时差 频差 双星定位 matlab,双星时差频差无源定位系统定位算法工程指标分析

文章编号 :1001 - 893X(2011)07 - 0034 - 04 双星时差频差无源定位系统定位算法工程指标分析Ξ王勤果 ,龙  宁 (中国西南电子技术研究所 ,成都 610036) 摘  要 :通过计算时差、频差测量精度 ,以及卫星运动引起的时差、频差变化率 ,提出双星时差频差无源定位系统的信号最佳采样时间为 10~100 ms。进一步推导了工程可实现的定位精度 ,仿真结果表明双星系统工程可实现的定位精度约为 1~3 km。研究和结论对双星定位系统定位精度指标的论证与分解具有借鉴意义。 关键词 :双星定位 ;时差 ;频差 ;工程实现 ;信号采样时间 ;定位精度 中图分类号 :TN967. 1   文献标识码 :A   doi :10. 3969/ j. issn. 1001 - 893x. 2011. 07. 007 Engineering Index Analysis of Localization Algorithm for Dual2satellite Passive Geolocation Using TDOA and FDOA WANG Qin2guo ,LONG Ning(Southwest China Institute of Electronic Technology , Chengdu 610036 , China)Abstract :By computing the measurement precision of TDOA(Time Difference of Arrival) and FDOA(Frequency Difference of Arrival) , TDOA and FDOA′ s change rate caused by satellite′ s movement ,this paper puts forward that the best signal sampling time is 10~100 ms in Dualsatellite Passive Geolocation System using TDOA and FDOA. Further more , localization precision of engineering realization is deduced. Simulation results show that localization precision is about 1~3 km. The research and conclusion can provide reference for demonstration and analysis of localization precision index of dual2satellite passive geolocation system. Key words :dual2satellite geolocation ; TDOA;FDOA;engineering realization ; signal sampling time ; localization precision 1  引  言 双星时差频差无源定位系统是利用两颗卫星通过测量地面同一个辐射源的时差和频差信息来实现对信号的精确定位 ,具有定位精度高、覆盖区域大、实时性好、对卫星的姿态要求低、系统设备量小等优点。国外在 20 世纪 80 年代初就报道了时差频差定位相关技术的研究成果 ,Stein S 在 1981 年给出了时差和频差的估计精

  • 0
    点赞
  • 1
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值