STM32F103C8T6寄存器组GPIOA、GPIOB、GPIOC详解

最新推荐文章于 2025-03-02 17:16:13 发布

just a little bit!

最新推荐文章于 2025-03-02 17:16:13 发布

阅读量3.2k

点赞数 17

文章标签： stm32 嵌入式硬件单片机

本文链接：https://blog.csdn.net/weixin_68142348/article/details/140299862

版权

1 示例：通过一个按钮控制LED灯亮灭，了解gpio外设寄存器组。

#include "stm32f10x.h"
#include "stm32f10x_pal.h"
#include "stm32f10x_rcc.h"
#include "stm32f10x_gpio.h"

int main(void)
{
	GPIO_InitTypeDef GPIOInitStruct;
	uint8_t current = Bit_SET;
	uint8_t previous = Bit_SET;
	PAL_Init();
	
	// PC13 Out_OD
	// GPIOC
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC, ENABLE); // GPIOC的时钟
	
	GPIOInitStruct.GPIO_Pin = GPIO_Pin_13;
	GPIOInitStruct.GPIO_Mode = GPIO_Mode_Out_OD;
	GPIOInitStruct.GPIO_Speed = GPIO_Speed_2MHz;
	GPIO_Init(GPIOC, &GPIOInitStruct);
//	GPIO_Write(GPIOC,0);
	// PA0  IPU
	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA, ENABLE); // GPIOA的时钟
	GPIOInitStruct.GPIO_Pin = GPIO_Pin_0;
	GPIOInitStruct.GPIO_Mode = GPIO_Mode_IPU;
	GPIO_Init(GPIOA, &GPIOInitStruct);
	
	while(1)
	{
		previous = current; 
		
		current = GPIO_ReadInputDataBit(GPIOA, GPIO_Pin_0);
		
		if(current != p