刷机！刷机！！刷机！！！

=== 2017-07-06 Update ===
What’s FINALLY worked
(CHINA) SM-G9250 Owners’ Thread
#584 from n0my

• Just HK version, NO custom recovery (default official recovery), NO root

log

• log-20170704.txt

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1207)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> NAND Write Start!! 
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> cache.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port ....  0 
<OSM> All threads completed. (succeed 1 / failed 0)

About Rooting

Secrets To Android Rooting
Don’t confuse with:

• Unlock Bootloader
• Root
• Custom Recovery
• Custom ROM
• Falsh

三星刷机工具Odin3使用教程 刷机五件套固件是什么

Odin3软件刷机五件套固件选择
Odin3软件刷机五件套固件 PITBLAPCPCSC 分别是什么？
1) PIT：分区信息，一般不需要刷，也不需要勾选re-partition选项；
2) BL：bootloader，引导信息；
3) AP或者PDA：安卓内核数据；
4) CP或者PHONE：基带数据；
5) CSC：厂家定制信息，即包括不同销售地区不同的信息，也包括厂家定制的一些APP，还包括合约机绑定的APP；
6) 除五件套外，官方一体包等单文件rom一般都选AP或者PDA刷入。

Easily Root Your Samsung Galaxy S6 Edge [4 Methods]

• Method 1: PingPong Root
• Method 2: One Click Root
• Method 3: CF Autoroot (preferred)
• Method 4: Kingo Android Root

How to Root the Samsung Galaxy J7 and Bring out Its True Potential
Install a Custom Recovery Before You Root
- A working PC, Mac, or Linux enabled computer
- A USB cable compatible with the J7
- A TWRP tar file
- An Odin exe
- A SuperSU rar

Your phone will reboot automatically, and your custom recovery will be installed.

The required parts and files for the actual root will be more or less the same.

• Method 1: Installing SuperSU with TWRP - using SuperSU zip file
• Method 2: Root Using Odin - using CF-Auto-Root, will install SuperSU app automatically
• Method 3: Kingroot APK (No PC Required)
• Method 4: One Click Root

Galaxy S6: How to Root
Basically using CF-Auto-Root tool from Chainfire
- What SuperSU does is it manages which applications are allowed to have root access.
- This way, when you install an application and it asks for root access, you can allow it or deny it.
- This keeps your Galaxy S6 safe from any malicious applications that might try to get root access from time to time when you don’t want them to have it.

1) Download Chainfire’s CF-Auto-Root for the Galaxy S6 Edge
2) Download and Install the Samsung USB Drivers
3) Extract the Chainfire CF-Auto-Root Zip File(from step 1)
4) Right Click the Odin v3.07 exe File and Run it as Administrator
5) Power Down the Galaxy S6 Edge
6) Boot the Galaxy S6 Edge into Download Mode
7) Connect the Galaxy S6 Edge to the PC via a Micro USB Cable
8) Click the PDA Button in Odin(on the right side)
9) Browse to and then Select the tar.md5 File Extracted in Step 3
10) Make sure the ‘F. Reset Time’ and the ‘Auto Reboot’ Options are the Only Options on the Left That Are Checked
11) Make Sure the ‘Re-Partition’ Option is NOT Checked
12) When Ready, Click the Start Button in Odin
13) When the Galaxy S6 Edge Boots Back into Android, Open the App Drawer and Launch the SuperSU App
14) Tap on Continue When Asked About Updating
15) Tap on Normal When Asked How it Should Update
16) Tap on the ‘OK’ Option When Asked if You Want to Disable KNOX
17) After KNOX is Disabled, Tell the Galaxy S6 Edge to Reboot

How to Backup Your Android Device with Nandroid
Nandroid is a utility that you can use to make backups of your phone - so HAVE TO USE CWM or TWRP???
A Nandroid backup will save your phone exactly as it is, and it’s easy to setup as long as you have a recovery service like CWM or TWRP installed.

Does My Device Need to Be Rooted?

The short answer is, not really.
You will need a recovery service such as CWM or TWRP to copy the data, so rooting your device is helpful.

(You can install TWRP by using developer options and USB Debugging on devices such as the Nexus 5, with no need for root access.)

Galaxy S6: How to Create a Nandroid Backup
The first thing that I always recommend doing after you setup a custom recovery on your Android device is to create a Nandroid backup.
So, Nandroid backup is ONLY possible after a custom recovery - Means CWM or TWRP installed!!