Arduino IDE环境下NodeMCU引脚定义

perseverance52

已于 2022-09-03 21:21:33 修改

阅读量3.5k

点赞数 2

文章标签： nodemcu引脚定义

于 2021-02-25 20:44:27 首次发布

本文为Perseverance52博主原创文章，未经博主允许，不得转载！

本文链接：https://blog.csdn.net/weixin_42880082/article/details/114106124

版权

Arduino 专栏收录该内容

118 篇文章 35 订阅

订阅专栏

Arduino IDE环境下NodeMCU引脚定义

🌿 在开发过程中，我们必须了解各GPIO在上层是怎么定义的，才能心中有数，合理调用IO口

⛳对照引脚功能图：

NodeMCU

📖定义头文件

#define PIN_WIRE_SDA (4)
#define PIN_WIRE_SCL (5)

static const uint8_t SDA = PIN_WIRE_SDA;
static const uint8_t SCL = PIN_WIRE_SCL;

#ifndef LED_BUILTIN
#define LED_BUILTIN 2
#endif
#define LED_BUILTIN_AUX 16

static const uint8_t D0   = 16;
static const uint8_t D1   = 5;
static const uint8_t D2   = 4;
static const uint8_t D3   = 0;
static const uint8_t D4   = 2;
static const uint8_t D5   = 14;
static const uint8_t D6   = 12;
static const uint8_t D7   = 13;
static const uint8_t D8   = 15;
static const uint8_t D9   = 3;
static const uint8_t D10  = 1;