金融风控05

逻辑回归评分卡

损失函数

建评分卡步骤

建回归模型

对模型评分映射

评价指标：召回率计算，精准率计算

 

import pandas as pd
from sklearn.metrics import roc_auc_score,roc_curve,auc
from sklearn.model_selection import train_test_split
from sklearn import metrics
from sklearn.linear_model import LogisticRegression
import numpy as np
import random
import math

data = pd.read_csv('Acard.txt')
data.head()

#看一下月份分布，我们用最后一个月做为跨时间验证集合
data.obs_mth.unique()

train = data[data.obs_mth != '2018-11-30'].reset_index().copy()
val = data[data.obs_mth == '2018-11-30'].reset_index().copy()

#这是我们全部的变量，info结尾的是自己做的无监督系统输出的个人表现，score结尾的是收费的外部征信数据
feature_lst = ['person_info','finance_info','credit_info','act_info','td_score','jxl_score','mj_score','rh_score']

x = train[feature_lst]
y = train['bad_ind']

val_x =  val[feature_lst]
val_y = val['bad_ind']

lr_model = LogisticRegression(C=0.1)
lr_model.fit(x,y)

模型评价：KS值 ROC曲线

描绘的是不同的截断点时，并以FPR和TPR为横纵坐标轴，描述随着截断点的变小，TPR随着FPR的变化。
纵轴：TPR=正例分对的概率 = TP/(TP+FN)，其实就是查全率
横轴：FPR=负例分错的概率 = FP/(FP+TN)

作图步骤：

根据学习器的预测结果（注意，是正例的概率值，非0/1变量）对样本进行排序（从大到小）-----这就是截断点依次选取的顺序 按顺序选取截断点，并计算TPR和FPR---也可以只选取n个截断点，分别在1/n，2/n，3/n等位置 连接所有的点（TPR，FPR）即为ROC图

ks值作图步骤：

根据学习器的预测结果（注意，是正例的概率值，非0/1变量）对样本进行排序（从大到小）-----这就是截断点依次选取的顺序
按顺序选取截断点，并计算TPR和FPR ---也可以只选取n个截断点，分别在1/n，2/n，3/n等位置
横轴为样本的占比百分比（最大100%），纵轴分别为TPR和FPR，可以得到KS曲线
TPR和FPR曲线分隔最开的位置就是最好的”截断点“，最大间隔距离就是KS值，通常>0.2即可认为模型有比较好偶的预测准确性

 

y_pred = lr_model.predict_proba(x)[:,1]
fpr_lr_train,tpr_lr_train,_ = roc_curve(y,y_pred)
train_ks = abs(fpr_lr_train - tpr_lr_train).max()
print('train_ks : ',train_ks)

y_pred = lr_model.predict_proba(val_x)[:,1]
fpr_lr,tpr_lr,_ = roc_curve(val_y,y_pred)
val_ks = abs(fpr_lr - tpr_lr).max()
print('val_ks : ',val_ks)

from matplotlib import pyplot as plt
plt.plot(fpr_lr_train,tpr_lr_train,label = 'train LR')
plt.plot(fpr_lr,tpr_lr,label = 'evl LR')
plt.plot([0,1],[0,1],'k--')
plt.xlabel('False positive rate')
plt.ylabel('True positive rate')
plt.title('ROC Curve')
plt.legend(loc = 'best')
plt.show()

#再做特征筛选
from statsmodels.stats.outliers_influence import variance_inflation_factor
X = np.array(x)
for i in range(X.shape[1]):
    print(variance_inflation_factor(X,i))

import lightgbm as lgb
from sklearn.model_selection import train_test_split
train_x,test_x,train_y,test_y = train_test_split(x,y,random_state=0,test_size=0.2)
def  lgb_test(train_x,train_y,test_x,test_y):
    clf =lgb.LGBMClassifier(boosting_type = 'gbdt',
                           objective = 'binary',
                           metric = 'auc',
                           learning_rate = 0.1,
                           n_estimators = 24,
                           max_depth = 5,
                           num_leaves = 20,
                           max_bin = 45,
                           min_data_in_leaf = 6,
                           bagging_fraction = 0.6,
                           bagging_freq = 0,
                           feature_fraction = 0.8,
                           )
    clf.fit(train_x,train_y,eval_set = [(train_x,train_y),(test_x,test_y)],eval_metric = 'auc')
    return clf,clf.best_score_['valid_1']['auc'],
lgb_model , lgb_auc  = lgb_test(train_x,train_y,test_x,test_y)
feature_importance = pd.DataFrame({'name':lgb_model.booster_.feature_name(),
                                   'importance':lgb_model.feature_importances_}).sort_values(by=['importance'],ascending=False)
feature_importance

feature_lst = ['person_info','finance_info','credit_info','act_info']
x = train[feature_lst]
y = train['bad_ind']

val_x =  val[feature_lst]
val_y = val['bad_ind']

lr_model = LogisticRegression(C=0.1,class_weight='balanced')
lr_model.fit(x,y)
y_pred = lr_model.predict_proba(x)[:,1]
fpr_lr_train,tpr_lr_train,_ = roc_curve(y,y_pred)
train_ks = abs(fpr_lr_train - tpr_lr_train).max()
print('train_ks : ',train_ks)

y_pred = lr_model.predict_proba(val_x)[:,1]
fpr_lr,tpr_lr,_ = roc_curve(val_y,y_pred)
val_ks = abs(fpr_lr - tpr_lr).max()
print('val_ks : ',val_ks)
from matplotlib import pyplot as plt
plt.plot(fpr_lr_train,tpr_lr_train,label = 'train LR')
plt.plot(fpr_lr,tpr_lr,label = 'evl LR')
plt.plot([0,1],[0,1],'k--')
plt.xlabel('False positive rate')
plt.ylabel('True positive rate')
plt.title('ROC Curve')
plt.legend(loc = 'best')
plt.show()

# 系数
print('变量名单：',feature_lst)
print('系数：',lr_model.coef_)
print('截距：',lr_model.intercept_)
#生成报告
model = lr_model
row_num, col_num = 0, 0
bins = 20
Y_predict = [s[1] for s in model.predict_proba(val_x)]
Y = val_y
nrows = Y.shape[0]
lis = [(Y_predict[i], Y[i]) for i in range(nrows)]
ks_lis = sorted(lis, key=lambda x: x[0], reverse=True)
bin_num = int(nrows/bins+1)
bad = sum([1 for (p, y) in ks_lis if y > 0.5])
good = sum([1 for (p, y) in ks_lis if y <= 0.5])
bad_cnt, good_cnt = 0, 0
KS = []
BAD = []
GOOD = []
BAD_CNT = []
GOOD_CNT = []
BAD_PCTG = []
BADRATE = []
dct_report = {}
for j in range(bins):
    ds = ks_lis[j*bin_num: min((j+1)*bin_num, nrows)]
    bad1 = sum([1 for (p, y) in ds if y > 0.5])
    good1 = sum([1 for (p, y) in ds if y <= 0.5])
    bad_cnt += bad1
    good_cnt += good1
    bad_pctg = round(bad_cnt/sum(val_y),3)
    badrate = round(bad1/(bad1+good1),3)
    ks = round(math.fabs((bad_cnt / bad) - (good_cnt / good)),3)
    KS.append(ks)
    BAD.append(bad1)
    GOOD.append(good1)
    BAD_CNT.append(bad_cnt)
    GOOD_CNT.append(good_cnt)
    BAD_PCTG.append(bad_pctg)
    BADRATE.append(badrate)
    dct_report['KS'] = KS
    dct_report['BAD'] = BAD
    dct_report['GOOD'] = GOOD
    dct_report['BAD_CNT'] = BAD_CNT
    dct_report['GOOD_CNT'] = GOOD_CNT
    dct_report['BAD_PCTG'] = BAD_PCTG
    dct_report['BADRATE'] = BADRATE
val_repot = pd.DataFrame(dct_report)
val_repot

from pyecharts.charts import *
from pyecharts import options as opts
from pylab import *
mpl.rcParams['font.sans-serif'] = ['SimHei']
np.set_printoptions(suppress=True)
pd.set_option('display.unicode.ambiguous_as_wide', True)
pd.set_option('display.unicode.east_asian_width', True)
line = (

    Line()
    .add_xaxis(list(val_repot.index))
    .add_yaxis(
        "分组坏人占比",
        list(val_repot.BADRATE),
        yaxis_index=0,
        color="red",
    )
    .set_global_opts(
        title_opts=opts.TitleOpts(title="行为评分卡模型表现"),
    )
    .extend_axis(
        yaxis=opts.AxisOpts(
            name="累计坏人占比",
            type_="value",
            min_=0,
            max_=0.5,
            position="right",
            axisline_opts=opts.AxisLineOpts(
                linestyle_opts=opts.LineStyleOpts(color="red")
            ),
            axislabel_opts=opts.LabelOpts(formatter="{value}"),
        )

    )
    .add_xaxis(list(val_repot.index))
    .add_yaxis(
        "KS",
        list(val_repot['KS']),
        yaxis_index=1,
        color="blue",
        label_opts=opts.LabelOpts(is_show=False),
    )
)
line.render_notebook()

#['person_info','finance_info','credit_info','act_info']
#算分数onekey 
def score(person_info,finance_info,credit_info,act_info):
    xbeta = person_info * ( 3.49460978) + finance_info * ( 11.40051582 ) + credit_info * (2.45541981) + act_info * ( -1.68676079) --0.34484897 
    score = 650-34* (xbeta)/math.log(2)
    return score
val['score'] = val.apply(lambda x : score(x.person_info,x.finance_info,x.credit_info,x.act_info) ,axis=1)

fpr_lr,tpr_lr,_ = roc_curve(val_y,val['score'])
val_ks = abs(fpr_lr - tpr_lr).max()
print('val_ks : ',val_ks)

#对应评级区间
def level(score):
    level = 0
    if score <= 600:
        level = "D"
    elif score <= 640 and score > 600 : 
        level = "C"
    elif score <= 680 and score > 640:
        level = "B"
    elif  score > 680 :
        level = "A"
    return level
val['level'] = val.score.map(lambda x : level(x) )

val.level.groupby(val.level).count()/len(val)

import seaborn as sns
sns.distplot(val.score,kde=True)

val = val.sort_values('score',ascending=True).reset_index(drop=True)
df2=val.bad_ind.groupby(val['level']).sum()
df3=val.bad_ind.groupby(val['level']).count()
print(df2/df3)