SystemviewV3.3工具使用

工具下载

Systemview下载地址

移植

以不带操作系统的移植方式为例
移植源码位于：

工程加入以下文件：

错误解决方式

• keil下多重定义问题：

.\Objects\Hello World.axf: Error: L6200E: Symbol __stdout_name multiply defined (by C:\Keil_v5\ARM\ARMCC\Bin\..\lib\armlib\c_w.l(sys_io.o) and .\objects\segger_rtt_syscalls_keil.o).
.\Objects\Hello World.axf: Error: L6200E: Symbol __stderr_name multiply defined (by C:\Keil_v5\ARM\ARMCC\Bin\..\lib\armlib\c_w.l(sys_io.o) and .\objects\segger_rtt_syscalls_keil.o).
.\Objects\Hello World.axf: Error: L6200E: Symbol _sys_close multiply defined (by C:\Keil_v5\ARM\ARMCC\Bin\..\lib\armlib\c_w.l(sys_io.o) and .\objects\segger_rtt_syscalls_keil.o).
.\Objects\Hello World.axf: Error: L6200E: Symbol _sys_ensure multiply defined (by C:\Keil_v5\ARM\ARMCC\Bin\..\lib\armlib\c_w.l(sys_io.o) and .\objects\segger_rtt_syscalls_keil.o).
.\Objects\Hello World.axf: Error: L6200E: Symbol _sys_flen multiply defined (by C:\Keil_v5\ARM\ARMCC\Bin\..\lib\armlib\c_w.l(sys_io.o) and .\objects\segger_rtt_syscalls_keil.o).
.\Objects\Hello World.axf: Error: L6200E: Symbol _sys_istty multiply defined (by C:\Keil_v5\ARM\ARMCC\Bin\..\lib\armlib\c_w.l(sys_io.o) and .\objects\segger_rtt_syscalls_keil.o).
.\Objects\Hello World.axf: Error: L6200E: Symbol _sys_open multiply defined (by C:\Keil_v5\ARM\ARMCC\Bin\..\lib\armlib\c_w.l(sys_io.o) and .\objects\segger_rtt_syscalls_keil.o).
.\Objects\Hello World.axf: Error: L6200E: Symbol _sys_read multiply defined (by C:\Keil_v5\ARM\ARMCC\Bin\..\lib\armlib\c_w.l(sys_io.o) and .\objects\segger_rtt_syscalls_keil.o).
.\Objects\Hello World.axf: Error: L6200E: Symbol _sys_seek multiply defined (by C:\Keil_v5\ARM\ARMCC\Bin\..\lib\armlib\c_w.l(sys_io.o) and .\objects\segger_rtt_syscalls_keil.o).
.\Objects\Hello World.axf: Error: L6200E: Symbol _sys_write multiply defined (by C:\Keil_v5\ARM\ARMCC\Bin\..\lib\armlib\c_w.l(sys_io.o) and .\objects\segger_rtt_syscalls_keil.o).

Keil修改参考

• keil下编译文件不可用问题：
  
  确认修改文件类型，注意.s汇编文件和.h的头文件
  

使用方法

int main(void)
{
  /*硬件的初始化*/

  /*工具初始化并启动*/
  SEGGER_SYSVIEW_Conf();
  SEGGER_SYSVIEW_Start();

  while (1)
  {
    SEGGER_SYSVIEW_RecordEnterISR();
    HAL_Delay(1);
    SEGGER_SYSVIEW_RecordExitISR();
    SEGGER_SYSVIEW_Print("pSEGGER_SYSVIEW_Print");
  }
}