关注微信公众号,回复“uboot源码”,免费下载源码包
make menuconfig
启动参数,代码中加载过来的,在这里也可以修改;
支持的网络命令
Command line interface —>
[*] Network commands --->
4、设备树支持
Device Tree Control --->
5、环境变量
Environment --->
[ ] Environment in EEPROM │ │
│ │ [ ] Environment is in a FAT filesystem │ │
│ │[ ] Environment is in a EXT4 filesystem │ │
│ │ [ ] Environment in flash memory │ │
│ │ [ ] Environment in an MMC device │ │
│ │ [*] Environment in a NAND device │ │
│ │ [ ] Environment in a non-volatile RAM │ │
│ │ [ ] Environment is in OneNAND │ │
│ │ [ ] Environment is in remove memory space │ │
│ │[ ] Environment is in SPI flash │ │
│ │ [ ] Environment in a UBI volume │ │
│ │ [ ] Create default environment from file │ │
│ │ [ ] Add run-time information to the environment
[*] Networking support —>
[]Device Drivers --->
Generic Driver Options ---> │ │
│ │[ ] Enable ADC drivers using Driver Model │ │
│ │[ ] Enable Exynos 54xx ADC driver │ │
│ │[ ] Enable Sandbox ADC test driver │ │
│ │[ ] Enable Amlogic Meson SARADC driver │ │
│ │[ ] Enable Rockchip SARADC driver │ │
│ │[ ] Support SATA controllers with driver model │ │
│ │[ ] Support SATA controllers │ │
│ │[ ] Enable SCSI interface to SATA devices │ │
│ │ SATA/SCSI device support ---> │ │
│ │[*] Support block devices │ │
│ │-*- Enable Legacy Block Device │ │
│ │[*] Support block devices in SPL │ │
│ │[*] Use block device cache │ │
│ │[ ] Use block device cache in SPL │ │
│ │[ ] Support IDE controllers │ │
│ │[ ] Enable support for checking boot count limit ---- │ │
│ │ Clock ---> │ │
│ │ [ ] Enable CPU drivers using Driver Model │ │
│ │ Hardware crypto devices ---> │ │
│ │ Demo for driver model ---> │ │
│ │ DFU support ---- │ │
│ │ DMA Support ---> │ │
│ │ UBI support ---> │ │
│ │ [ ] Bit-banged ethernet MII management channel support │ │
│ │[ ] Marvell 88E6352 switch support │ │
│ │-*- Ethernet PHY (physical media interface) support --->
更多linux知识点推荐:
[Linux 底层]U-boot ksz9031网络驱动调试
[Linux 底层]U-boot调试命令使用技巧
[Linux 底层]U-boot编译移植
[Linux 底层]U-boot烧录脚本介绍SecureCRT
[Linux 底层]bootstrap移植裁剪及编译
[Linux 底层] 平台软件分层介绍
[Linux 驱动] RS485测试程序编写
[Linux 驱动] CAN测试程序编写
推荐阅读:
芯片手册解读 | Linux底层
关注微信公众号,回复“uboot源码”,免费下载源码包。