一.简介
CSS是级联样式表(Cascading Style Sheets)的缩写。HTML 用于撰写页面的内容,而 CSS 将决定这些内容该如何在屏幕上呈现。
网页的内容是由 HTML的元素构建的,这些元素如何呈现,涉及许多方面,如整个页面的布局,元素的位置、距离、颜色、大小、是否显示、是否浮动、透明度等等。
二.具体内容
1.CSS 语法
一条CSS样式规则由两个主要的部分构成:选择器,以{}包裹的一条或多条声明:
上图这条规则表明,页面中所有的一级标题都显示为蓝色,字体大小为12像素。
说明:
- 选择器是需要改变样式的对象。
- 每条声明由一个属性和一个值组成。(无论是一条或多条声明,都需要用{}包裹,且声明用;分割)
属性是希望设置的样式属性。每个属性有一个值。属性和值被冒号分开。
<h1>This is heading 1</h1>
h1 {
color:red;
font-size: 12px;
}
效果:
选择器:
一个页面上的元素众多,选择器就用于在页面中找到/选择需要应用这个样式的对象。
除我们前示的元素选择器外,还有id和class选择器。其中class选择器使用非常普遍。
id 选择器
<p id="sky">蓝蓝的天空</p>
/* 注意:id选择器前有 # 号。 */
#sky{
color: blue;
}
效果:
注意:
HTML中,元素的id值必须唯一, 所以,id 选择器适用范围只有一个元素。
class 选择器
元素的class值可以多个,也可以重复。
<p class="center">居中</p>
<p class="red">红色</p>
<p class="center large red">又红又大还居中</p>
<p class="red">我也可以是红色</p>
/* 注意:class选择器前有 . 号。 */
.center{
text-align: center;
}
.large{
font-size: 30px;
}
.red{
color: red;
}
效果:
2.CSS生效方法
我们一般有三种方法:外部样式表,内部样式表,内联样式。
外部样式表
在html的<head>标签里引入:
<link rel="stylesheet" href="../css/test1.css">
在href里引入css文件具体路径,在css文件里写样式表。 引入外部样式表是我们使用样式的主流方式,因为众多的样式规则单独放在一个文件中,与 HTML 内容分开,结构清晰。同时其它页面也可使用,达到复用的目的。
内部样式表
可以将样式放在 HTML 文件中,这称为内部样式表。在<head<元素中引入了<style<标签,放入了样式。一般而言,只有页面的样式规则较少时可采用这种方式。
<!DOCTYPE html>
<html>
<head>
<meta charset="utf-8">
<link rel="shortcut icon" href="favicon.ico" type="image/x-icon">
<link rel="stylesheet" href="../css/tes.css">
<title>test1</title>
<style>
body {
background-color: linen;
text-align: center;
}
h1 {
color: red;
}
.haha {
margin-top: 100px;
color: chocolate;
font-size: 50px;
}
</style>
</head>
<body>
<h1>This is heading 1</h1>
<p id="sky">蓝蓝的天空</p>
<p class="red">红色</p>
<p class="center large red">又红又大还居中</p>
<p class="red">我也可以是红色</p>
<p class="haha">哈哈</p>
</body>
</html>
效果:
内联样式
所谓内联样式,就是直接把样式规则直接写到要应用的元素中,内联样式是最不灵活的一种方式,完全将内容和样式合在一起,实际应用中非常少见。例如:
<h3 style="color:green;">I am a heading</h3>
效果:
级联的优先级
样式的优先级问题,从高到低分别是:
1.内联样式
2.内部样式表或外部样式表
3.浏览器缺省样式
提示: 其实,一句话可总结为哪个样式定义离元素的距离近,哪个就生效。
3.颜色
可以采用颜色名称也可以使用颜色RGB16进制值,来设定前景或背景的颜色。
<!-- 颜色名称 -->
<h3 style="background-color:Tomato;">Tomato</h3>
<h3 style="background-color:Orange;">Orange</h3>
<h3 style="background-color:DodgerBlue;">DodgerBlue</h3>
<h3 style="background-color:MediumSeaGreen;">MediumSeaGreen</h3>
<h3 style="background-color:Gray;">Gray</h3>
<h3 style="background-color:SlateBlue;">SlateBlue</h3>
<hr>
<!-- 颜色值,3个字节分别代表RGB(Red,Green,Blue)的0~255的值 -->
<h3 style="background-color:#ff0000;">#ff0000</h3>
<h3 style="background-color:#0000ff;">#0000ff</h3>
<h3 style="background-color:#3cb371;">#3cb371</h3>
<h3 style="background-color:#ee82ee;">#ee82ee</h3>
<h3 style="background-color:#ffa500;">#ffa500</h3>
<h3 style="background-color:#6a5acd;">#6a5acd</h3>
<!-- 文本颜色 -->
<h3 style="color:Tomato;">Hello World</h3>
<p style="color:DodgerBlue;">Lorem ipsum dolor sit, amet consectetur adipisicing elit.</p>
<p style="color:MediumSeaGreen;">Ad facilis est ducimus rem consectetur, corporis omnis, eveniet esse dolor molestiae numquam odio corrupti, sed obcaecati praesentium accusamus? Tempora, dolor a?</p>
效果:
4.尺寸
我们可以用 height 和 width 设定元素内容占据的尺寸。常见的尺寸单位有:像数 px,百分比 %等。
HTML中:
<div class="example-1">
这个元素高 200 pixels,占据全部宽度
</div>
<div class="example-2">
这个元素宽200像素,高300像素
</div>
对应css样式表:
.example-1 {
width: 100%;
height: 200px;
background-color: powderblue;
text-align: center;
}
.example-2 {
height: 100px;
width: 500px;
background-color: rgb(73, 138, 60);
text-align: right;
}
效果:
5.对齐
对于元素中的文本,我们可以简单的设置text-align属性为left, center, right即可(显然缺省的是左对齐),上例中已有相关的应用。
6.盒子模型
盒子模型指的是一个 HTML 元素可以看作一个盒子。从内到外,这个盒子是由内容 content, 内边距 padding, 边框 border, 外边距 margin构成的,无论边框、内边距还是外边距,它们都有上下左右四个方向。如下图所示:
说明:
- Content 盒子的内容,如文本、图片等
- Padding 填充,也叫内边距,即内容和边框之间的区域
- Border 边框,默认不显示
- Margin 外边距,边框以外与其它元素的区域
<div class="box1">我是内容一,外面红色的是我的边框。注意边框的内外都有25px的距离。</div>
<div class="box2">我是内容二,外面蓝色的是我的边框。注意与上面元素的外边距,发生了叠加,不是50px而是25px。</div>
对应的CSS样式表:
.box1 {
height: 200px;
width: 200px;
background-color:#615200;
color: aliceblue;
border: 10px solid red;
padding: 25px;
margin: 25px;
}
.box2 {
height: 300px;
width: 300px;
background-color:#004d61;
color: aliceblue;
border: 10px solid blue;
padding: 25px;
margin: 25px;
}
7.边框与边距
边框
<p class="example-1">I have black borders on all sides.</p>
<p class="example-2">I have a blue bottom border.</p>
<p class="example-3">I have rounded grey borders.</p>
<p class="example-4">I have a purple left border.</p>
.example-1 {
border: 1px dotted black; /* 上下左右都相同 */
}
.example-2 {
border-bottom: 1px solid blue; /* 只设置底部边框 */
}
.example-3 {
border: 1px solid grey;
border-radius: 15px; /* 边框圆角 */
}
.example-4 {
border-left: 5px solid purple;
}
效果:
边距
内边距:
padding: 20px; /* 上下左右都相同 */
padding-top: 20px;
padding-bottom: 100px;
padding-right: 50px;
padding-left: 80px;
padding: 25px 50px 75px 100px; /* 简写形式,按上,右,下,左顺序设置 */
padding: 25px 10px; /* 简写形式,上下为25px,左右为10px */
外边距与此类似。
8.定位
position属性用于对元素进行定位。该属性有以下一些值:
- static 静态
- relative 相对
- fixed 固定
- absolute 绝对
设置了元素的position属性后,我们才能使用top, bottom, left, right属性,否则定位无效。
static
设置为静态定位position: static;
,这是元素的默认定位方式。
即:按照元素在 HTML出现的先后顺序从上到下,从左到右进行元素的安排。
relative
设置为相对定位position: relative;
,这将把元素相对于他的静态(正常)位置进行偏移
<div class="example-relative">我偏移了正常显示的位置。去掉我的样式对比看看?</div>
<div >去掉样式</div>
.example-relative {
position: relative;
left: 60px;
top: 40px;
background-color: rgb(173, 241, 241);
}
效果:
fixed
设置为固定定位position: fixed;
,这将使得元素固定不动(即使你上下左右拖动浏览器的滚动条)。
此时元素固定的位置仍由top, bottom, left, right属性确定,但相对的是视口(viewport,就是浏览器的屏幕可见区域)
如下的代码将会在浏览器右下角固定放置一个按钮元素:
<div class="broad">占位区域。请将浏览器窗口改变大小,看看右下角的按钮发生了什么?</div>
<div class="example-fixed">这个按钮是固定的</div>
.example-fixed {
position: fixed;
bottom: 40px;
right: 10px;
padding: 6px 24px;
border-radius: 4px;
color: #fff;
background-color: #9d0f0f;
cursor: pointer;
box-shadow: 0 3px 3px 0 rgba(0,0,0,0.3), 0 1px 5px 0 rgba(0,0,0,0.12), 0 3px 1px -2px rgba(0,0,0,0.2);
}
.broad {
height: 5000px;
width: 5000px;
padding: 20px;
background-color: darkkhaki;
}
absolute
设置为绝对定位position: absolute;
,将使元素相对于其最近设置了定位属性(非static)的父元素进行偏移。
如果该元素的所有父元素都没有设置定位属性,那么就相对于<body>这个父元素。
<div class="example-relative">这是父元素,有 relative 定位属性
<div class="example-absolute">
这是子元素,有 absolute 定位属性
</div>
</div>
.example-relative {
position: relative;
width: 400px;
height: 200px;
border: 3px solid rgb(87, 33, 173);
}
.example-absolute {
position: absolute;
top: 80px;
right: 5px;
width: 200px;
height: 100px;
border: 3px solid rgb(218, 73, 16);
}
效果:
9.溢出
当元素内容超过其指定的区域时,我们通过溢出overflow属性来处理这些溢出的部分。
溢出属性有一下几个值:
- visible 默认值,溢出部分不被裁剪,在区域外面显示
- hidden 裁剪溢出部分且不可见
- scroll 裁剪溢出部分,但提供上下和左右滚动条供显示
- auto 裁剪溢出部分,视情况提供滚动条
visible
<div class="example-overflow-visible-y">You can use the overflow property when you want to have better control of the
layout. The overflow property specifies what happens if content overflows an element's box.
</div>
<br><br><br><br><br><br>
.example-overflow-visible-y {
width: 200px;
height: 100px;
background-color: #eee;
overflow-y: visible;
}
效果:
<div class="example-overflow-hidden-y">You can use the overflow property when you want to have better control of the
layout. The overflow property specifies what happens if content overflows an element's box.
</div>
<br><br><br><br><br><br>
.example-overflow-hidden-y {
width: 200px;
height: 100px;
background-color: #eee;
overflow-y: hidden;
}
效果:
<div class="example-overflow-scroll-y">You can use the overflow property when you want to have better control of the
layout. The overflow property specifies what happens if content overflows an element's box.
</div>
<br><br><br><br><br><br>
.example-overflow-scroll-y {
width: 200px;
height: 100px;
background-color: #eee;
overflow-y: scroll;
}
效果:
<div class="example-overflow-auto-y">You can use the overflow property when you want to have better control of the
layout. The overflow property specifies what happens if content overflows an element's box.
</div>
.example-overflow-auto-y {
width: 200px;
height: 100px;
background-color: #eee;
overflow-y: auto;
}
效果:
10.浮动
在一个区域或容器内,我们可以设置float属性让某元素水平方向上向左或右进行移动,其周围的元素也会重新排列。
我们常用这种样式来使图像和文本进行合理布局。
例子:让图片向右浮动
<html>
<head>
<style>
.example-float-right {
float: right;
}
</style>
</head>
<body>
<img src="https://mdbootstrap.com/img/Photos/Others/placeholder1.jpg" class="example-float-right" alt="">
<p>黄昏已经谢去,夜幕早已铺开。高高的法国梧桐,被刺眼的白色路灯照亮。
在黑色的夜空里镶了一圈又一圈攫绿,有时被拂过的夜风飘动,发出轻轻的沙沙声,只那么一阵,就消失在无限的宁静之中。</p>
</body>
</html>
效果:
11.不透明度
我们可以用opacity对任何元素(不过常用于图片)设置不透明度。
值在[0.0~1.0]之间,值越低,透明度越高。
例如:
<html>
<head>
<style>
img {
width: 25%;
border-radius: 10px;
float: left;
margin: 10px;
}
.opacity-2 {
opacity: 0.2;
}
.opacity-5 {
opacity: 0.5;
}
.opacity-10 {
opacity: 1;
}
</style>
</head>
<body>
<img class="opacity-2" src="https://woozill.github.io/svt/5009.jpg">
<img class="opacity-5" src="https://woozill.github.io/svt/5009.jpg">
<img class="opacity-10" src="https://woozill.github.io/svt/5009.jpg">
</body>
</html>
效果:
12.组合选择器
CSS有三种选择器:元素、id 和 class 。则三种选择器可以进行组合,以得到简洁精确的选择。
下面我们介绍两种组合选择器:后代选择器,子选择器。
后代选择器
以空格作为分隔,如:.haha p 代表在div元素内有.haha这种类的所有元素。
<html>
<head>
<style>
.haha p {
background-color: yellow;
}
</style>
</head>
<body>
<div class="haha">
<p>Paragraph 1 in the div .haha.</p>
<p>Paragraph 2 in the div .haha.</p>
<span>
<p>Paragraph 3 in the div .haha.</p>
</span>
</div>
<p>Paragraph 4. Not in a div .haha.</p>
<p>Paragraph 5. Not in a div .haha.</p>
</body>
</html>
效果:
子选择器
也称为直接后代选择器,以>作为分隔,如:.haha > p 代表在有.haha类的元素内的直接
元素。
<html>
<head>
<style>
.haha > p {
background-color: yellow;
}
</style>
</head>
<body>
<div class="haha">
<p>Paragraph 1 in the div .haha.</p>
<p>Paragraph 2 in the div .haha.</p>
<span>
<p>Paragraph 3 in the div .haha - it is descendant but not immediate child.</p>
</span> <!-- not Child but Descendant -->
</div>
<p>Paragraph 4. Not in a div .haha.</p>
<p>Paragraph 5. Not in a div .haha.</p>
</body>
</html>
效果:
13.伪类和伪元素
伪类或伪元素用于定义元素的某种特定的状态或位置等。
比如我们可能有这样的需求:
- 鼠标移到某元素上变换背景颜色
- 超链接访问前后访问后样式不同
- 离开必须填写的输入框时出现红色的外框进行警示
- 保证段落的第一行加粗,其它正常
语法:
/* 选择器后使用 : 号,再跟上某个伪类/伪元素 */
selector:pseudo-class/pseudo-element {
property:value;
}
常用的伪类/伪元素的简单使用:
a:link {color:#FF0000;} /* 未访问的链接 */
a:visited {color:#00FF00;} /* 已访问的链接 */
a:hover {color:#FF00FF;} /* 鼠标划过链接 */
/* 鼠标移到段落则改变背景颜色 */
p:hover {background-color: rgb(226, 43, 144);}
p:first-line{color:blue;} /* 段落的第一行显示蓝色 */
p:first-letter{font-size: xx-large;} /* 段落的第一个字超大 */
h1:before { content:url(smiley.gif); } /* 在每个一级标题前插入该图片 */
h1:after { content:url(smiley.gif); } /* 在每个一级标题后插入该图片 */