在UVM入门实验3中，实现了monitor、reference model与checker之间的通信时通过TLM端口或者TLM FIFO来完成，相较于之前的mainbox句柄连接，更加容易定制，也使得组件的独立性提高。
本次实验需要实现：
- 将产生
transaction并且发送至driver的generator组件，拆分为sequence与sequencer。 - 在拆分的基础上，实现底层的
squence。 - 完成
sequencer与driver的连接和通信工作。 - 构建顶层的
virtual sequencer。 - 将原有的
mcdf_base_test拆分为mcdf_base_virtual_sequence与mcdf_base_test，前者发挥产生序列的工作，后者至完成挂载 序列的工作。 - 将原有的
mcdf_data_consistence_base_test和macd_full_random_test继续拆分为对应的virtual sequence和轻量化的顶层test。
通过实验4可以将generator、driver与test的关系最终移植为sequence、sequencer、driver和test的关系。
1. driver与sequence的改建
移除原有在各个driver中的mailbox句柄，以及在do_driver()任务中使用mainbox句柄通信的方式，转而使用uvm_driver::seq_item_port进行通信，同时定义对应的uvm_sequencer。
//移除各个`driver`中的`mailbox`句柄
//mailbox #(reg_trans) req_mb;
//mailbox #(reg_trans) rsp_mb;
task do_drive();
reg_trans req, rsp;
@(posedge intf.rstn);
forever begin
seq_item_port.get_next_item(req);
this.reg_write(req);
void'($cast(rsp, req.clone()));
rsp.rsp = 1;
rsp.set_sequence_id(req.get_sequence_id());
seq_item_port.item_done(rsp);
end
endtask
class reg_sequencer extends uvm_sequencer #(reg_trans);
`uvm_component_utils(reg_sequencer)
function new (string name = "reg_sequencer", uvm_component parent);
super.new(name, parent);
endfunction
endclass: reg_sequencer
2. 底层sequence的提取
将原来在各个generator中发送transaction的任务，提取为各个对应的底层sequence。在各个agent中声明、创建对应的sequencer，并且将其与driver通过TLM port连接起来。
//extract chnl_data_sequence from the reg_generator
class reg_base_sequence extends uvm_sequence #(reg_trans);
rand bit[7:0] addr = -1;
rand bit[1:0] cmd = -1;
rand bit[31:0] data = -1;
constraint cstr{
soft addr == -1;
soft cmd == -1;
soft data == -1;
}
`uvm_object_utils_begin(reg_base_sequence)
`uvm_field_int(addr, UVM_ALL_ON)
`uvm_field_int(cmd, UVM_ALL_ON)
`uvm_field_int(data, UVM_ALL_ON)
`uvm_object_utils_end
`uvm_declare_p_sequencer(reg_sequencer)
function new (string name = "reg_base_sequence");
super.new(name);
endfunction
task body();
send_trans();
endtask
// generate transaction and put into local mailbox
task send_trans();
reg_trans req, rsp;
`uvm_do_with(req, {local::addr >= 0 -> addr == local::addr;
local::cmd >= 0 -> cmd == local::cmd;
local::data >= 0 -> data == local::data;
})
`uvm_info(get_type_name(), req.sprint(), UVM_HIGH)
get_response(rsp);
`uvm_info(get_type_name(), rsp.sprint(), UVM_HIGH)
if(req.cmd == `READ)
this.data = rsp.data;
assert(rsp.rsp)
else $error("[RSPERR] %0t error response received!", $time);
endtask
function void post_randomize();
string s;
s = {s, "AFTER RANDOMIZATION \n"};
s = {s, "=======================================\n"};
s = {s, "reg_base_sequence object content is as below: \n"};
s = {s, super.sprint()};
s = {s, "=======================================\n"};
`uvm_info(get_type_name(), s, UVM_HIGH)
endfunction
endclass: reg_base_sequence
class idle_reg_sequence extends reg_base_sequence;
constraint cstr{
addr == 0;
cmd == `IDLE;
data == 0;
}
`uvm_object_utils(idle_reg_sequence)
function new (string name = "idle_reg_sequence");
super.new(name);
endfunction
endclass: idle_reg_sequence
class write_reg_sequence extends reg_base_sequence;
constraint cstr{
cmd == `WRITE;
}
`uvm_object_utils(write_reg_sequence)
function new (string name = "write_reg_sequence");
super.new(name);
endfunction
endclass: write_reg_sequence
class read_reg_sequence extends reg_base_sequence;
constraint cstr{
cmd == `READ;
}
`uvm_object_utils(read_reg_sequence)
function new (string name = "read_reg_sequence");
super.new(name);
endfunction
endclass: read_reg_sequence
// register agent
class reg_agent extends uvm_agent;
reg_driver driver;
reg_monitor monitor;
// declare the sequencer
reg_sequencer sequencer;
local virtual reg_intf vif;
`uvm_component_utils(reg_agent)
function new(string name = "reg_agent", uvm_component parent);
super.new(name, parent);
endfunction
function void build_phase(uvm_phase phase);
super.build_phase(phase);
driver = reg_driver::type_id::create("driver", this);
monitor = reg_monitor::type_id::create("monitor", this);
// instantiate the sequencer
sequencer = reg_sequencer::type_id::create("sequencer", this);
endfunction
function void connect_phase(uvm_phase phase);
super.connect_phase(phase);
//connect the driver and the sequencer
driver.seq_item_port.connect(sequencer.seq_item_export);
endfunction
function void set_interface(virtual reg_intf vif);
this.vif = vif;
driver.set_interface(vif);
monitor.set_interface(vif);
endfunction
endclass
3. 移除generator的踪迹
在mcdf_base_test中移除generator的声明、创建以及和driver之间的连接。
class mcdf_base_test extends uvm_test;
//remove the generators' handle clarification
//chnl_generator chnl_gens[3];
//reg_generator reg_gen;
//fmt_generator fmt_gen;
mcdf_env env;
virtual chnl_intf ch0_vif ;
virtual chnl_intf ch1_vif ;
virtual chnl_intf ch2_vif ;
virtual reg_intf reg_vif ;
virtual arb_intf arb_vif ;
virtual fmt_intf fmt_vif ;
virtual mcdf_intf mcdf_vif;
`uvm_component_utils(mcdf_base_test)
function new(string name = "mcdf_base_test", uvm_component parent);
super.new(name, parent);
endfunction
function void build_phase(uvm_phase phase);
super.build_phase(phase);
// get virtual interface from top TB
if(!uvm_config_db#(virtual chnl_intf)::get(this,"","ch0_vif", ch0_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
if(!uvm_config_db#(virtual chnl_intf)::get(this,"","ch1_vif", ch1_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
if(!uvm_config_db#(virtual chnl_intf)::get(this,"","ch2_vif", ch2_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
if(!uvm_config_db#(virtual reg_intf)::get(this,"","reg_vif", reg_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
if(!uvm_config_db#(virtual arb_intf)::get(this,"","arb_vif", arb_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
if(!uvm_config_db#(virtual fmt_intf)::get(this,"","fmt_vif", fmt_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
if(!uvm_config_db#(virtual mcdf_intf)::get(this,"","mcdf_vif", mcdf_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
this.env = mcdf_env::type_id::create("env", this);
//remove the generators' instantiation
//foreach(this.chnl_gens[i]) begin
// this.chnl_gens[i] = chnl_generator::type_id::create($sformatf("chnl_gens[%0d]",i), this);
//end
//this.reg_gen = reg_generator::type_id::create("reg_gen", this);
//this.fmt_gen = fmt_generator::type_id::create("fmt_gen", this);
endfunction
function void connect_phase(uvm_phase phase);
super.connect_phase(phase);
// After get virtual interface from config_db, and then set them to
// child components
this.set_interface(ch0_vif, ch1_vif, ch2_vif, reg_vif, arb_vif, fmt_vif, mcdf_vif);
// remove the cross-hierarchy handle connection between drivers
//and generators since they are now connected inside the agents by the
//TLM ports connection between the sequencer and the driver
/*
foreach(this.chnl_gens[i]) begin
this.env.chnl_agts[i].driver.req_mb = this.chnl_gens[i].req_mb;
this.env.chnl_agts[i].driver.rsp_mb = this.chnl_gens[i].rsp_mb;
end
this.env.reg_agt.driver.req_mb = this.reg_gen.req_mb;
this.env.reg_agt.driver.rsp_mb = this.reg_gen.rsp_mb;
this.env.fmt_agt.driver.req_mb = this.fmt_gen.req_mb;
this.env.fmt_agt.driver.rsp_mb = this.fmt_gen.rsp_mb;
*/
endfunction
function void end_of_elaboration_phase(uvm_phase phase);
super.end_of_elaboration_phase(phase);
uvm_root::get().set_report_verbosity_level_hier(UVM_HIGH);
uvm_root::get().set_report_max_quit_count(1);
uvm_root::get().set_timeout(10ms);
endfunction
task run_phase(uvm_phase phase);
// NOTE:: raise objection to prevent simulation stopping
phase.raise_objection(this);
`uvm_info(get_type_name(), "=====================STARTED=====================", UVM_LOW)
this.do_reg();
this.do_formatter();
this.do_data();
`uvm_info(get_type_name(), "=====================FINISHED=====================", UVM_LOW)
// NOTE:: drop objection to request simulation stopping
phase.drop_objection(this);
endtask
// do register configuration
virtual task do_reg();
endtask
// do external formatter down stream slave configuration
virtual task do_formatter();
endtask
// do data transition from 3 channel slaves
virtual task do_data();
endtask
virtual function void set_interface(virtual chnl_intf ch0_vif
,virtual chnl_intf ch1_vif
,virtual chnl_intf ch2_vif
,virtual reg_intf reg_vif
,virtual arb_intf arb_vif
,virtual fmt_intf fmt_vif
,virtual mcdf_intf mcdf_vif
);
this.env.chnl_agts[0].set_interface(ch0_vif);
this.env.chnl_agts[1].set_interface(ch1_vif);
this.env.chnl_agts[2].set_interface(ch2_vif);
this.env.reg_agt.set_interface(reg_vif);
this.env.fmt_agt.set_interface(fmt_vif);
this.env.chker.set_interface(mcdf_vif, '{ch0_vif, ch1_vif, ch2_vif}, arb_vif);
this.env.cvrg.set_interface('{ch0_vif, ch1_vif, ch2_vif}, reg_vif, arb_vif, fmt_vif, mcdf_vif);
endfunction
virtual function bit diff_value(int val1, int val2, string id = "value_compare");
if(val1 != val2) begin
`uvm_error("[CMPERR]", $sformatf("ERROR! %s val1 %8x != val2 %8x", id, val1, val2))
return 0;
end
else begin
`uvm_info("[CMPSUC]", $sformatf("SUCCESS! %s val1 %8x == val2 %8x", id, val1, val2), UVM_LOW)
return 1;
end
endfunction
// remove the tasks and they are implemented already by register
//sequences
// -idle_reg()
// -write_reg()
// -read_reg()
virtual task idle_reg();
void'(reg_gen.randomize() with {cmd == `IDLE; addr == 0; data == 0;});
reg_gen.start();
endtask
virtual task write_reg(bit[7:0] addr, bit[31:0] data);
void'(reg_gen.randomize() with {cmd == `WRITE; addr == local::addr; data == local::data;});
reg_gen.start();
endtask
virtual task read_reg(bit[7:0] addr, output bit[31:0] data);
void'(reg_gen.randomize() with {cmd == `READ; addr == local::addr;});
reg_gen.start();
data = reg_gen.data;
endtask
endclass: mcdf_base_test
4. 移动uvm_base_test的transaction发送方法。
将已经被从uvm_base_test移植到reg_pkg中的方法idle_reg()、write_reg()和read_rge()从uvm_base_test中移除。由此uvm_base_test只变为了容器的性质，在它内部主要由mdcf_env、mcdf_config配置对象以及被用来挂载的顶层sequence构成。
task run_phase(uvm_phase phase);
// NOTE:: raise objection to prevent simulation stopping
phase.raise_objection(this);
this.run_top_virtual_sequence();
// NOTE:: drop objection to request simulation stopping
phase.drop_objection(this);
endtask
virtual task run_top_virtual_sequence();
// User to implement this task in the child tests
endtask
//remove the tasks and they are implemented already by register
//sequences
// -idle_reg()
// -write_reg()
// -read_reg()
/*
virtual task idle_reg();
void'(reg_gen.randomize() with {cmd == `IDLE; addr == 0; data == 0;});
reg_gen.start();
endtask
virtual task write_reg(bit[7:0] addr, bit[31:0] data);
void'(reg_gen.randomize() with {cmd == `WRITE; addr == local::addr; data == local::data;});
reg_gen.start();
endtask
virtual task read_reg(bit[7:0] addr, output bit[31:0] data);
void'(reg_gen.randomize() with {cmd == `READ; addr == local::addr;});
reg_gen.start();
data = reg_gen.data;
endtask
*/
5. 添加顶层的virtual sequencer
由于MCDF验证环境中存在多个底层sequencer和sequence，因此这就需要有顶层的virtual sequencer与virtual sequence统一调度。在定义了mcdf_virtual_sequencer之后，在mcdf_env中声明、例化，并且完成于底层squencer的句柄连接。
class mcdf_virtual_sequencer extends uvm_sequencer;
reg_sequencer reg_sqr;
fmt_sequencer fmt_sqr;
chnl_sequencer chnl_sqrs[3];
`uvm_component_utils(mcdf_virtual_sequencer)
function new (string name = "mcdf_virtual_sequencer", uvm_component parent);
super.new(name, parent);
endfunction
endclass
// MCDF top environment
class mcdf_env extends uvm_env;
chnl_agent chnl_agts[3];
reg_agent reg_agt;
fmt_agent fmt_agt;
mcdf_checker chker;
mcdf_coverage cvrg;
// declare the virtual sequencer handle
mcdf_virtual_sequencer virt_sqr;
`uvm_component_utils(mcdf_env)
function new (string name = "mcdf_env", uvm_component parent);
super.new(name, parent);
endfunction
function void build_phase(uvm_phase phase);
super.build_phase(phase);
this.chker = mcdf_checker::type_id::create("chker", this);
foreach(chnl_agts[i]) begin
this.chnl_agts[i] = chnl_agent::type_id::create($sformatf("chnl_agts[%0d]",i), this);
end
this.reg_agt = reg_agent::type_id::create("reg_agt", this);
this.fmt_agt = fmt_agent::type_id::create("fmt_agt", this);
this.cvrg = mcdf_coverage::type_id::create("cvrg", this);
// instantiate the virtual sequencer
virt_sqr = mcdf_virtual_sequencer::type_id::create("virt_sqr", this);
endfunction
function void connect_phase(uvm_phase phase);
super.connect_phase(phase);
chnl_agts[0].monitor.mon_bp_port.connect(chker.chnl0_bp_imp);
chnl_agts[1].monitor.mon_bp_port.connect(chker.chnl1_bp_imp);
chnl_agts[2].monitor.mon_bp_port.connect(chker.chnl2_bp_imp);
reg_agt.monitor.mon_bp_port.connect(chker.reg_bp_imp);
fmt_agt.monitor.mon_bp_port.connect(chker.fmt_bp_imp);
// connect the sequencer handles of the virtual sequencer to
//those dedicated sequencer objects inside the agents
virt_sqr.reg_sqr = reg_agt.sequencer;
virt_sqr.fmt_sqr = fmt_agt.sequencer;
foreach(virt_sqr.chnl_sqrs[i]) virt_sqr.chnl_sqrs[i] = chnl_agts[i].sequencer;
endfunction
endclass: mcdf_env
6. 重构mcdf_base_test
原有的mcdf_base_test除了承担其容器的功能，还在其run_phase阶段中实现了sequence的分阶段发送功能。在添加了顶层的virtual sequencer之后，需要将所有发送序列的顺序和组织等内容均移植到mcdf_base_virtual_sequence，因此需要将mdcf_base_test::run_phase（）发送序列的功能移植到定义的mcdf_base_virtual_sequence一侧，而在移植后，mcdf_base_test::run_phase()只需要挂载对应的顶层virtual_sequence即可。
// MCDF base test 容器作用
class mcdf_base_test extends uvm_test;
// remove the generators' handle clarification
mcdf_env env;
virtual chnl_intf ch0_vif ;
virtual chnl_intf ch1_vif ;
virtual chnl_intf ch2_vif ;
virtual reg_intf reg_vif ;
virtual arb_intf arb_vif ;
virtual fmt_intf fmt_vif ;
virtual mcdf_intf mcdf_vif;
`uvm_component_utils(mcdf_base_test)
function new(string name = "mcdf_base_test", uvm_component parent);
super.new(name, parent);
endfunction
function void build_phase(uvm_phase phase);
super.build_phase(phase);
// get virtual interface from top TB
if(!uvm_config_db#(virtual chnl_intf)::get(this,"","ch0_vif", ch0_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
if(!uvm_config_db#(virtual chnl_intf)::get(this,"","ch1_vif", ch1_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
if(!uvm_config_db#(virtual chnl_intf)::get(this,"","ch2_vif", ch2_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
if(!uvm_config_db#(virtual reg_intf)::get(this,"","reg_vif", reg_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
if(!uvm_config_db#(virtual arb_intf)::get(this,"","arb_vif", arb_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
if(!uvm_config_db#(virtual fmt_intf)::get(this,"","fmt_vif", fmt_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
if(!uvm_config_db#(virtual mcdf_intf)::get(this,"","mcdf_vif", mcdf_vif)) begin
`uvm_fatal("GETVIF","cannot get vif handle from config DB")
end
this.env = mcdf_env::type_id::create("env", this);
// remove the generators' instantiation
endfunction
function void connect_phase(uvm_phase phase);
super.connect_phase(phase);
// After get virtual interface from config_db, and then set them to
// child components
this.set_interface(ch0_vif, ch1_vif, ch2_vif, reg_vif, arb_vif, fmt_vif, mcdf_vif);
// remove the cross-hierarchy handle connection between drivers
//and generators since they are now connected inside the agents by the
//TLM ports connection between the sequencer and the driver
endfunction
function void end_of_elaboration_phase(uvm_phase phase);
super.end_of_elaboration_phase(phase);
uvm_root::get().set_report_verbosity_level_hier(UVM_HIGH);
uvm_root::get().set_report_max_quit_count(1);
uvm_root::get().set_timeout(10ms);
endfunction
task run_phase(uvm_phase phase);
// NOTE:: raise objection to prevent simulation stopping
phase.raise_objection(this);
this.run_top_virtual_sequence();
// NOTE:: drop objection to request simulation stopping
phase.drop_objection(this);
endtask
virtual task run_top_virtual_sequence();
// User to implement this task in the child tests
endtask
virtual function void set_interface(virtual chnl_intf ch0_vif
,virtual chnl_intf ch1_vif
,virtual chnl_intf ch2_vif
,virtual reg_intf reg_vif
,virtual arb_intf arb_vif
,virtual fmt_intf fmt_vif
,virtual mcdf_intf mcdf_vif
);
this.env.chnl_agts[0].set_interface(ch0_vif);
this.env.chnl_agts[1].set_interface(ch1_vif);
this.env.chnl_agts[2].set_interface(ch2_vif);
this.env.reg_agt.set_interface(reg_vif);
this.env.fmt_agt.set_interface(fmt_vif);
this.env.chker.set_interface(mcdf_vif, '{ch0_vif, ch1_vif, ch2_vif}, arb_vif);
this.env.cvrg.set_interface('{ch0_vif, ch1_vif, ch2_vif}, reg_vif, arb_vif, fmt_vif, mcdf_vif);
endfunction
// remove the tasks and they are implemented already by register
//sequences
// -idle_reg()
// -write_reg()
// -read_reg()
endclass: mcdf_base_test
class mcdf_base_virtual_sequence extends uvm_sequence;
idle_reg_sequence idle_reg_seq;
write_reg_sequence write_reg_seq;
read_reg_sequence read_reg_seq;
chnl_data_sequence chnl_data_seq;
fmt_config_sequence fmt_config_seq;
`uvm_object_utils(mcdf_base_virtual_sequence)
`uvm_declare_p_sequencer(mcdf_virtual_sequencer)
function new (string name = "mcdf_base_virtual_sequence");
super.new(name);
endfunction
virtual task body();
`uvm_info(get_type_name(), "=====================STARTED=====================", UVM_LOW)
this.do_reg();
this.do_formatter();
this.do_data();
`uvm_info(get_type_name(), "=====================FINISHED=====================", UVM_LOW)
endtask
// do register configuration
virtual task do_reg();
//User to implment the task in the child virtual sequence
endtask
// do external formatter down stream slave configuration
virtual task do_formatter();
//User to implment the task in the child virtual sequence
endtask
// do data transition from 3 channel slaves
virtual task do_data();
//User to implment the task in the child virtual sequence
endtask
virtual function bit diff_value(int val1, int val2, string id = "value_compare");
if(val1 != val2) begin
`uvm_error("[CMPERR]", $sformatf("ERROR! %s val1 %8x != val2 %8x", id, val1, val2))
return 0;
end
else begin
`uvm_info("[CMPSUC]", $sformatf("SUCCESS! %s val1 %8x == val2 %8x", id, val1, val2), UVM_LOW)
return 1;
end
endfunction
endclass
7. 重构mcdf_data_consistence_basic_test
将其产生和发送transaction的任务，都移植到mcdf_data_consistence_basic_virtual_sequence，而进一步减轻mcdf_data_consistence_basic_test的代码量。测试的动态场景往往都是由virtual sequence统一组织的，而test层往往之后做run_phase前的一些验证环境的配置。
class mcdf_data_consistence_basic_virtual_sequence extends mcdf_base_virtual_sequence;
`uvm_object_utils(mcdf_data_consistence_basic_virtual_sequence)
function new (string name = "mcdf_data_consistence_basic_virtual_sequence");
super.new(name);
endfunction
task do_reg();
bit[31:0] wr_val, rd_val;
// slv0 with len=8, prio=0, en=1
wr_val = (1<<3)+(0<<1)+1;
`uvm_do_on_with(write_reg_seq, p_sequencer.reg_sqr, {addr == `SLV0_RW_ADDR; data == wr_val;})
`uvm_do_on_with(read_reg_seq, p_sequencer.reg_sqr, {addr == `SLV0_RW_ADDR;})
rd_val = read_reg_seq.data;
void'(this.diff_value(wr_val, rd_val, "SLV0_WR_REG"));
// slv1 with len=16, prio=1, en=1
wr_val = (2<<3)+(1<<1)+1;
`uvm_do_on_with(write_reg_seq, p_sequencer.reg_sqr, {addr == `SLV1_RW_ADDR; data == wr_val;})
`uvm_do_on_with(read_reg_seq, p_sequencer.reg_sqr, {addr == `SLV1_RW_ADDR;})
rd_val = read_reg_seq.data;
void'(this.diff_value(wr_val, rd_val, "SLV1_WR_REG"));
// slv2 with len=32, prio=2, en=1
wr_val = (3<<3)+(2<<1)+1;
`uvm_do_on_with(write_reg_seq, p_sequencer.reg_sqr, {addr == `SLV2_RW_ADDR; data == wr_val;})
`uvm_do_on_with(read_reg_seq, p_sequencer.reg_sqr, {addr == `SLV2_RW_ADDR;})
rd_val = read_reg_seq.data;
void'(this.diff_value(wr_val, rd_val, "SLV2_WR_REG"));
// send IDLE command
`uvm_do_on(idle_reg_seq, p_sequencer.reg_sqr)
endtask
task do_formatter();
`uvm_do_on_with(fmt_config_seq, p_sequencer.fmt_sqr, {fifo == LONG_FIFO; bandwidth == HIGH_WIDTH;})
endtask
task do_data();
fork
`uvm_do_on_with(chnl_data_seq, p_sequencer.chnl_sqrs[0], {ntrans==100; ch_id==0; data_nidles==0; pkt_nidles==1; data_size==8; })
`uvm_do_on_with(chnl_data_seq, p_sequencer.chnl_sqrs[1], {ntrans==100; ch_id==1; data_nidles==1; pkt_nidles==4; data_size==16;})
`uvm_do_on_with(chnl_data_seq, p_sequencer.chnl_sqrs[2], {ntrans==100; ch_id==2; data_nidles==2; pkt_nidles==8; data_size==32;})
join
#10us; // wait until all data haven been transfered through MCDF
endtask
endclass: mcdf_data_consistence_basic_virtual_sequence
class mcdf_data_consistence_basic_test extends mcdf_base_test;
`uvm_component_utils(mcdf_data_consistence_basic_test)
function new(string name = "mcdf_data_consistence_basic_test", uvm_component parent);
super.new(name, parent);
endfunction
task run_top_virtual_sequence();
mcdf_data_consistence_basic_virtual_sequence top_seq = new();
top_seq.start(env.virt_sqr);
endtask
endclass: mcdf_data_consistence_basic_test
1万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
