pixhawk在启动jmavsim时，启动不了

lcg@ubuntu:~/src/Firmware$ sudo make px4_sitl jmavsim
[1/1] cd /home/lcg/src/Firmware/build/…cg/src/Firmware/build/px4_sitl_default
SITL ARGS
sitl_bin: /home/lcg/src/Firmware/build/px4_sitl_default/bin/px4
debugger: none
program: jmavsim
model: none
src_path: /home/lcg/src/Firmware
build_path: /home/lcg/src/Firmware/build/px4_sitl_default
empty model, setting iris as default
SITL COMMAND: “/home/lcg/src/Firmware/build/px4_sitl_default/bin/px4” “/home/lcg/src/Firmware”/ROMFS/px4fmu_common -s etc/init.d-posix/rcS -t “/home/lcg/src/Firmware”/test_data
INFO [px4] Creating symlink /home/lcg/src/Firmware/ROMFS/px4fmu_common -> /home/lcg/src/Firmware/build/px4_sitl_default/tmp/rootfs/etc

---

| ___ \ \ \ / / / |
| |/ / \ V / / /| |
| __/ / \ / /| |
| | / /^\ \ ___ |
_| / / |_/

px4 starting.

INFO [px4] Calling startup script: /bin/sh etc/init.d-posix/rcS 0
SYS_AUTOSTART: curr: 0 -> new: 10016
BAT_N_CELLS: curr: 0 -> new: 3
CAL_ACC0_ID: curr: 0 -> new: 1376264
CAL_ACC1_ID: curr: 0 -> new: 1310728
CAL_ACC_PRIME: curr: 0 -> new: 1376264
CAL_GYRO0_ID: curr: 0 -> new: 2293768
CAL_GYRO_PRIME: curr: 0 -> new: 2293768
CAL_MAG0_ID: curr: 0 -> new: 196616
CAL_MAG_PRIME: curr: 0 -> new: 196616
COM_DISARM_LAND: curr: -1.0000 -> new: 0.1000
COM_OBL_ACT: curr: 0 -> new: 2
COM_OF_LOSS_T: curr: 0.0000 -> new: 5.0000
COM_RC_IN_MODE: curr: 0 -> new: 1
EKF2_ANGERR_INIT: curr: 0.1000 -> new: 0.0100
EKF2_GBIAS_INIT: curr: 0.1000 -> new: 0.0100
MC_PITCH_P: curr: 6.5000 -> new: 6.0000
MC_PITCHRATE_P: curr: 0.1500 -> new: 0.2000
Buildfile: /home/lcg/src/Firmware/Tools/jMAVSim/build.xml
MC_ROLL_P: curr: 6.5000 -> new: 6.0000
MC_ROLLRATE_P: curr: 0.1500 -> new: 0.2000
MPC_HOLD_MAX_Z: curr: 0.6000 -> new: 2.0000
MPC_Z_VEL_I: curr: 0.0200 -> new: 0.1500
MPC_Z_VEL_P: curr: 0.2000 -> new: 0.6000
MPC_XY_P: curr: 0.9500 -> new: 0.8000
MPC_XY_VEL_P: curr: 0.0900 -> new: 0.2000
MPC_XY_VEL_D: curr: 0.0100 -> new: 0.0160
MPC_JERK_MIN: curr: 8.0000 -> new: 10.0000
MPC_ACC_HOR_MAX: curr: 10.0000 -> new: 3.0000
NAV_ACC_RAD: curr: 10.0000 -> new: 2.0000
NAV_DLL_ACT: curr: 0 -> new: 2
RTL_DESCEND_ALT: curr: 30.0000 -> new: 5.0000
RTL_LAND_DELAY: curr: -1.0000 -> new: 5.0000
RTL_RETURN_ALT: curr: 60.0000 -> new: 30.0000
SDLOG_MODE: curr: 0 -> new: 1
SDLOG_PROFILE: curr: 3 -> new: 131
SDLOG_DIRS_MAX: curr: 0 -> new: 7
SENS_BOARD_X_OFF: curr: 0.0000 -> new: 0.0000
SENS_DPRES_OFF: curr: 0.0000 -> new: 0.0010

• RTL_DESCEND_ALT: curr: 5.0000 -> new: 10.0000
• RTL_LAND_DELAY: curr: 5.0000 -> new: 0.0000
  PWM_MAX: curr: 2000 -> new: 1950
  PWM_MIN: curr: 1000 -> new: 1075
  INFO [dataman] Unknown restart, data manager file ‘./dataman’ size is 11798680 bytes
  INFO [simulator] Waiting for simulator to connect on TCP port 4560

make_dirs:

compile:

create_run_jar:

copy_res:

BUILD SUCCESSFUL
Total time: 0 seconds
Options parsed, starting Sim.
Starting GUI…
3D [dev] 1.6.0-pre12-daily-experimental daily

libEGL warning: DRI2: failed to authenticate
com.jogamp.opengl.GLException: J3D-Renderer-1: createImpl ARB n/a but required, profile > GL2 requested (OpenGL >= 3.1). Requested: GLProfile[GL3bc/GL3bc.sw], current: 3.0 (Compat profile, compat[ES2], FBO, software) - 3.0 Mesa 18.0.5
at jogamp.opengl.x11.glx.X11GLXContext.createImpl(X11GLXContext.java:418)
at jogamp.opengl.GLContextImpl.makeCurrentWithinLock(GLContextImpl.java:759)
at jogamp.opengl.GLContextImpl.makeCurrent(GLContextImpl.java:642)
at jogamp.opengl.GLContextImpl.makeCurrent(GLContextImpl.java:580)
at javax.media.j3d.JoglPipeline$QueryCanvas.doQuery(JoglPipeline.java:8615)atjavax.media.j3d.JoglPipeline$QueryCanvas.access$100(JoglPipeline.java:8566)
at javax.media.j3d.JoglPipeline.createQueryContext(JoglPipeline.java:6562)
at javax.media.j3d.Canvas3D.createQueryContext(Canvas3D.java:4609)
at javax.media.j3d.Canvas3D.createQueryContext(Canvas3D.java:3606)
at javax.media.j3d.Renderer.doWork(Renderer.java:461)
at javax.media.j3d.J3dThread.run(J3dThread.java:271)

DefaultRenderingErrorListener.errorOccurred:
CONTEXT_CREATION_ERROR: Renderer: Error creating Canvas3D graphics context for queryProperties()
graphicsDevice = X11GraphicsDevice[screen=0]
canvas = me.drton.jmavsim.Visualizer3D$CustomCanvas3D[canvas0,0,0,0x0,invalid]
Exception in thread “main” java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at org.eclipse.jdt.internal.jarinjarloader.JarRsrcLoader.main(JarRsrcLoader.java:61)
Caused by: java.lang.IllegalStateException: Canvas3D: Non-recoverable graphics configuration error
at javax.media.j3d.Canvas3D.queryProperties(Canvas3D.java:3595)
at me.drton.jmavsim.Visualizer3D.createEnvironment(Visualizer3D.java:269)
at me.drton.jmavsim.Visualizer3D.(Visualizer3D.java:215)
at me.drton.jmavsim.Simulator.(Simulator.java:176)
at me.drton.jmavsim.Simulator.main(Simulator.java:895)
… 5 more
X11Util.Display: Shutdown (JVM shutdown: true, open (no close attempt): 1/1, reusable (open, marked uncloseable): 0, pending (open in creation order): 1)
X11Util: Open X11 Display Connections: 1
X11Util: Open[0]: NamedX11Display[:0, 0x7f1128021e20, refCount 1, unCloseable false]
解决办法：1、要打开3D加速
2、进入root模式，再执行make px4_sitl jmavsim