DcmSessionTimerS3Enabled
指定是否支持S3计时器。
1 - 勾选:或者缺失(默认状态), S3计时器按照ISO 14229-2
进行处理。
2 - 不勾选:Dcm将永远不
会在非默认
会话中启动
S3计时器。在这种情况下,S3超时
将永远不会
发生。
1.2 子容器DcmDspSessionRow
单个会话级别
控制配置参数。
1.2.1 参数DcmDspSessionForBoot
此参数定义具体诊断会话
是否允许
跳转到Boot
。如果此诊断会话
不允许跳转到Bootloader